* Direct drive mod for 2.1 and 2.2.
* Add example image to direct drive mod readme.md
* Add assembly instructions to direct drive mod readme.md
* Fix m2.5-m2 assembly instructions bug in direct drive mod readme.md
* Add v6 direct drive mount.
E3d v6 is reported to be 1.1mm taller than the mosquito all mounted up.
This change should retain the nozzle elevation to help keep inductive
probes working if someone mounts a v6 to the BMG mount plate.
* direct drive model improvements
* make room for extra belt
* add 0.32mm seats for back side nuts
* Fix support arm model bug in v6
* drop the fan nozzle outlet as low as I dare
* add known issue
* Update README.md
* bmg mod: orient stls and add steps
* lowered z_accel, lowered square_corner_volocity
- Reduce z accel to safer values for 250 & 300mm configs.
- lowered square_corner_velocity to the default value of 5
* updated comments
- FSR was replaces by z switch
- removed extraneous line
* printer busy checks for macros
adds safeguards to macros that will interrupt a print
* printer busy checks for macros - 300mm
* printer busy checks for macros - 350
* updated config descriptions
* style harmonization
* fix z min switch pos
* Direct drive mod for 2.1 and 2.2.
* Add example image to direct drive mod readme.md
* Add assembly instructions to direct drive mod readme.md
* Fix m2.5-m2 assembly instructions bug in direct drive mod readme.md
* Add v6 direct drive mount.
E3d v6 is reported to be 1.1mm taller than the mosquito all mounted up.
This change should retain the nozzle elevation to help keep inductive
probes working if someone mounts a v6 to the BMG mount plate.
* direct drive model improvements
* make room for extra belt
* add 0.32mm seats for back side nuts
* Fix support arm model bug in v6
* drop the fan nozzle outlet as low as I dare
* add known issue
* Add 2.2 openbuilds chain mod
* added example render image to 2.2 openbuilds drag chain mod
* add taller x carriage mount for drag chain mod
* update openbuilds xy bridge
* pull back cable chain mount 3mm +x
* modify tube profile
* add 1mm mouth height
* add 1mm span width to curves
Update Bottom DXF, add 80mm Bottom and Back Fan Mounts (back requires cutting of charcoal filter), Pi Bracket for Pi with Heatsink Case, Short Nozzle Scrubber Holder, Skirts that take less material, re-add cable anchors for gantry
Co-Authored-By: Voron <vorondesign@users.noreply.github.com>
Co-Authored-By: FEBngineering <volcom8190@users.noreply.github.com>
* Add files via upload
Added 2-to-1 Adapter mount to mods/Danowar
* Add files via upload
Added dual Mobius mount to mods/Danowar
* Moved Folder
Moved folder to correct location
* Add files via upload
* Chnged Folder names to remove spaces
* Update README.md
* Added Humidity Sensor Bracket
