Contribution-focused fork of github:VoronDesign/Voron-2
738d83cce1
* Direct drive mod for 2.1 and 2.2. * Add example image to direct drive mod readme.md * Add assembly instructions to direct drive mod readme.md * Fix m2.5-m2 assembly instructions bug in direct drive mod readme.md * Add v6 direct drive mount. E3d v6 is reported to be 1.1mm taller than the mosquito all mounted up. This change should retain the nozzle elevation to help keep inductive probes working if someone mounts a v6 to the BMG mount plate. * direct drive model improvements * make room for extra belt * add 0.32mm seats for back side nuts * Fix support arm model bug in v6 * drop the fan nozzle outlet as low as I dare * add known issue * Add 2.2 openbuilds chain mod * added example render image to 2.2 openbuilds drag chain mod * add taller x carriage mount for drag chain mod * update openbuilds xy bridge * pull back cable chain mount 3mm +x * modify tube profile * add 1mm mouth height * add 1mm span width to curves |
||
|---|---|---|
| Docs | ||
| Drawings | ||
| DXFs | ||
| firmware/klipper | ||
| manuals | ||
| mods | ||
| slicer_profiles | ||
| STLs | ||
| .gitignore | ||
| LICENSE.md | ||
| README.md | ||
Voron 2.2
The fourth official release of the Voron 2.2 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!
