Contribution-focused fork of github:VoronDesign/Voron-2

Go to file

DunarDolorgiet 728759d63f Klipper configs - lower max_z_accel, default square_corner_velocity (#63 ) * lowered z_accel, lowered square_corner_volocity - Reduce z accel to safer values for 250 & 300mm configs. - lowered square_corner_velocity to the default value of 5 * updated comments - FSR was replaces by z switch - removed extraneous line		2019-11-06 18:59:02 +01:00
Docs	fix case issues with git	2019-10-07 09:51:59 -04:00
Drawings	fix case issues with git	2019-10-07 09:51:59 -04:00
DXFs	Many Small Updates and QOL items	2019-11-01 16:13:57 -04:00
firmware/klipper	Klipper configs - lower max_z_accel, default square_corner_velocity (#63 )	2019-11-06 18:59:02 +01:00
manuals	fix case issues with git	2019-10-07 09:51:59 -04:00
mods	Waveshare 5inch (B) LCD cover mod by orkusmg (#48 )	2019-11-06 18:50:47 +01:00
slicer_profiles	Removing old Slicer Configs	2019-10-19 11:16:30 -05:00
STLs	Adjust Z Tensioner Travel	2019-11-04 15:56:51 -05:00
.gitignore	Adding BeltChain for V2	2017-12-07 14:17:40 -08:00
LICENSE.md	fix case issues with git	2019-10-07 09:51:59 -04:00
README.md	fix case issues with git	2019-10-07 09:51:59 -04:00

README.md

Voron 2.2

The fourth official release of the Voron 2.2 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!