619d35d747
Screen case and Software solution for Waveshare 5inch HDMI LCD (B) The screen description can be found here: https://www.waveshare.com/wiki/5inch_HDMI_LCD_(B) |
||
|---|---|---|
| .. | ||
| 3D_Black | ||
| andreq/voron2 | ||
| Armstr0ng | ||
| ArmyAg08 | ||
| Chron | ||
| Danowar | ||
| daveidmx/VORON2 | ||
| Dunar/Panel_Rest | ||
| etherwalker/Pi_Zero_Camera_Mount | ||
| exquyre | ||
| FHeilmann | ||
| Fulg/VORON2/PanelDue5 | ||
| Glowtape | ||
| GSL12/wago_221_mount | ||
| GustavtheMighty/4.3-Paneldue_Case | ||
| hackdoggo/v2/bmgobius | ||
| hiemmer | ||
| Jass_on | ||
| JeJeff/VORON2.1 | ||
| Jink/VORON_2.1 | ||
| JustinVoelker/VORON2 | ||
| K1JWG/PanelDue7iLogo | ||
| Koios | ||
| nemgrea | ||
| OrkusMG/Waveshare5inchHDMILCDscreenCover | ||
| pnokel | ||
| Railgunner/10mmBMGx2 | ||
| Seamen/RAMPS-Extender_holder | ||
| Sparreau | ||
| Stephan | ||
| steve450/Voron2.1 | ||
| synfinatic | ||
| warriorofwire/openbuilds_drag_chain | ||
| wile.e.coyote | ||
| README.md | ||
Mods
A neatly structured list of all the content in each folder
Remember to update this README when uploading new mods!
List structure
The list should be structured in the following way:
"Creator of mods"
"Mods name"
- "Small desciption of the mod"
"Mod 2's name"
- "Small desciption of the mod"
3D_Black
- Different fan covers for 40mm fans.
Andreq
- Tool used for grinding flats on a shaft at specific places.
Armstr0ng
- A mount for aluminium LED extrusions with hidden fasteners
ArmyAg08
- Different C270 camera mounts, attached to the extrusions.
- Corner panel clip that fit 3mm or 1/8" panels with foam tape.
Chron
- Configuration for SKR 1.3 TMC2208 UART
Danowar
- Mounts two Mobius Extruders to the back of the printer.
- Mounts for FYSETCS F6 controller boards.
- Klipper config for a FYSETC F6 350 build.
- Mount for Humidity/Temperature sensor.
- Spool holder with built in weight scale.
TL 2-to-1 Mosquito Toolhead Adapter
- Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead.
- Detachable mount for tablet using magnets.
Dunar
- External panel holder
FHeilmann
- Parts modified for extrusions with 5mm gap.
- Parts modified for extrusions with 5mm gap.
Fulg
- Mount for the PanelDue5 LCD display.
GSL12
Glowtape
GustavTheMighty
- Case/mount for the 4.3 PanelDue LCD Display.
Hackdoggo
- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
Jass_on
- Panel clips and handles for using tempered glass side panels.
- SKR 1.3 mount with built in 40mm fan mount.
JeJeff
- Slot covers for extrusions with 5mm slot width.
- Cable tie mounts for 4mm cable ties.
- Main Plug Panel modified to hold a RJ45 ethernet socket.
Jink
- Mount / Bracket supporting the coroplast sheets.
- Mirrored RAMPS bracket.
- Mount for 3x WAGO connectors.
JustinVoelker
- Mains plug panel with ethernet cutout.
K1JWG
- Custom Voron 2 logo for use as a PanelDue 7i startup splash screen.
Koios
- Front panel locks for 6mm tempered glass panels.
- Mount for C920 secured to the top front extrusion.
- Different mounts for LED light bars.
OrkusMG
- Display Cover for the Waveshare 5 inch HDMI LCD screen.
Railgunner
- Dual direct drive using 2x Bondtech BMG.
Seamen
- Mount for RAMPS board with the stepper extender.
Sparreau
- Bracket for mounting the FSR PCB.
- Mount for attaching a dial indicator to the X Carriage.
- Scalable mains plug panel with small modifications.
- An extra tab added to the Z idler to prevent sagging / rotation.
Stephan
- Drop in replacement of the stock probe to a M12.
- Drop in replacement of the stock probe to a BLTouch.
daveidmx
- 30mm fan adapter for the X carriage.
etherwalker
exquyre
- Case for Anet 12864 LCD display.
- Mount for 12V LED bars to the top extrusions.
- Room for 3-4 20AWG wires.
- Mounting bracket for 1 Einsy and 1 RAMPS.
hiemmer
- Tool holder for calipers, screwdriver etc.
nemgrea
- Hinges, handles and magnet mounts for creating a split front door panel.
pnokel
- Small mount to secure wires with zip ties.
- Different coroplast holders for added support.
- 14.5mm toothed idler.
steve450
- Corner brackets preventing rotation of the extrusions, and stiffening the joints.
Also covers the Z-belt hole for improved aesthetics.
synfinatic
- Duet/Duex fan mount with air vents directly above the steppers to increase airflow.
- Mount for emergency button attached to the top of the printer.
- Mount for filament drybox attached to the side of the printer.
- Mount for LED lightbars.
- Extra bracket to keep the power supply in place.
- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient.
warriorofwire
- Collection of models for using an off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck.
wile.e.coyote
- Support for the coroplast to prevent sagging.
- Mounting bracket for 2 buck converters.
- Mount for brass brush. Used for cleaning nozzle before printing.
- Different mounts for Wago connectors.