Contribution-focused fork of github:VoronDesign/Voron-2

Go to file

Kenny 2e75742c0c Re-add BMG mod for 2.1 / 2.2 (#62 ) * Direct drive mod for 2.1 and 2.2. * Add example image to direct drive mod readme.md * Add assembly instructions to direct drive mod readme.md * Fix m2.5-m2 assembly instructions bug in direct drive mod readme.md * Add v6 direct drive mount. E3d v6 is reported to be 1.1mm taller than the mosquito all mounted up. This change should retain the nozzle elevation to help keep inductive probes working if someone mounts a v6 to the BMG mount plate. * direct drive model improvements * make room for extra belt * add 0.32mm seats for back side nuts * Fix support arm model bug in v6 * drop the fan nozzle outlet as low as I dare * add known issue * Update README.md * bmg mod: orient stls and add steps		2019-11-07 18:45:19 -05:00
Docs	fix case issues with git	2019-10-07 09:51:59 -04:00
Drawings	fix case issues with git	2019-10-07 09:51:59 -04:00
DXFs	Many Small Updates and QOL items	2019-11-01 16:13:57 -04:00
firmware/klipper	Klipper configs - lower max_z_accel, default square_corner_velocity (#63 )	2019-11-06 18:59:02 +01:00
manuals	fix case issues with git	2019-10-07 09:51:59 -04:00
mods	Re-add BMG mod for 2.1 / 2.2 (#62 )	2019-11-07 18:45:19 -05:00
slicer_profiles	Removing old Slicer Configs	2019-10-19 11:16:30 -05:00
STLs	Repair STL issues with XY Bridge and Idler Frame, side skirts were 1mm short (#61 )	2019-11-06 20:03:13 +01:00
.gitignore	Adding BeltChain for V2	2017-12-07 14:17:40 -08:00
LICENSE.md	fix case issues with git	2019-10-07 09:51:59 -04:00
README.md	fix case issues with git	2019-10-07 09:51:59 -04:00

README.md

Voron 2.2

The fourth official release of the Voron 2.2 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!