Contribution-focused fork of github:VoronDesign/Voron-2

Go to file

John Jardine 59f8f7be7d replace x carriage 2.1 mount with one that works, add chamfer to bottom of blanking plate (#66 )		2019-11-08 19:47:32 -05:00
Docs	fix case issues with git	2019-10-07 09:51:59 -04:00
Drawings	fix case issues with git	2019-10-07 09:51:59 -04:00
DXFs	Many Small Updates and QOL items	2019-11-01 16:13:57 -04:00
firmware/klipper	Klipper configs - lower max_z_accel, default square_corner_velocity (#63 )	2019-11-06 18:59:02 +01:00
manuals	fix case issues with git	2019-10-07 09:51:59 -04:00
mods	Re-add BMG mod for 2.1 / 2.2 (#62 )	2019-11-07 18:45:19 -05:00
slicer_profiles	Removing old Slicer Configs	2019-10-19 11:16:30 -05:00
STLs	replace x carriage 2.1 mount with one that works, add chamfer to bottom of blanking plate (#66 )	2019-11-08 19:47:32 -05:00
.gitignore	Adding BeltChain for V2	2017-12-07 14:17:40 -08:00
LICENSE.md	fix case issues with git	2019-10-07 09:51:59 -04:00
README.md	fix case issues with git	2019-10-07 09:51:59 -04:00

README.md

Voron 2.2

The fourth official release of the Voron 2.2 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!