This changes "git-foo" to "git foo" when message strings in tests
name git subcommands.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use "git hash-object" and "git rev-parse" without dash.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some places use the standard malloc/strdup without checking if the
allocation was successful; they should use xmalloc/xstrdup that
check the memory allocation result.
Signed-off-by: Dotan Barak <dotanba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
User notifications are presented as 'git cmd', and code comments
are presented as '"cmd"' or 'git's cmd', rather than 'git-cmd'.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing in-code comment was misleading. An access that is not
"reading" may often be "writing", but it does not have to be.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
OS X sed doesn't understand '\n' on the right side of a substitution.
Use a valid substitution character instead and use 'tr' to convert
those to a newline.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The non-verbose output was not changed in fdb2a2a (compat: introduce
on_disk_bytes(), 2008-08-18) which caused git-count-objects to claim 512
times too much space used for loose objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason that git-shell was excluded from the Windows build was that
our compatibility layer needed stuff that was removed when we tried to
link less of the git library into git-shell. Since 4cfc24a (shell: do
not play duplicated definition games to shrink the executable,
2008-08-19) the complete library is linked again, so we can build
git-shell on Windows as well. (This fixes 'make install', which depends
on that git-shell is always built.)
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces 'git-svn' with 'git svn' in the tests.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subversion tests use too many "git-foo" form, so I am converting them
in two steps.
This first step replaces literal strings "remotes/git-svn" and "git-svn-id"
by introducing $remotes_git_svn and $git_svn_id constants defined as shell
variables. This will reduce the number of false hits from "git grep".
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will always print the class-name rather
than the name of the function inside that class.
While we're at it, reorder the gitattributes manpage to
list the built-in funcname pattern names in alphabetical
order.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently do_switch() tolerates the lack of escaping in less
funky branch names. For the really strange and scary ones, we
need to escape them properly. It strangely maintains compatible
with the existing handling of branch names with spaces and
exclamation marks.
Reported-by: m.skoric@web.de ($gmane/94677)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* git://git.bogomips.org/git-svn:
git-svn: set auto_props when renaming files
t9124: clean up chdir usage
git-svn: fix 'info' tests for unknown items
git-svn: match SVN 1.5 behaviour of info' on unknown item
git svn info: always quote URLs in 'info' output
git svn info: make info relative to the current directory
git svn info: tests: fix ptouch argument order in setup
git svn info: tests: use test_cmp instead of git-diff
git svn info: tests: do not use set -e
git svn info: tests: let 'init' test run with SVN 1.5
git svn: catch lack of upstream info for dcommit earlier
git-svn: check error code of send_txstream
git-svn: Send deltas during commits
git-svn: Introduce SVN::Git::Editor::_chg_file_get_blob
git-svn: extract base blob in generate_diff
Patch-by: Paul Talacko <gnuruandstuff@yahoo.co.uk>:
<http://article.gmane.org/gmane.comp.version-control.git/95006>
> Hello,
>
> There's an issue in git-svn as autoprops are not applied to
> renamed files, only to added files.
>
> This patch fixes the bug.
[ew: added test case]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Spawn subshells when running things in subdirectories instead of
chdir-ing to the path of an undefined variable, which is
confusing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Merge git://repo.or.cz/git-gui and git://git.kernel.org/pub/scm/gitk/gitk
* git://repo.or.cz/git-gui:
git-gui: Show special diffs for complex conflict cases.
git-gui: Make F5 reselect a diff, if an untracked file is selected.
git-gui: Reimplement and enhance auto-selection of diffs.
git-gui: Support conflict states _U & UT.
git-gui: Support more merge tools.
git-gui: Don't allow staging files with conflicts.
git-gui: Support calling merge tools.
git-gui: Support resolving conflicts via the diff context menu.
git-gui: Mark forgotten strings for translation.
git-gui: Allow specifying an initial line for git gui blame.
git-gui: Better positioning in Blame Parent Commit
git-gui: Support passing blame to a parent commit.
git-gui: Support starting gitk from Gui Blame
git-gui: Teach git gui about file type changes
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add menu item for calling git gui blame
gitk: Add option to specify the default commit on command line
* maint:
Update draft release notes for 1.6.0.2
stash: refresh the index before deciding if the work tree is dirty
Mention the fact that 'git annotate' is only for backward compatibility.
"blame -c" should be compatible with "annotate"
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
Unlike the case where the user does have a real change in the work tree,
refusing to work because of unclean stat information is not very helpful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Nanako Shiraishi <nanako3@lavabit.com>
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Fix diff parsing for lines starting with "--" or "++"
git-gui: Fix string escaping in po2msg.sh
git gui: show diffs with a minimum of 1 context line
git-gui: update all remaining translations to French.
git-gui: Update french translation
The previous tests all expected the results from SVN and Git to be
identical, and expected both to return success. This cannot be
guaranteed: SVN changed the message style between 1.4 and 1.5, and
in 1.5, sets a failure exit code.
Change the tests to verify that 'git svn info <item>' sets a failure
exit code, and that its output contains the file name. This should
hopefully catch all other errors.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously 'git svn info unknown-file' only announced its failure (in
the SVN 1.4 style, "not a versioned resource"), and exited
successfully.
It is desirable to actually exit with failure, so change the code to
exit(1) under this condition. Since that is already halfway SVN 1.5
compatibility, also change the error output to match 1.5.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Changes 'git svn info' to always URL-escape the 'URL' and 'Repository'
fields and --url output, like SVN (at least 1.5) does.
Note that reusing the escape_url() further down in Git::SVN::Ra is not
possible because it only triggers for http(s) URLs. I did not know
whether extending it to all schemes would break SVN access anywhere,
so I made a new one that quotes in all schemes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Previously 'git svn info <path>' would always treat the <path> as
relative to the working directory root, with a default of ".". This
does not match the behaviour of 'svn info'. Prepend $(git rev-parse
--show-prefix) to the path used inside cmd_info to make it relative to
the current working directory.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
The arguments must be <gitwc-path> <svnwc-path>, otherwise it fails to
update the timestamps (without setting a failure exit code) and
results in bad test output later on.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
git-diff does not appear to return the correct exit values, and gives
a false success for more than half (!) of the tests due to the space
in "trash directory" which git-svn fails to encode.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Exiting in the middle of a test confuses the test suite, which will
just say "FATAL: Unexpected exit with code 1" in response to a failed
test, instead of actually diagnosing failure and continuing with the
next test.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Since 711521e 'git svn dcommit' attempts to use the upstream
information to determine the SVN URL, before it verifies that it even
found an upstream. Move up the corresponding check.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Eric Wong <normalperson@yhbt.net>
Not checking the error code of a function used to transform and
send data makes me nervous. It currently returns "undef" on
success; so die if we get any result other than "undef" because
it's likely something went wrong somewhere. I really wish this
function returned an MD5 like send_stream (or better yet, SHA1)
for verification.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We need the base blob to compute a delta to be sent to the server.
Signed-off-by: Florian Weimer <fw@deneb.enyo.de>
Acked-by: Eric Wong <normalperson@yhbt.net>
When somebody is reading git-blame.txt (or git-annotate.txt) for the first
time, the message we would like to send is:
(1) Here is why you would want to use this command, what it can do
(perhaps more than what you would have expected from "$scm blame"),
and how you tell it to do what it does.
This is obvious.
(2) You might have heard of the command with the other name. There is no
difference between the two, except they differ in their default
output formats.
This is essential to answer: "git has both? how are they different?"
(3) We tend to encourage blame over annotate for new scripts and new
people, but there is no reason to choose one over the other.
This is not as important as (2), but would be useful to avoid
repeated questions about "when will we start deprecating this?"
As long as we describe (2) on git-annotate page clearly enough, people who
read git-blame page first and get curious can refer to git-annotate page.
While at it, subtly hint (3) without being overly explicit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
Noticed by Pasky.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Languages like Lua and SQL use "--" to mark a line as commented out.
If this appears at column 0 and is part of the pre-image we may see
"--- foo" in the diff, indicating that the line whose content is
"-- foo" has been removed from the new version.
git-gui was incorrectly parsing "--- foo" as the old file name
in the file header, causing it to generate a bad patch file when
the user tried to stage or unstage a hunk or the selected line.
We need to keep track of where we are in the parsing so that we do
not misread a deletion or addition record as part of the header.
Reported-by: Alexander Gladysh <agladysh@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Add special handling for displaying diffs of modified/deleted,
and symlink/mode conflicts. Currently the display is completely
unusable for deciding how to resolve the conflict.
New display modes:
1) Deleted/Modified conflict: e.g.
LOCAL: deleted
REMOTE:
[diff :1:$path :3:$path]
2) Conflict involving symlinks:
LOCAL:
[diff :1:$path :2:$path]
REMOTE:
[diff :1:$path :3:$path]
In order to be able to display multiple diffs, this
patch adds a queue of commands to call.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Nanako Shiraishi
Junio C Hamano
Dotan Barak
Heikki Orsila
Christian Couder
Arjen Laarhoven
Mikael Magnusson
Johannes Sixt
Andreas Ericsson
Eric Wong
Paul Talacko
Thomas Rast
Florian Weimer
Shawn O. Pearce
Alexander Gavrilov