"git merge" learned to selectively omit " into <branch>" at the end
of the title of default merge message with merge.suppressDest
configuration.
* jc/fmt-merge-msg-suppress-destination:
fmt-merge-msg: allow merge destination to be omitted again
Revert "fmt-merge-msg: stop treating `master` specially"
b6839fda68 (ref-filter: add support for %(contents:size), 2020-07-16)
added a new format for ref-filter, and added a function to generate
tests for this new feature in t6300. Unfortunately, it tries to run
`test_expect_sucess' instead of `test_expect_success', and writes
$expect to `expected', but tries to read `expect'. Those two issues
were probably unnoticed because the script only printed errors, but did
not crash. This fixes these issues.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
523fa69c (reflog: cleanse messages in the refs.c layer, 2020-07-10)
centralized reflog normalizaton. However, the normalizaton added a
leading "\t" to the message. This is an artifact of the reflog
storage format in the files backend, so it should be added there.
Routines that parse back the reflog (such as grab_nth_branch_switch)
expect the "\t" to not be in the message, so without this fix, git
with reftable cannot process the "@{-1}" syntax.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI fixup---tests of Python scripts didn't use the version of Git
that is being tested.
* sg/ci-git-path-fix-with-pyenv:
ci: use absolute PYTHON_PATH in the Linux jobs
"git mv src dst", when src is an unmerged path, errored out
correctly but with an incorrect error message to claim that src is
not tracked, which has been clarified.
* ct/mv-unmerged-path-error:
git-mv: improve error message for conflicted file
Pushing a ref whose name contains non-ASCII character with the
"--force-with-lease" option did not work over smart HTTP protocol,
which has been corrected.
* bc/push-cas-cquoted-refname:
remote-curl: make --force-with-lease work with non-ASCII ref names
"git for-each-ref --format=<>" learned %(contents:size).
* cc/pretty-contents-size:
ref-filter: add support for %(contents:size)
t6300: test refs pointing to tree and blob
Documentation: clarify %(contents:XXXX) doc
Fetching from a lazily cloned repository resulted at the server
side in attempts to lazy fetch objects that the client side has,
many of which will not be available from the third-party anyway.
* jt/avoid-lazy-fetching-upon-have-check:
upload-pack: do not lazy-fetch "have" objects
Dev support to limit the use of test_must_fail to only git commands.
* dl/test-must-fail-fixes-6:
test-lib-functions: restrict test_must_fail usage
t9400: don't use test_must_fail with cvs
t9834: remove use of `test_might_fail p4`
t7107: don't use test_must_fail()
t5324: reorder `run_with_limited_open_files test_might_fail`
t3701: stop using `env` in force_color()
With the base fix to 2.27 regresion, any new extensions in a v0
repository would still be silently honored, which is not quite
right. Instead, complain and die loudly.
* jk/reject-newer-extensions-in-v0:
verify_repository_format(): complain about new extensions in v0 repo
Preliminary clean-up of the refs API in preparation for adding a
new refs backend "reftable".
* hn/reftable:
reflog: cleanse messages in the refs.c layer
bisect: treat BISECT_HEAD as a pseudo ref
t3432: use git-reflog to inspect the reflog for HEAD
lib-t6000.sh: write tag using git-update-ref
"git clone --separate-git-dir=$elsewhere" used to stomp on the
contents of the existing directory $elsewhere, which has been
taught to fail when $elsewhere is not an empty directory.
* bw/fail-cloning-into-non-empty:
git clone: don't clone into non-empty directory
"git help log" has been enhanced by sharing more material from the
documentation for the underlying "git rev-list" command.
* pb/log-rev-list-doc:
git-log.txt: include rev-list-description.txt
git-rev-list.txt: move description to separate file
git-rev-list.txt: tweak wording in set operations
git-rev-list.txt: fix Asciidoc syntax
revisions.txt: describe 'rev1 rev2 ...' meaning for ranges
git-log.txt: add links to 'rev-list' and 'diff' docs
The test framework has been updated so that most tests will run
with predictable (artificial) timestamps.
* jk/tests-timestamp-fix:
t9100: stop depending on commit timestamps
test-lib: set deterministic default author/committer date
t9100: explicitly unset GIT_COMMITTER_DATE
t5539: make timestamp requirements more explicit
t9700: loosen ident timezone regex
t6000: use test_tick consistently
Updates to the changed-paths bloom filter.
* ds/commit-graph-bloom-updates:
commit-graph: check all leading directories in changed path Bloom filters
revision: empty pathspecs should not use Bloom filters
revision.c: fix whitespace
commit-graph: check chunk sizes after writing
commit-graph: simplify chunk writes into loop
commit-graph: unify the signatures of all write_graph_chunk_*() functions
commit-graph: persist existence of changed-paths
bloom: fix logic in get_bloom_filter()
commit-graph: change test to die on parse, not load
commit-graph: place bloom_settings in context
The changed-path Bloom filter is improved using ideas from an
independent implementation.
* sg/commit-graph-cleanups:
commit-graph: simplify write_commit_graph_file() #2
commit-graph: simplify write_commit_graph_file() #1
commit-graph: simplify parse_commit_graph() #2
commit-graph: simplify parse_commit_graph() #1
commit-graph: clean up #includes
diff.h: drop diff_tree_oid() & friends' return value
commit-slab: add a function to deep free entries on the slab
commit-graph-format.txt: all multi-byte numbers are in network byte order
commit-graph: fix parsing the Chunk Lookup table
tree-walk.c: don't match submodule entries for 'submod/anything'
In Git 2.28, we stopped special casing 'master' when producing the
default merge message by just removing the code to squelch "into
'master'" at the end of the message.
Introduce multi-valued merge.suppressDest configuration variable
that gives a set of globs to match against the name of the branch
into which the merge is being made, to let users specify for which
branch fmt-merge-msg's output should be shortened. When it is not
set, 'master' is used as the sole value of the variable by default.
The above move mostly reverts the pre-2.28 default in repositories
that have no relevant configuration.
Add a few tests to protect the behaviour with the new configuration
variable from future regression.
Helped-by: Linus Torvalds <torvalds@linux-foundation.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 489947cee5095b168cbac111ff7bd1eadbbd90dd, which
stopped treating merges into the 'master' branch as special when
preparing the default merge message. As the goal was not to have
any single branch designated as special, it solved it by leaving the
"into <branchname>" at the end of the title of the default merge
message for any and all branches. An obvious and easy alternative
to treat everybody equally could have been to remove it for every
branch, but that involves loss of information.
We'll introduce a new mechanism to let end-users specify merges into
which branches would omit the "into <branchname>" from the title of
the default merge message, and make the mechanism, when unconfigured,
treat the traditional 'master' special again, so all the changes to
the tests we made earlier will become unnecessary, as these tests
will be run without configuring the said new mechanism.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit fixes a couple of minor spelling mistakes inside
comments.
Signed-off-by: Steve Kemp <steve@steve.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typos introduced in commit a133737b80 ("doc: include --guide option
description for "git help"", 2013-04-02).
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_object_or_die() is passed an object ID and a name to show if the
object cannot be parsed. If the name is NULL then it shows the
hexadecimal object ID. Use that feature instead of preparing and
passing the hexadecimal representation to the function proactively.
That's shorter and a bit more efficient.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "reference transaction" hook was introduced in commit 6754159767
(refs: implement reference transaction hook, 2020-06-19). The name of
the hook is declared as "reference-transaction" in "refs.c" and
testcases, but the name declared in "githooks.txt" is different.
Signed-off-by: Bojun Chen <bojun.cbj@alibaba-inc.com>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our test suite, when 'git p4' invokes a Git command as a
subprocesses, then it should run the 'git' binary we are testing.
Unfortunately, this is not the case in the 'linux-clang' and
'linux-gcc' jobs on Travis CI, where 'git p4' runs the system
'/usr/bin/git' instead.
Travis CI's default Linux image includes 'pyenv', and all Python
invocations that involve PATH lookup go through 'pyenv', e.g. our
'PYTHON_PATH=$(which python3)' sets '/opt/pyenv/shims/python3' as
PYTHON_PATH, which in turn will invoke '/usr/bin/python3'. Alas, the
'pyenv' version included in this image is buggy, and prepends the
directory containing the Python binary to PATH even if that is a
system directory already in PATH near the end. Consequently, 'git p4'
in those jobs ends up with its PATH starting with '/usr/bin', and then
runs '/usr/bin/git'.
So use the absolute paths '/usr/bin/python{2,3}' explicitly when
setting PYTHON_PATH in those Linux jobs to avoid the PATH lookup and
thus the bogus 'pyenv' from interfering with our 'git p4' tests.
Don't bother with special-casing Travis CI: while this issue doesn't
affect the corresponding Linux jobs on GitHub Actions, both CI systems
use Ubuntu LTS-based images, so we can safely rely on these Python
paths.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-pack documentation explicitly states that the pack
name is derived from the sorted list of object names, but
since commit 1190a1acf800 ("pack-objects: name pack files
after trailer hash") that isn't true anymore.
Be less explicit in the docs as to what the exact output is,
and just say that it's whatever goes into the pack name.
Also update a comment on write_idx_file() since it no longer
modifies the sha1 variable (it's const now anyway), as noted
by Junio.
Fixes: 1190a1acf800 ("pack-objects: name pack files after trailer hash")
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we invoke a remote transport helper and pass an option with an
argument, we quote the argument as a C-style string if necessary. This
is the case for the cas option, which implements the --force-with-lease
command-line flag, when we're passing a non-ASCII refname.
However, the remote curl helper isn't designed to parse such an
argument, meaning that if we try to use --force-with-lease with an HTTP
push and a non-ASCII refname, we get an error like this:
error: cannot parse expected object name '0000000000000000000000000000000000000000"'
Note the double quote, which get_oid has reminded us is not valid in an
hex object ID.
Even if we had been able to parse it, we would send the wrong data to
the server: we'd send an escaped ref, which would not behave as the user
wanted and might accidentally result in updating or deleting a ref we
hadn't intended.
Since we need to expect a quoted C-style string here, just check if the
first argument is a double quote, and if so, unquote it. Note that if
the refname contains a double quote, then we will have double-quoted it
already, so there is no ambiguity.
We test for this case only in the smart protocol, since the DAV-based
protocol is not capable of handling this capability. We use UTF-8
because this is nicer in our tests and friendlier to Windows, but the
code should work for all non-ASCII refs.
While we're at it, since the name of the option is now well established
and isn't going to change, let's inline it instead of using the #define
constant.
Reported-by: Frej Bjon <frej.bjon@nemit.fi>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
