Often it is useful to both:
- have relatively few packfiles in a repository, and
- avoid having so few packfiles in a repository that we repack its
entire contents regularly
This patch implements a '--geometric=<n>' option in 'git repack'. This
allows the caller to specify that they would like each pack to be at
least a factor times as large as the previous largest pack (by object
count).
Concretely, say that a repository has 'n' packfiles, labeled P1, P2,
..., up to Pn. Each packfile has an object count equal to 'objects(Pn)'.
With a geometric factor of 'r', it should be that:
objects(Pi) > r*objects(P(i-1))
for all i in [1, n], where the packs are sorted by
objects(P1) <= objects(P2) <= ... <= objects(Pn).
Since finding a true optimal repacking is NP-hard, we approximate it
along two directions:
1. We assume that there is a cutoff of packs _before starting the
repack_ where everything to the right of that cut-off already forms
a geometric progression (or no cutoff exists and everything must be
repacked).
2. We assume that everything smaller than the cutoff count must be
repacked. This forms our base assumption, but it can also cause
even the "heavy" packs to get repacked, for e.g., if we have 6
packs containing the following number of objects:
1, 1, 1, 2, 4, 32
then we would place the cutoff between '1, 1' and '1, 2, 4, 32',
rolling up the first two packs into a pack with 2 objects. That
breaks our progression and leaves us:
2, 1, 2, 4, 32
^
(where the '^' indicates the position of our split). To restore a
progression, we move the split forward (towards larger packs)
joining each pack into our new pack until a geometric progression
is restored. Here, that looks like:
2, 1, 2, 4, 32 ~> 3, 2, 4, 32 ~> 5, 4, 32 ~> ... ~> 9, 32
^ ^ ^ ^
This has the advantage of not repacking the heavy-side of packs too
often while also only creating one new pack at a time. Another wrinkle
is that we assume that loose, indexed, and reflog'd objects are
insignificant, and lump them into any new pack that we create. This can
lead to non-idempotent results.
Suggested-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a recent patch we added a function 'find_kept_pack_entry()' to look
for an object only among kept packs.
While this function avoids doing any lookup work in non-kept packs, it
is still linear in the number of packs, since we have to traverse the
linked list of packs once per object. Let's cache a reduced version of
that list to save us time.
Note that this cache will last the lifetime of the program. We could
invalidate it on reprepare_packed_git(), but there's not much point in
being rigorous here:
- we might already fail to notice new .keep packs showing up after the
program starts. We only reprepare_packed_git() when we fail to find
an object. But adding a new pack won't cause that to happen.
Somebody repacking could add a new pack and delete an old one, but
most of the time we'd have a descriptor or mmap open to the old
pack anyway, so we might not even notice.
- in pack-objects we already cache the .keep state at startup, since
56dfeb6263 (pack-objects: compute local/ignore_pack_keep early,
2016-07-29). So this is just extending that concept further.
- we don't have to worry about any packed_git being removed; we always
keep the old structs around, even after reprepare_packed_git()
We do defensively invalidate the cache in case the set of kept packs
being asked for changes (e.g., only in-core kept packs were cached, but
suddenly the caller also wants on-disk kept packs, too). In theory we
could build all three caches and switch between them, but it's not
necessary, since this patch (and series) never changes the set of kept
packs that it wants to inspect from the cache.
So that "optimization" is more about being defensive in the face of
future changes than it is about asking for multiple kinds of kept packs
in this patch.
Here are p5303 results (as always, measured against the kernel):
Test HEAD^ HEAD
-----------------------------------------------------------------------------------------------
5303.5: repack (1) 57.34(54.66+10.88) 56.98(54.36+10.98) -0.6%
5303.6: repack with kept (1) 57.38(54.83+10.49) 57.17(54.97+10.26) -0.4%
5303.11: repack (50) 71.70(88.99+4.74) 71.62(88.48+5.08) -0.1%
5303.12: repack with kept (50) 72.58(89.61+4.78) 71.56(88.80+4.59) -1.4%
5303.17: repack (1000) 217.19(491.72+14.25) 217.31(490.82+14.53) +0.1%
5303.18: repack with kept (1000) 246.12(520.07+14.93) 217.08(490.37+15.10) -11.8%
and the --stdin-packs case, which scales a little bit better (although
not by that much even at 1,000 packs):
5303.7: repack with --stdin-packs (1) 0.00(0.00+0.00) 0.00(0.00+0.00) =
5303.13: repack with --stdin-packs (50) 3.43(11.75+0.24) 3.43(11.69+0.30) +0.0%
5303.19: repack with --stdin-packs (1000) 130.50(307.15+7.66) 125.13(301.36+8.04) -4.1%
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we have find_kept_pack_entry(), we don't have to manually keep
hunting through every pack to find a possible "kept" duplicate of the
object. This should be faster, assuming only a portion of your total
packs are actually kept.
Note that we have to re-order the logic a bit here; we can deal with the
disqualifying situations first (e.g., finding the object in a non-local
pack with --local), then "kept" situation(s), and then just fall back to
other "--local" conditions.
Here are the results from p5303 (measurements again taken on the
kernel):
Test HEAD^ HEAD
-----------------------------------------------------------------------------------------------
5303.5: repack (1) 57.26(54.59+10.84) 57.34(54.66+10.88) +0.1%
5303.6: repack with kept (1) 57.33(54.80+10.51) 57.38(54.83+10.49) +0.1%
5303.11: repack (50) 71.54(88.57+4.84) 71.70(88.99+4.74) +0.2%
5303.12: repack with kept (50) 85.12(102.05+4.94) 72.58(89.61+4.78) -14.7%
5303.17: repack (1000) 216.87(490.79+14.57) 217.19(491.72+14.25) +0.1%
5303.18: repack with kept (1000) 665.63(938.87+15.76) 246.12(520.07+14.93) -63.0%
and the --stdin-packs timings:
5303.7: repack with --stdin-packs (1) 0.01(0.01+0.00) 0.00(0.00+0.00) -100.0%
5303.13: repack with --stdin-packs (50) 3.53(12.07+0.24) 3.43(11.75+0.24) -2.8%
5303.19: repack with --stdin-packs (1000) 195.83(371.82+8.10) 130.50(307.15+7.66) -33.4%
So our repack with an empty .keep pack is roughly as fast as one without
a .keep pack up to 50 packs. But the --stdin-packs case scales a little
better, too.
Notably, it is faster than a repack of the same size and a kept pack. It
looks at fewer objects, of course, but the penalty for looking at many
packs isn't as costly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add two new tests to measure repack performance. Both tests split the
repository into synthetic "pushes", and then leave the remaining objects
in a big base pack.
The first new test marks an empty pack as "kept" and then passes
--honor-pack-keep to avoid including objects in it. That doesn't change
the resulting pack, but it does let us compare to the normal repack case
to see how much overhead we add to check whether objects are kept or
not.
The other test is of --stdin-packs, which gives us a sense of how that
number scales based on the number of packs we provide as input. In each
of those tests, the empty pack isn't considered, but the residual pack
(objects that were left over and not included in one of the synthetic
push packs) is marked as kept.
(Note that in the single-pack case of the --stdin-packs test, there is
nothing do since there are no non-excluded packs).
Here are some timings on a recent clone of the kernel:
5303.5: repack (1) 57.26(54.59+10.84)
5303.6: repack with kept (1) 57.33(54.80+10.51)
in the 50-pack case, things start to slow down:
5303.11: repack (50) 71.54(88.57+4.84)
5303.12: repack with kept (50) 85.12(102.05+4.94)
and by the time we hit 1,000 packs, things are substantially worse, even
though the resulting pack produced is the same:
5303.17: repack (1000) 216.87(490.79+14.57)
5303.18: repack with kept (1000) 665.63(938.87+15.76)
That's because the code paths around handling .keep files are known to
scale badly; they look in every single pack file to find each object.
Our solution to that was to notice that most repos don't have keep
files, and to make that case a fast path. But as soon as you add a
single .keep, that part of pack-objects slows down again (even if we
have fewer objects total to look at).
Likewise, the scaling is pretty extreme on --stdin-packs (but each
subsequent test is also being asked to do more work):
5303.7: repack with --stdin-packs (1) 0.01(0.01+0.00)
5303.13: repack with --stdin-packs (50) 3.53(12.07+0.24)
5303.19: repack with --stdin-packs (1000) 195.83(371.82+8.10)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are in a helper function, so the usual chain-lint doesn't notice
them. This function is still not perfect, as it has some git invocations
on the left-hand-side of the pipe, but it's primary purpose is timing,
not finding bugs or correctness issues.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an upcoming commit, 'git repack' will want to create a pack comprised
of all of the objects in some packs (the included packs) excluding any
objects in some other packs (the excluded packs).
This caller could iterate those packs themselves and feed the objects it
finds to 'git pack-objects' directly over stdin, but this approach has a
few downsides:
- It requires every caller that wants to drive 'git pack-objects' in
this way to implement pack iteration themselves. This forces the
caller to think about details like what order objects are fed to
pack-objects, which callers would likely rather not do.
- If the set of objects in included packs is large, it requires
sending a lot of data over a pipe, which is inefficient.
- The caller is forced to keep track of the excluded objects, too, and
make sure that it doesn't send any objects that appear in both
included and excluded packs.
But the biggest downside is the lack of a reachability traversal.
Because the caller passes in a list of objects directly, those objects
don't get a namehash assigned to them, which can have a negative impact
on the delta selection process, causing 'git pack-objects' to fail to
find good deltas even when they exist.
The caller could formulate a reachability traversal themselves, but the
only way to drive 'git pack-objects' in this way is to do a full
traversal, and then remove objects in the excluded packs after the
traversal is complete. This can be detrimental to callers who care
about performance, especially in repositories with many objects.
Introduce 'git pack-objects --stdin-packs' which remedies these four
concerns.
'git pack-objects --stdin-packs' expects a list of pack names on stdin,
where 'pack-xyz.pack' denotes that pack as included, and
'^pack-xyz.pack' denotes it as excluded. The resulting pack includes all
objects that are present in at least one included pack, and aren't
present in any excluded pack.
To address the delta selection problem, 'git pack-objects --stdin-packs'
works as follows. First, it assembles a list of objects that it is going
to pack, as above. Then, a reachability traversal is started, whose tips
are any commits mentioned in included packs. Upon visiting an object, we
find its corresponding object_entry in the to_pack list, and set its
namehash parameter appropriately.
To avoid the traversal visiting more objects than it needs to, the
traversal is halted upon encountering an object which can be found in an
excluded pack (by marking the excluded packs as kept in-core, and
passing --no-kept-objects=in-core to the revision machinery).
This can cause the traversal to halt early, for example if an object in
an included pack is an ancestor of ones in excluded packs. But stopping
early is OK, since filling in the namehash fields of objects in the
to_pack list is only additive (i.e., having it helps the delta selection
process, but leaving it blank doesn't impact the correctness of the
resulting pack).
Even still, it is unlikely that this hurts us much in practice, since
the 'git repack --geometric' caller (which is introduced in a later
commit) marks small packs as included, and large ones as excluded.
During ordinary use, the small packs usually represent pushes after a
large repack, and so are unlikely to be ancestors of objects that
already exist in the repository.
(I found it convenient while developing this patch to have 'git
pack-objects' report the number of objects which were visited and got
their namehash fields filled in during traversal. This is also included
in the below patch via trace2 data lines).
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A future caller will want to be able to perform a reachability traversal
which terminates when visiting an object found in a kept pack. The
closest existing option is '--honor-pack-keep', but this isn't quite
what we want. Instead of halting the traversal midway through, a full
traversal is always performed, and the results are only trimmed
afterwords.
Besides needing to introduce a new flag (since culling results
post-facto can be different than halting the traversal as it's
happening), there is an additional wrinkle handling the distinction
in-core and on-disk kept packs. That is: what kinds of kept pack should
stop the traversal?
Introduce '--no-kept-objects[=<on-disk|in-core>]' to specify which kinds
of kept packs, if any, should stop a traversal. This can be useful for
callers that want to perform a reachability analysis, but want to leave
certain packs alone (for e.g., when doing a geometric repack that has
some "large" packs which are kept in-core that it wants to leave alone).
Note that this option is not guaranteed to produce exactly the set of
objects that aren't in kept packs, since it's possible the traversal
order may end up in a situation where a non-kept ancestor was "cut off"
by a kept object (at which point we would stop traversing). But, we
don't care about absolute correctness here, since this will eventually
be used as a purely additive guide in an upcoming new repack mode.
Explicitly avoid documenting this new flag, since it is only used
internally. In theory we could avoid even adding it rev-list, but being
able to spell this option out on the command-line makes some special
cases easier to test without promising to keep it behaving consistently
forever. Those tricky cases are exercised in t6114.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Future callers will want a function to fill a 'struct pack_entry' for a
given object id but _only_ from its position in any kept pack(s).
In particular, an new 'git repack' mode which ensures the resulting
packs form a geometric progress by object count will mark packs that it
does not want to repack as "kept in-core", and it will want to halt a
reachability traversal as soon as it visits an object in any of the kept
packs. But, it does not want to halt the traversal at non-kept, or
.keep packs.
The obvious alternative is 'find_pack_entry()', but this doesn't quite
suffice since it only returns the first pack it finds, which may or may
not be kept (and the mru cache makes it unpredictable which one you'll
get if there are options).
Short of that, you could walk over all packs looking for the object in
each one, but it scales with the number of packs, which may be
prohibitive.
Introduce 'find_kept_pack_entry()', a function which is like
'find_pack_entry()', but only fills in objects in the kept packs.
Handle packs which have .keep files, as well as in-core kept packs
separately, since certain callers will want to distinguish one from the
other. (Though on-disk and in-core kept packs share the adjective
"kept", it is best to think of the two sets as independent.)
There is a gotcha when looking up objects that are duplicated in kept
and non-kept packs, particularly when the MIDX stores the non-kept
version and the caller asked for kept objects only. This could be
resolved by teaching the MIDX to resolve duplicates by always favoring
the kept pack (if one exists), but this breaks an assumption in existing
MIDXs, and so it would require a format change.
The benefit to changing the MIDX in this way is marginal, so we instead
have a more thorough check here which is explained with a comment.
Callers will be added in subsequent patches.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message given when a configuration variable that is
expected to have a boolean value has been improved.
* ak/config-bad-bool-error:
config: improve error message for boolean config
"git reflog expire --stale-fix" can be used to repair the reflog by
removing entries that refer to objects that have been pruned away,
but was not careful to tolerate missing objects.
* js/reflog-expire-stale-fix:
reflog expire --stale-fix: be generous about missing objects
When certain features (e.g. grafts) used in the repository are
incompatible with the use of the commit-graph, we used to silently
turned commit-graph off; we now tell the user what we are doing.
* js/commit-graph-warning:
commit-graph: when incompatible with graphs, indicate why
Test to make sure "git rev-parse one-thing one-thing" gives
the same thing twice (when one-thing is --since=X).
* ew/rev-parse-since-test:
t1500: ensure current --since= behavior remains
Avoid individual tests in t5411 from getting affected by each other
by forcing them to use separate output files during the test.
* jx/t5411-unique-filenames:
t5411: refactor check of refs using test_cmp_refs
t5411: use different out file to prevent overwriting
Fix "git fsck --name-objects" which apparently has not been used by
anybody who is motivated enough to report breakage.
* js/fsck-name-objects-fix:
fsck --name-objects: be more careful parsing generation numbers
t1450: robustify `remove_object()`
The .mailmap is documented to be read only from the root level of a
working tree, but a stray file in a bare repository also was read
by accident, which has been corrected.
* jk/mailmap-only-at-root:
mailmap: only look for .mailmap in work tree
"git grep --untracked" is meant to be "let's ALSO find in these
files on the filesystem" when looking for matches in the working
tree files, and does not make any sense if the primary search is
done against the index, or the tree objects. The "--cached" and
"--untracked" options have been marked as mutually incompatible.
* mt/grep-cached-untracked:
grep: error out if --untracked is used with --cached
"git mergetool" feeds three versions (base, local and remote) of
a conflicted path unmodified. The command learned to optionally
prepare these files with unconflicted parts already resolved.
* sh/mergetool-hideresolved:
mergetool: add per-tool support and overrides for the hideResolved flag
mergetool: break setup_tool out into separate initialization function
mergetool: add hideResolved configuration
Even though invocations of "die()" were logged to the trace2
system, "BUG()"s were not, which has been corrected.
* jt/trace2-BUG:
usage: trace2 BUG() invocations
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
There are other ways than ".." for a single token to denote a
"commit range", namely "<rev>^!" and "<rev>^-<n>", but "git
range-diff" did not understand them.
* js/range-diff-wo-dotdot:
range-diff(docs): explain how to specify commit ranges
range-diff/format-patch: handle commit ranges other than A..B
range-diff/format-patch: refactor check for commit range
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
Piecemeal of rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--check-and-set-terms` subcommand
bisect--helper: reimplement `bisect_skip` shell function in C
bisect--helper: retire `--bisect-auto-next` subcommand
bisect--helper: use `res` instead of return in BISECT_RESET case option
bisect--helper: retire `--bisect-write` subcommand
bisect--helper: reimplement `bisect_replay` shell function in C
bisect--helper: reimplement `bisect_log` shell function in C
Fix incremental update of commit-graph file around corrected commit
date data.
* ds/commit-graph-genno-fix:
commit-graph: prepare commit graph
commit-graph: be extra careful about mixed generations
commit-graph: compute generations separately
commit-graph: validate layers for generation data
commit-graph: always parse before commit_graph_data_at()
commit-graph: use repo_parse_commit
The commit-graph learned to use corrected commit dates instead of
the generation number to help topological revision traversal.
* ak/corrected-commit-date:
doc: add corrected commit date info
commit-reach: use corrected commit dates in paint_down_to_common()
commit-graph: use generation v2 only if entire chain does
commit-graph: implement generation data chunk
commit-graph: implement corrected commit date
commit-graph: return 64-bit generation number
commit-graph: add a slab to store topological levels
t6600-test-reach: generalize *_three_modes
commit-graph: consolidate fill_commit_graph_info
revision: parse parent in indegree_walk_step()
commit-graph: fix regression when computing Bloom filters
When commands are started from a subdirectory, they may have to
compare the path to the subdirectory (called prefix and found out
from $(pwd)) with the tracked paths. On macOS, $(pwd) and
readdir() yield decomposed path, while the tracked paths are
usually normalized to the precomposed form, causing mismatch. This
has been fixed by taking the same approach used to normalize the
command line arguments.
* tb/precompose-prefix-too:
MacOS: precompose_argv_prefix()
The command line completion (in contrib/) completed "git branch -d"
with branch names, but "git branch -D" offered tagnames in addition,
which has been corrected. "git branch -M" had the same problem.
* jk/complete-branch-force-delete:
doc/git-branch: fix awkward wording for "-c"
completion: handle other variants of "branch -m"
completion: treat "branch -D" the same way as "branch -d"
Fix in passing custom args from "git clone" to "upload-pack" on the
other side.
* jv/upload-pack-filter-spec-quotefix:
t5544: clarify 'hook works with partial clone' test
upload-pack.c: fix filter spec quoting bug
Introduce an on-disk file to record revindex for packdata, which
traditionally was always created on the fly and only in-core.
* tb/pack-revindex-on-disk:
t5325: check both on-disk and in-memory reverse index
pack-revindex: ensure that on-disk reverse indexes are given precedence
t: support GIT_TEST_WRITE_REV_INDEX
t: prepare for GIT_TEST_WRITE_REV_INDEX
Documentation/config/pack.txt: advertise 'pack.writeReverseIndex'
builtin/pack-objects.c: respect 'pack.writeReverseIndex'
builtin/index-pack.c: write reverse indexes
builtin/index-pack.c: allow stripping arbitrary extensions
pack-write.c: prepare to write 'pack-*.rev' files
packfile: prepare for the existence of '*.rev' files
Various test updates.
* ab/tests-various-fixup:
rm tests: actually test for SIGPIPE in SIGPIPE test
archive tests: use a cheaper "zipinfo -h" invocation to get header
upload-pack tests: avoid a non-zero "grep" exit status
git-svn tests: rewrite brittle tests to use "--[no-]merges".
git svn mergeinfo tests: refactor "test -z" to use test_must_be_empty
git svn mergeinfo tests: modernize redirection & quoting style
cache-tree tests: explicitly test HEAD and index differences
cache-tree tests: use a sub-shell with less indirection
cache-tree tests: remove unused $2 parameter
cache-tree tests: refactor for modern test style
The "ort" merge strategy.
* en/merge-ort-perf:
merge-ort: begin performance work; instrument with trace2_region_* calls
merge-ort: ignore the directory rename split conflict for now
merge-ort: fix massive leak
ORT merge strategy learns to infer "renamed directory" while
merging.
* en/ort-directory-rename:
merge-ort: fix a directory rename detection bug
merge-ort: process_renames() now needs more defensiveness
merge-ort: implement apply_directory_rename_modifications()
merge-ort: add a new toplevel_dir field
merge-ort: implement handle_path_level_conflicts()
merge-ort: implement check_for_directory_rename()
merge-ort: implement apply_dir_rename() and check_dir_renamed()
merge-ort: implement compute_collisions()
merge-ort: modify collect_renames() for directory rename handling
merge-ort: implement handle_directory_level_conflicts()
merge-ort: implement compute_rename_counts()
merge-ort: copy get_renamed_dir_portion() from merge-recursive.c
merge-ort: add outline of get_provisional_directory_renames()
merge-ort: add outline for computing directory renames
merge-ort: collect which directories are removed in dirs_removed
merge-ort: initialize and free new directory rename data structures
merge-ort: add new data structures for directory rename detection
Currently invalid boolean config values return messages about 'bad
numeric', which is slightly misleading when the error was due to a
boolean value. We can improve the developer experience by returning a
boolean error message when we know the value is neither a bool text or
int.
before with an invalid boolean value of `non-boolean`, its unclear what
numeric is referring to:
fatal: bad numeric config value 'non-boolean' for 'commit.gpgsign': invalid unit
now the error message mentions `non-boolean` is a bad boolean value:
fatal: bad boolean config value 'non-boolean' for 'commit.gpgsign'
Signed-off-by: Andrew Klotz <agc.klotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `gc.writeCommitGraph = true`, it is possible that the commit-graph
is _still_ not written: replace objects, grafts and shallow repositories
are incompatible with the commit-graph feature.
Under such circumstances, we need to indicate to the user why the
commit-graph was not written instead of staying silent about it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever a user runs `git reflog expire --stale-fix`, the most likely
reason is that their repository is at least _somewhat_ corrupt. Which
means that it is more than just possible that some objects are missing.
If that is the case, that can currently let the command abort through
the phase where it tries to mark all reachable objects.
Instead of adding insult to injury, let's be gentle and continue as best
as we can in such a scenario, simply by ignoring the missing objects and
moving on.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version of Ubuntu Linux used by default at GitHub Actions CI
has been updated to one that lack coccinelle; until it gets fixed,
work it around by sticking to the previous release (18.04).
* tb/ci-run-cocci-with-18.04:
.github/workflows/main.yml: run static-analysis on bionic
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
Some pretty-format specifiers do not need the data in commit object
(e.g. "%H"), but we were over-eager to load and parse it, which has
been made even lazier.
* jk/pretty-lazy-load-commit:
pretty: lazy-load commit data when expanding user-format
Cleaning various codepaths up.
* ds/more-index-cleanups:
t1092: test interesting sparse-checkout scenarios
test-lib: test_region looks for trace2 regions
sparse-checkout: load sparse-checkout patterns
name-hash: use trace2 regions for init
repository: add repo reference to index_state
fsmonitor: de-duplicate BUG()s around dirty bits
cache-tree: extract subtree_pos()
cache-tree: simplify verify_cache() prototype
cache-tree: clean up cache_tree_update()
When "git rebase -i" processes "fixup" insn, there is no reason to
clean up the commit log message, but we did the usual stripspace
processing. This has been corrected.
* js/rebase-i-commit-cleanup-fix:
rebase -i: do leave commit message intact in fixup! chains
Code clean-up.
* jk/t0000-cleanups:
t0000: consistently use single quotes for outer tests
t0000: run cleaning test inside sub-test
t0000: run prereq tests inside sub-test
t0000: keep clean-up tests together
