kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity
637 Commits 2 Branches 0 Tags 1.5 GiB
30edba8351
Commit Graph

637 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
steve-450
3d23203a6b
Create README.md 2019-05-28 19:19:04 -07:00
jass-on
a564cd442a
Add files via upload 2019-05-27 11:35:12 -07:00
jass-on
274d815c57
Add files via upload 
Top handles, front rests and corner clips modified to accept 3mm or 1/8" panels
 2019-05-27 08:54:44 -07:00
jass-on
8a7a18827a
Create notes.txt 2019-05-27 08:52:56 -07:00
volcom8190
d1bbd4735b Create mosquito_sock_mold_assembly_drawing.pdf 2019-05-26 19:32:27 -04:00
volcom8190
633b9655bb update duet and skr mounts, add skr mini 
update duet and skr mounts, add skr mini
 2019-05-26 18:02:48 -04:00
volcom8190
103c52f0db add mosquito hotend sock to toolhead folder 
add mosquito hotend sock to toolhead folder
 2019-05-26 17:13:55 -04:00
volcom8190
641e53161a add 8bitporo 350 config 
add 8bitporo 350 config
 2019-05-26 16:07:49 -04:00
volcom8190
4bb1ec1338 added mzbot cube and 3 test prints 
if you can print these and they thread together/look good with no issues, you can print a voron
 2019-05-23 11:57:05 -04:00
volcom8190
5121635a68 remove nested version folder in STL directory 2019-05-23 07:50:58 -04:00
volcom8190
af537fbf6b update slic3r profiles 
update to latest profile, reduced options to actually tested
 2019-05-21 16:17:15 -04:00
volcom8190
9cce02d135 update folder name, add more controller brackets 
update folder name, add more controller brackets
 2019-05-18 10:31:17 -04:00
volcom8190
edcde84de3 2.1.2 Push = Mosquito Hotend Support 
Initial Release for Mosquito Support
 2019-05-18 10:13:24 -04:00
volcom8190
d9f069264a Merge branch 'master' of https://github.com/VoronDesign/Voron-2 2019-05-17 14:40:46 -04:00
Maglin
14624e7cf8 Adding X/Y Hall board back in 2019-05-16 18:17:29 -05:00
volcom8190
05c1a065a1 reorient tape chain attachment on x carriage, add count to 80t for z drive use only 
reorient tape chain attachment on x carriage, add count to 80t for z drive use only
 2019-05-16 16:23:09 -04:00
gsl12
e6c2c81758 WAGO 221 mounts 
Some variations of WAGO 221-413 and 221-415 mount.
 2019-05-13 08:43:29 +02:00
Maglin
50a526aa84 Adding stock per manual Klipper Config 2019-05-06 21:26:58 -05:00
volcom8190
b570d1a6ac extra clearance to cable cover for 20mm tape chain bridge 
extra clearance to cable cover for 20mm tape chain bridge
 2019-04-13 09:42:17 -04:00
John Jardine
390d25345c update readme for 2.1.1 release 2019-04-08 19:46:16 -04:00
volcom8190
55d7aba7a8 remove outdated electronics brackets 
brackets are part of 2.2, removing outdated stuff
 2019-04-08 19:09:22 -04:00
volcom8190
ca20d12619 remove mobius 2 folder 
remove mobius 2 folder
 2019-04-08 19:09:22 -04:00
volcom8190
70fe253421 rename folder 2.1.1 
rename folder to 2.1.1
 2019-04-08 19:09:22 -04:00
volcom8190
4f67e99e63 add remaining 2.1.1 parts 
add part cooling ducts and extended tape chain mounts
 2019-04-08 19:09:22 -04:00
volcom8190
44af4ff344 add 2.1.1 parts 
fix clearances in front idlers, add electronics brackets, add filtered power inlet, add new 80t
 2019-04-08 19:09:22 -04:00
Maglin
e8c795b20f
Merge pull request #3 from volcom8190/master 
Update Profiles, Remove Broken PanelDue Assembly Mod
 2019-03-15 17:14:13 -05:00
volcom8190
bd9e912931 Update Profiles, Remove Broken PanelDue Assembly Mod 
Panel Due never worked right, update slic3r settings
 2019-03-15 07:34:33 -04:00
Alec Plumb
63c2c678cf Fix file names 2019-02-02 17:27:30 -05:00
Alec Plumb
a0a52790b1 Remove old cam mount 2019-02-02 17:27:30 -05:00
Alec Plumb
9409e10565 Gantry mounts for Pi Zero W and wide angle camera module 2019-02-02 17:27:30 -05:00
John Jardine
42a8ce2ba8
Merge pull request #1 from alecplumb/merge_mods 
Merge mods
 2019-02-02 12:53:57 -05:00
Alec Plumb
42eb1ef86d Merge Voron-2 related mods from mzbot repo 2019-02-02 08:18:11 -08:00
Alec Plumb
0e71506756 Merge remote-tracking branch 'origin/master' into newmaster 2019-01-26 16:50:16 -08:00
Alec Plumb
e386b6af62 Remove Endstop PCB 2019-01-26 16:44:52 -08:00
fess" AKA John Fessenden
38ba99eb04 add image to ArmyAg's Logitech Camera Mount Mod (#186) 2019-01-26 07:47:33 -06:00
danowar
f2306e7947 added Danowar mods folder (#185) 2019-01-26 07:46:49 -06:00
Boffgithub
64bf31dfab Add files via upload (#184) 
* Add files via upload

* Update VORON2_stock_250_printer.cfg

added extra text at the top of the file and removed a couple of macros to keep it as simple and avoid any confusion for new users
 2019-01-26 07:45:15 -06:00
daveidmx
180a33b372 daveidmx config: FSR, leave heating on, move to Duet folder (#181) 
* Increase idle timeout to 24 hours, and set motors to turn off.

* Set electronics fan min PWM and blip time because my fans are sluggish.

* Extruder drive current adjustments based on PA trials to avoid skipping steps.

* Preheat scripts used the wrong fan control command. And fix some temps.

* Make toolhead heater selection sticky by writing out /sys/restore_tool_heater.g.

* Reduce default PLA print temp.

* Make firmware retraction profile selection sticky by writing out to /sys/restore_retraction.g.
Make separate profiles for V6 and Volcano.

* Filament sensors need to be _turned on_.

* Release notes.

* Pulling in comments from public branch.

* Adding named heatbreak thermistor.

* Increasing instantaneous drive parameters on XY

* Turn off extruder drive in print_end.g

* Tweaking mswitch_xy.g position.

* Missed configuration on the heatbreak thermistor.

* Changed origin coordinates to be at bed center.

* Deselect and re-select tool across pause. (Set to standby temp.)

* Set bed standby temps in preheat scripts.

* Add a script for calibrating the mswitch.

* Reduce instantaneous XY drive parameters.

* Increasing pressure advance values for Volcano.

* Full-speed chamber fan on print end.

* Adding another toolhead profile.

* Adding a coarse leveling script for when the gantry is too far out to be corrected by the default dive height.

* Move toolhead thermistor parameters to the heating/toolhead_* scripts, because they change when you swap toolheads.

* README.txt

* README.txt

* FSR Z endstop.

* Don't disable heaters during Z probing. Turns out it's actually not needed and the thermal delta actually messes up the readings.

* README.txt

* Moving daveidmx config from DuetWifi folder to Duet folder.
 2019-01-26 07:44:51 -06:00
Sparreau
db9de0bed7 Add Sparreau mods (#180) 
* Create Readme.md

* Rename Readme.md to ReadMe.md

* Rename ReadMe.md to README.md

* Add files via upload

* Add files via upload

* Add files via upload

* Add files via upload

* Add files via upload

* Add files via upload

* Delete _z_rail_stop_bottom_x4 (2).stl

* Delete _z_rail_stop_top_x4 v6.stl

* Add files via upload

* Update README.md

* Update README.md

* Update README.md

* Update README.md

* Update README.md
 2019-01-26 07:43:51 -06:00
Mario Goebbels
1b863c063b MKS Gen L v1.0 brackets (#178) 
* MKS Gen L v1.0 brackets

Both orientations. Original hole spacing 102x76mm, scaled to 100.25% to deal with ABS+ shrink (tested on version with long side to the extrusion.)

* Move STLs into their own directory.

* MKS GenL v1.0 brackets, STEP files.
 2019-01-26 07:39:42 -06:00
Maks Zolin
e4ecfa2c23 Revert " Adding missing motor covers, cleanup (#183)" 
This reverts commit 24c323d0988ad0e75a9b7b03d6dd1cf20c111311.
 2018-12-28 23:14:43 -08:00
Maks Zolin
24c323d098
Adding missing motor covers, cleanup (#183) 
* Cleanup for the V1.6 release

* Updating the readme

* Adding missing motor covers, cleanup
 2018-12-28 23:10:01 -08:00
Maks Zolin
91af2dedaa
Update README.md 2018-12-20 00:38:16 -08:00
Maks Zolin
81a4daf9b6 Fixing the README 2018-12-20 00:30:47 -08:00
Maks Zolin
20005120aa VORON1.6 2018-12-20 00:27:28 -08:00
Boffgithub
9d3459736b Update NP++ language file for Klipper configs (#179) 
* Create Killper_cfg_UDL_20181205.xml

Updated version DECEMBER 2018

Added Duet pins & some misc stuff I missed previously

* Rename Killper_cfg_UDL_20181205.xml to Klipper_cfg_UDL_20181205.xml

* Delete Klipper_cfg_UDL_20180824.xml

* Update Klipper_cfg_UDL_20181205.xml

Updated Notepad++ UDL file for Klipper config highlighting
DECEMBER 2018
 2018-12-05 10:36:35 -06:00
derdigge
f974f75ff9 I added a mount for the bltouch (#177) 
* added M12 probemount

* Update Readme.md

* added step

* Create Readme

* Add files via upload

* Update Readme

* Add files via upload

* Update Readme
 2018-12-05 10:35:23 -06:00
Jink0
fd2b356de4 Mods added under Mods/Jink (#176) 2018-12-05 10:34:49 -06:00
Tin Pecirep
d324ca846c Mods for LED bars and Einsy Rambo (#175) 
* Mods

* Fixed incorrect Link Syntax

* added Einsy config to main config folder

* documented inverted enable-pins

* added pictures
 2018-12-05 10:33:55 -06:00
Alec B. Plumb
f8c30bac06 Add kill_pin to [display] for reference (#174) 2018-12-05 10:32:03 -06:00