Contribution-focused fork of github:VoronDesign/Voron-2

Go to file

volcom8190 edcde84de3 2.1.2 Push = Mosquito Hotend Support Initial Release for Mosquito Support		2019-05-18 10:13:24 -04:00
Firmware	Adding stock per manual Klipper Config	2019-05-06 21:26:58 -05:00
Mods	remove outdated electronics brackets	2019-04-08 19:09:22 -04:00
PCB/XY Endstop	Adding X/Y Hall board back in	2019-05-16 18:17:29 -05:00
Slicer_Profiles	Update Profiles, Remove Broken PanelDue Assembly Mod	2019-03-15 07:34:33 -04:00
STLs/VORON2.1.1	2.1.2 Push = Mosquito Hotend Support	2019-05-18 10:13:24 -04:00
.gitignore	Adding BeltChain for V2	2017-12-07 14:17:40 -08:00
LICENSE.md	Updated license in MD format, also updated to v3	2016-05-03 13:13:31 -07:00
README.md	update readme for 2.1.1 release	2019-04-08 19:46:16 -04:00

README.md

Voron 2.1.1

The second official release of the Voron 2.1.1 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!