Merge pull request #30 from Moerup/ReadmeForMods
Added Readme / Index to Mods folder
This commit is contained in:
volcom8190
commit
0f9d9574ad
GPG Key ID:
4AEE18F83AFDEB23
323
Mods/README.md
Normal file
323
Mods/README.md
Normal file
@ -0,0 +1,323 @@
|
||||
# Mods
|
||||
|
||||
A neatly structured list of all the content in each folder
|
||||
Remember to update this README when uploading new mods!
|
||||
|
||||
## List structure
|
||||
|
||||
The list should be structured in the following way:
|
||||
|
||||
## "Creator of mods"
|
||||
|
||||
"Mods name"
|
||||
|
||||
- "Small desciption of the mod"
|
||||
|
||||
"Mod 2's name"
|
||||
|
||||
- "Small desciption of the mod"
|
||||
|
||||
---
|
||||
|
||||
## 3D_Black
|
||||
|
||||
[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/Mods/3D_Black)
|
||||
|
||||
- Different fan covers for 40mm fans.
|
||||
|
||||
## Andreq
|
||||
|
||||
[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Andreq/VORON2)
|
||||
|
||||
- Tool used for grinding flats on a shaft at specific places.
|
||||
|
||||
## ArmyAg08
|
||||
|
||||
[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Logitech_C270_Mounts)
|
||||
|
||||
- Different C270 camera mounts, attached to the extrusions.
|
||||
|
||||
[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Panels)
|
||||
|
||||
- Corner panel clip that fit 3mm or 1/8" panels with foam tape.
|
||||
|
||||
## Danowar
|
||||
|
||||
[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/F6_Board_Mount)
|
||||
|
||||
- Mounts for FYSETCS F6 controller boards.
|
||||
|
||||
[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
|
||||
|
||||
- Klipper config for a FYSETC F6 350 build.
|
||||
|
||||
[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Load_Cell_Spool_Holder)
|
||||
|
||||
- Spool holder with built in weight scale.
|
||||
|
||||
[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Tablet_Mount)
|
||||
|
||||
- Detachable mount for tablet using magnets.
|
||||
|
||||
## FHeilmann
|
||||
|
||||
[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2_5mm_Parts)
|
||||
|
||||
- Parts modified for extrusions with 5mm gap.
|
||||
|
||||
[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2.1_5mm_parts)
|
||||
|
||||
- Parts modified for extrusions with 5mm gap.
|
||||
|
||||
## Fulg
|
||||
|
||||
[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Fulg/VORON2/PanelDue5)
|
||||
|
||||
- Mount for the PanelDue5 LCD display.
|
||||
|
||||
## GSL12
|
||||
|
||||
[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount)
|
||||
|
||||
## Glowtape
|
||||
|
||||
[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Glowtape)
|
||||
|
||||
## GustavTheMighty
|
||||
|
||||
[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GustavtheMighty/4.3-Paneldue_Case)
|
||||
|
||||
- Case/mount for the 4.3 PanelDue LCD Display.
|
||||
|
||||
## Hackdoggo
|
||||
|
||||
[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Hackdoggo/V2/BMGobius)
|
||||
|
||||
- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
|
||||
|
||||
## Jass_on
|
||||
|
||||
[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on/Voron_2.1.1_Tempered_Glass)
|
||||
|
||||
- Panel clips and handles for using tempered glass side panels.
|
||||
|
||||
[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
|
||||
|
||||
[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
|
||||
|
||||
- SKR 1.3 mount with built in 40mm fan mount.
|
||||
|
||||
## JeJeff
|
||||
|
||||
[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
|
||||
|
||||
- Slot covers for extrusions with 5mm slot width.
|
||||
|
||||
[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Cable_Tie_Mount)
|
||||
|
||||
- Cable tie mounts for 4mm cable ties.
|
||||
|
||||
[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
|
||||
|
||||
- Main Plug Panel modified to hold a RJ45 ethernet socket.
|
||||
|
||||
## Jink
|
||||
|
||||
[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Coroplast_Mount)
|
||||
|
||||
- Mount / Bracket supporting the coroplast sheets.
|
||||
|
||||
[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount)
|
||||
|
||||
[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount)
|
||||
|
||||
- Mirrored RAMPS bracket.
|
||||
|
||||
[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Spool_Holder_With_Scale)
|
||||
|
||||
[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/WAGO_Mount)
|
||||
|
||||
- Mount for 3x WAGO connectors.
|
||||
|
||||
## JustinVoelker
|
||||
|
||||
[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JustinVoelker/VORON2)
|
||||
|
||||
- Mains plug panel with ethernet cutout.
|
||||
|
||||
## Koios
|
||||
|
||||
[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios/6mm_Glass)
|
||||
|
||||
- Front panel locks for 6mm tempered glass panels.
|
||||
|
||||
[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios)
|
||||
|
||||
- Mount for C920 secured to the top front extrusion.
|
||||
|
||||
[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios)
|
||||
|
||||
- Different mounts for LED light bars.
|
||||
|
||||
## Railgunner
|
||||
|
||||
[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2)
|
||||
|
||||
- Dual direct drive using 2x Bondtech BMG.
|
||||
|
||||
## Seamen
|
||||
|
||||
[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2)
|
||||
|
||||
- Mount for RAMPS board with the stepper extender.
|
||||
|
||||
## Sparreau
|
||||
|
||||
[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
- Bracket for mounting the FSR PCB.
|
||||
|
||||
[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
- Mount for attaching a dial indicator to the X Carriage.
|
||||
|
||||
[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
- Scalable mains plug panel with small modifications.
|
||||
|
||||
[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
|
||||
|
||||
- An extra tab added to the Z idler to prevent sagging / rotation.
|
||||
|
||||
## Stephan
|
||||
|
||||
[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/M12_probeholder)
|
||||
|
||||
- Drop in replacement of the stock probe to a M12.
|
||||
|
||||
[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/bltouch_mount)
|
||||
|
||||
- Drop in replacement of the stock probe to a BLTouch.
|
||||
|
||||
## Volcom8190
|
||||
|
||||
[Nozzle Scrubber](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Nozzle_Scrubber)
|
||||
|
||||
- Mount for brass brush with added waste bucket.
|
||||
|
||||
[Panels - Handles - Skirts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Panels)
|
||||
|
||||
- Different panels, skirts, handles and some mods for the filtered mains.
|
||||
|
||||
## daveidmx
|
||||
|
||||
[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/Mods/daveidmx/VORON2)
|
||||
|
||||
- 30mm fan adapter for the X carriage.
|
||||
|
||||
## etherwalker
|
||||
|
||||
[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/etherwalker/Pi_Zero_Camera_Mount)
|
||||
|
||||
## exquyre
|
||||
|
||||
[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/Anet_12864_display)
|
||||
|
||||
- Case for Anet 12864 LCD display.
|
||||
|
||||
[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/LED_bar_mount)
|
||||
|
||||
- Mount for 12V LED bars to the top extrusions.
|
||||
|
||||
[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/cable_cover)
|
||||
|
||||
- Room for 3-4 20AWG wires.
|
||||
|
||||
[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/einsy%2Bramps)
|
||||
|
||||
- Mounting bracket for 1 Einsy and 1 RAMPS.
|
||||
|
||||
## hiemmer
|
||||
|
||||
[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/hiemmer/Tool_Holders)
|
||||
|
||||
- Tool holder for calipers, screwdriver etc.
|
||||
|
||||
## nemgrea
|
||||
|
||||
[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/Mods/nemgrea/magnetic_split_front_door)
|
||||
|
||||
- Hinges, handles and magnet mounts for creating a split front door panel.
|
||||
|
||||
## pnokel
|
||||
|
||||
[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
|
||||
|
||||
- Small mount to secure wires with zip ties.
|
||||
|
||||
[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
|
||||
|
||||
- Different coroplast holders for added support.
|
||||
|
||||
[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
|
||||
|
||||
- 14.5mm toothed idler.
|
||||
|
||||
## steve450
|
||||
|
||||
[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/Mods/steve450/Voron2.1)
|
||||
|
||||
- Corner brackets preventing rotation of the extrusions, and stiffening the joints.
|
||||
Also covers the Z-belt hole for improved aesthetics.
|
||||
|
||||
## synfinatic
|
||||
|
||||
[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Duet-Fan-Mount)
|
||||
|
||||
- Duet/Duex fan mount with air vents directly above the steppers to increase airflow.
|
||||
|
||||
[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/E-Stop-Switch)
|
||||
|
||||
- Mount for emergency button attached to the top of the printer.
|
||||
|
||||
[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Filament-DryBox)
|
||||
|
||||
- Mount for filament drybox attached to the side of the printer.
|
||||
|
||||
[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/LED-Mount)
|
||||
|
||||
- Mount for LED lightbars.
|
||||
|
||||
[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/PS-Extra-Bracket)
|
||||
|
||||
- Extra bracket to keep the power supply in place.
|
||||
|
||||
[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/RJ45-Mount)
|
||||
|
||||
- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient.
|
||||
|
||||
## wile.e.coyote
|
||||
|
||||
[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Support for the coroplast to prevent sagging.
|
||||
|
||||
[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Mounting bracket for 2 buck converters.
|
||||
|
||||
[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Mount for brass brush. Used for cleaning nozzle before printing.
|
||||
|
||||
[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Different mounts for Wago connectors.
|
||||
|
||||
---
|
||||
Loading…
Reference in New Issue
Block a user