diff --git a/Mods/README.md b/Mods/README.md
new file mode 100644
index 0000000..8d4fa42
--- /dev/null
+++ b/Mods/README.md
@@ -0,0 +1,323 @@
+# Mods
+
+A neatly structured list of all the content in each folder  
+Remember to update this README when uploading new mods!
+
+## List structure
+
+The list should be structured in the following way:
+
+## "Creator of mods"  
+
+"Mods name"
+
+- "Small desciption of the mod"  
+  
+"Mod 2's name"
+
+- "Small desciption of the mod"  
+  
+---
+
+## 3D_Black
+
+[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/Mods/3D_Black)  
+
+- Different fan covers for 40mm fans.  
+  
+## Andreq
+
+[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Andreq/VORON2)
+
+- Tool used for grinding flats on a shaft at specific places.
+
+## ArmyAg08
+
+[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Logitech_C270_Mounts)
+
+- Different C270 camera mounts, attached to the extrusions.
+
+[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Panels)
+
+- Corner panel clip that fit 3mm or 1/8" panels with foam tape.
+
+## Danowar
+
+[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/F6_Board_Mount)
+
+- Mounts for FYSETCS F6 controller boards.
+
+[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
+
+- Klipper config for a FYSETC F6 350 build.
+
+[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Load_Cell_Spool_Holder)
+
+- Spool holder with built in weight scale.
+
+[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Tablet_Mount)
+
+- Detachable mount for tablet using magnets.
+
+## FHeilmann
+
+[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2_5mm_Parts)
+
+- Parts modified for extrusions with 5mm gap.
+
+[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2.1_5mm_parts)
+
+- Parts modified for extrusions with 5mm gap.
+
+## Fulg
+
+[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Fulg/VORON2/PanelDue5)
+
+- Mount for the PanelDue5 LCD display.
+
+## GSL12
+
+[WAGO 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount)  
+
+## Glowtape
+
+[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Glowtape)
+
+## GustavTheMighty
+
+[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GustavtheMighty/4.3-Paneldue_Case)
+
+- Case/mount for the 4.3 PanelDue LCD Display.
+
+## Hackdoggo
+
+[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Hackdoggo/V2/BMGobius)
+
+- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
+
+## Jass_on
+
+[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on/Voron_2.1.1_Tempered_Glass)
+
+- Panel clips and handles for using tempered glass side panels.
+
+[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
+
+[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
+
+- SKR 1.3 mount with built in 40mm fan mount.
+
+## JeJeff
+
+[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
+
+- Slot covers for extrusions with 5mm slot width.
+
+[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Cable_Tie_Mount)
+
+- Cable tie mounts for 4mm cable ties.
+
+[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
+
+- Main Plug Panel modified to hold a RJ45 ethernet socket.
+
+## Jink
+
+[Coroplast mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Coroplast_Mount)
+
+- Mount / Bracket supporting the coroplast sheets.
+
+[Filament runout sensor mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Filament_Runout_Sensor_Mount)
+
+[Left handed RAMPS mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Left_Handed_Ramps_Mount)
+
+- Mirrored RAMPS bracket.
+
+[Spool holder with scale](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/Spool_Holder_With_Scale)
+
+[WAGO Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jink/VORON_2.1/WAGO_Mount)
+
+- Mount for 3x WAGO connectors.
+
+## JustinVoelker
+
+[Mains Plug Panel with RJ45](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JustinVoelker/VORON2)
+
+- Mains plug panel with ethernet cutout.
+
+## Koios
+
+[Front Panel Locks](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios/6mm_Glass)
+
+- Front panel locks for 6mm tempered glass panels.
+
+[Logitech C920 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios)
+
+- Mount for C920 secured to the top front extrusion.
+
+[LED Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Koios)
+
+- Different mounts for LED light bars.
+
+## Railgunner
+
+[Dual Direct Drive X Carriage](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2)
+
+- Dual direct drive using 2x Bondtech BMG. 
+
+## Seamen
+
+[RAMPS Extender Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Railgunner/10mmBMGx2)
+
+- Mount for RAMPS board with the stepper extender.
+
+## Sparreau
+
+[5V Power Supply Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+[FSR Circuit Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+- Bracket for mounting the FSR PCB.
+
+[Z Rail Stop](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+[Bed Extrusion Spacer](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+[Dial Indicator Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+- Mount for attaching a dial indicator to the X Carriage.
+
+[Mains Plug Panel Parametric](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+- Scalable mains plug panel with small modifications.
+
+[Z Idler Frame Extra Tab](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Sparreau)
+
+- An extra tab added to the Z idler to prevent sagging / rotation.
+
+## Stephan
+
+[M12 Probeholder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/M12_probeholder)
+
+- Drop in replacement of the stock probe to a M12.
+
+[BlTouch Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Stephan/bltouch_mount)
+
+- Drop in replacement of the stock probe to a BLTouch.
+
+## Volcom8190
+
+[Nozzle Scrubber](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Nozzle_Scrubber)
+
+- Mount for brass brush with added waste bucket.
+
+[Panels - Handles - Skirts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Volcom8190/V2_and_V2.1/Panels)
+
+- Different panels, skirts, handles and some mods for the filtered mains.
+
+## daveidmx
+
+[30mm Fan Adapter](https://github.com/VoronDesign/Voron-2/tree/master/Mods/daveidmx/VORON2)
+
+- 30mm fan adapter for the X carriage.
+
+## etherwalker
+
+[Pi Zero Camera Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/etherwalker/Pi_Zero_Camera_Mount)
+
+## exquyre
+
+[Anet 12864 Display](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/Anet_12864_display)
+
+- Case for Anet 12864 LCD display.
+
+[LED Bar Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/LED_bar_mount)
+
+- Mount for 12V LED bars to the top extrusions.
+
+[Cable Cover Insert](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/cable_cover)
+
+- Room for 3-4 20AWG wires.
+
+[Einsy + RAMPS Combo](https://github.com/VoronDesign/Voron-2/tree/master/Mods/exquyre/einsy%2Bramps)
+
+- Mounting bracket for 1 Einsy and 1 RAMPS.
+
+## hiemmer
+
+[Tool Holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/hiemmer/Tool_Holders)
+
+- Tool holder for calipers, screwdriver etc.
+
+## nemgrea
+
+[Magnetic Split Front Door](https://github.com/VoronDesign/Voron-2/tree/master/Mods/nemgrea/magnetic_split_front_door)
+
+- Hinges, handles and magnet mounts for creating a split front door panel.
+
+## pnokel
+
+[Cable Zipper](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
+
+- Small mount to secure wires with zip ties.
+
+[Coroplast holders](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
+
+- Different coroplast holders for added support.
+
+[Toothed Idler](https://github.com/VoronDesign/Voron-2/tree/master/Mods/pnokel)
+
+- 14.5mm toothed idler.
+
+## steve450
+
+[Corner Brackets](https://github.com/VoronDesign/Voron-2/tree/master/Mods/steve450/Voron2.1)
+
+- Corner brackets preventing rotation of the extrusions, and stiffening the joints.  
+Also covers the Z-belt hole for improved aesthetics.
+
+## synfinatic
+
+[Duet Fan Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Duet-Fan-Mount)
+
+- Duet/Duex fan mount with air vents directly above the steppers to increase airflow.
+
+[E-Stop Switch](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/E-Stop-Switch)
+
+- Mount for emergency button attached to the top of the printer.
+
+[Filament DryBox](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/Filament-DryBox)
+
+- Mount for filament drybox attached to the side of the printer.
+
+[LED Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/LED-Mount)
+
+- Mount for LED lightbars.
+
+[PS Extra Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/PS-Extra-Bracket)
+
+- Extra bracket to keep the power supply in place.
+
+[RJ45 Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/synfinatic/RJ45-Mount)
+
+- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient. 
+
+## wile.e.coyote  
+
+[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
+
+- Support for the coroplast to prevent sagging.
+
+[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
+
+- Mounting bracket for 2 buck converters.  
+
+[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
+
+- Mount for brass brush. Used for cleaning nozzle before printing.  
+
+[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
+
+- Different mounts for Wago connectors.  
+
+---