Birger Koblitz f285e8634c ramips: add support for Edimax RG21S ... SoC: MediaTek MT7621AT dual-core @ 880MHz RAM: 256M (Nanya NT5CC128M) FLASH: 16MB (Macronix MX25L12835F) WiFi: - 2.4GHz MediaTek MT7615N bgn - 5GHz MediaTek MT7615N nac Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN) USB: No BTN: Reset, WPS LED: 4 red LEDs, indistinguishable when casing closed UART: UART is present as Pads marked J1 on the PCB. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the OEM web-interface (by default:http://192.168.1.1) The sysupgrade image can be installed via TFTP from the U-Boot bootloader. Connect ethernet port 2. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [flash node rename, EDIMAX -> Edimax, complete device model name] Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-09-20 11:36:27 +02:00
..
base-files	ramips: add support for Edimax RG21S	2019-09-20 11:36:27 +02:00
dts	ramips: add support for Edimax RG21S	2019-09-20 11:36:27 +02:00
files-4.14/drivers	ramips: add MT7530 switch port-mirroring support	2019-08-18 22:08:42 +08:00
image	ramips: add support for Edimax RG21S	2019-09-20 11:36:27 +02:00
mt76x8	ramips: add support for ipTIME A604M	2019-08-17 23:52:34 +08:00
mt7620	ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB	2019-07-08 22:00:24 +02:00
mt7621	Revert faulty tree push	2019-08-12 12:27:06 +02:00
patches-4.14	ramips: disable badblock shifting for MT7621 NAND	2019-08-31 10:31:00 +02:00
rt288x	ramips: disable CONFIG_MTD_SPLIT_FIRMWARE	2019-01-26 21:46:33 +01:00
rt305x	ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB	2019-07-08 22:00:24 +02:00
rt3883	ramips: use upstream RAW_APPENDED_DTB instead of our OWRTDTB	2019-07-08 22:00:24 +02:00
Makefile
modules.mk	kernel: Fix kmod-regmap split	2019-01-27 11:07:14 +01:00