Birger Koblitz f285e8634c ramips: add support for Edimax RG21S ... SoC: MediaTek MT7621AT dual-core @ 880MHz RAM: 256M (Nanya NT5CC128M) FLASH: 16MB (Macronix MX25L12835F) WiFi: - 2.4GHz MediaTek MT7615N bgn - 5GHz MediaTek MT7615N nac Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN) USB: No BTN: Reset, WPS LED: 4 red LEDs, indistinguishable when casing closed UART: UART is present as Pads marked J1 on the PCB. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation ------------ Update the factory image via the OEM web-interface (by default:http://192.168.1.1) The sysupgrade image can be installed via TFTP from the U-Boot bootloader. Connect ethernet port 2. Signed-off-by: Birger Koblitz <mail@birger-koblitz.de> [flash node rename, EDIMAX -> Edimax, complete device model name] Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-09-20 11:36:27 +02:00
..
apm821xx	apm821xx: image: remove unused kernel.dtb from IMAGES	2019-09-15 15:00:39 +00:00
ar7
ar71xx	ar71xx: fix typo in platform_do_upgrade_compex()	2019-09-16 07:00:22 +02:00
arc770
archs38
armvirt
at91
ath25	treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup	2019-09-11 09:05:35 +02:00
ath79	ath79: add SUPPORTED_DEVICES to ubnt_nanostation-m-xw	2019-09-19 23:43:27 +02:00
bcm53xx	bcm53xx: sysupgrade: support Luxul firmware format	2019-09-16 16:01:42 +02:00
brcm47xx	brcm47xx: sysupgrade: support Luxul firmware format	2019-09-16 21:37:33 +02:00
brcm63xx	brcm63xx: remove redundant variable definition in Makefile	2019-09-14 11:43:19 +02:00
brcm2708	brcm2708: fix Hifiberry DAC+DSP package definition	2019-09-20 07:50:47 +02:00
cns3xxx
gemini	kernel: bump 4.19 to 4.19.71	2019-09-11 09:47:49 +02:00
generic	kernel: Correctly search for the FIT image in mtd partition.	2019-09-19 23:43:27 +02:00
imx6	imx6: install-dtb as separate IMAGE	2019-09-15 15:00:17 +00:00
ipq40xx	treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup	2019-09-11 09:05:35 +02:00
ipq806x	ipq806x: provide label MAC address	2019-09-19 23:43:27 +02:00
ixp4xx	treewide: sysupgrade: use $UPGRADE_BACKUP to check for backup	2019-09-11 09:05:35 +02:00
kirkwood
lantiq	lantiq-dsl: fix value of FECS counter	2019-09-19 23:43:27 +02:00
layerscape	kernel: bump 4.14 to 4.14.142	2019-09-11 09:47:49 +02:00
malta
mediatek	mediatek: enable mtk_efuse by default	2019-09-15 22:56:09 +02:00
mpc85xx	mpc85xx: provide label MAC address	2019-09-19 23:43:27 +02:00
mvebu
mxs
octeon
octeontx
omap
orion
oxnas
pistachio
ramips	ramips: add support for Edimax RG21S	2019-09-20 11:36:27 +02:00
rb532
samsung	samsung: split up DEVICE_TITLE	2019-09-11 15:17:09 +02:00
sunxi
tegra
uml
x86
zynq
Makefile