refresh_index() doesn't update SKIP_WORKTREE entries, but it still
matches them against the given pathspecs, marks the matches on the
seen[] array, check if unmerged, etc. In the following patch, one caller
will need refresh_index() to ignore SKIP_WORKTREE entries entirely, so
add a flag that implements this behavior.
While we are here, also realign the REFRESH_* flags and convert the hex
values to the more natural bit shift format, which makes it easier to
spot holes.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new enum parameter to `add_pathspec_matches_against_index()` and
`find_pathspecs_matching_against_index()`, allowing callers to specify
whether these function should attempt to match SKIP_WORKTREE entries or
not. This will be used in a future patch to make `git add` display a
warning when it is asked to update SKIP_WORKTREE entries.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a couple tests for `add` with SKIP_WORKTREE entries in
t7012, but these only cover the most basic scenarios. As we will be
changing how `add` deals with sparse paths in the subsequent commits,
let's move these two tests to their own file and add more test cases
for different `add` options and situations. This also demonstrates two
options that don't currently respect SKIP_WORKTREE entries: `--chmod`
and `--renormalize`.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `git add --refresh <pathspec>` doesn't find any matches for the
given pathspec, it prints an error message using the `match` field of
the `struct pathspec_item`. However, this field doesn't contain the
magic part of the pathspec. Instead, let's use the `original` field.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Disable the recent mergetool's hideresolved feature by default for
backward compatibility and safety.
* jn/mergetool-hideresolved-is-optional:
doc: describe mergetool configuration in git-mergetool(1)
mergetool: do not enable hideResolved by default
In particular, this describes mergetool.hideResolved, which can help
users discover this setting (either because it may be useful to them
or in order to understand mergetool's behavior if they have forgotten
setting it in the past).
Tested by running
make -C Documentation git-mergetool.1
man Documentation/git-mergetool.1
and reading through the page.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 98ea309b3f (mergetool: add hideResolved configuration,
2021-02-09) introduced the mergetool.hideResolved setting to reduce
the clutter in viewing non-conflicted sections of files in a
mergetool, it enabled it by default, explaining:
No adverse effects were noted in a small survey of popular mergetools[1]
so this behavior defaults to `true`.
In practice, alas, adverse effects do appear. A few issues:
1. No indication is shown in the UI that the base, local, and remote
versions shown have been modified by additional resolution. This
is inherent in the design: the idea of mergetool.hideResolved is to
convince a mergetool that expects pristine local, base, and remote
files to show partially resolved verisons of those files instead;
there is no additional source of information accessible to the
mergetool to see where the resolution has happened.
(By contrast, a mergetool generating the partial resolution from
conflict markers for itself would be able to hilight the resolved
sections with a different color.)
A user accustomed to seeing the files without partial resolution
gets no indication that this behavior has changed when they upgrade
Git.
2. If the computed merge did not line up the files correctly (for
example due to repeated sections in the file), the partially
resolved files can be misleading and do not have enough information
to reconstruct what happened and compute the correct merge result.
3. Resolving a conflict can involve information beyond the textual
conflict. For example, if the local and remote versions added
overlapping functionality in different ways, seeing the full
unresolved versions of each alongside the base gives information
about each side's intent that makes it possible to come up with a
resolution that combines those two intents. By contrast, when
starting with partially resolved versions of those files, one can
produce a subtly wrong resolution that includes redundant extra
code added by one side that is not needed in the approach taken
on the other.
All that said, a user wanting to focus on textual conflicts with
reduced clutter can still benefit from mergetool.hideResolved=true as
a way to deemphasize sections of the code that resolve cleanly without
requiring any changes to the invoked mergetool. The caveats described
above are reduced when the user has explicitly turned this on, because
then the user is aware of them.
Flip the default to 'false'.
Reported-by: Dana Dahlstrom <dahlstrom@google.com>
Helped-by: Seth House <seth@eseth.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to fsck objects received across multiple packs during a
single git fetch session has been broken when the packfile URI
feature was in use. A workaround has been added by disabling the
codepath to avoid keeping a packfile that is too small.
* jt/transfer-fsck-across-packs-fix:
fetch-pack: do not mix --pack_header and packfile uri
When fetching (as opposed to cloning) from a repository with packfile
URIs enabled, an error like this may occur:
fatal: pack has bad object at offset 12: unknown object type 5
fatal: finish_http_pack_request gave result -1
fatal: fetch-pack: expected keep then TAB at start of http-fetch output
This bug was introduced in b664e9ffa1 ("fetch-pack: with packfile URIs,
use index-pack arg", 2021-02-22), when the index-pack args used when
processing the inline packfile of a fetch response and when processing
packfile URIs were unified.
This bug happens because fetch, by default, partially reads (and
consumes) the header of the inline packfile to determine if it should
store the downloaded objects as a packfile or loose objects, and thus
passes --pack_header=<...> to index-pack to inform it that some bytes
are missing. However, when it subsequently fetches the additional
packfiles linked by URIs, it reuses the same index-pack arguments, thus
wrongly passing --index-pack-arg=--pack_header=<...> when no bytes are
missing.
This does not happen when cloning because "git clone" always passes
do_keep, which instructs the fetch mechanism to always retain the
packfile, eliminating the need to read the header.
There are a few ways to fix this, including filtering out pack_header
arguments when downloading the additional packfiles, but I decided to
stick to always using index-pack throughout when packfile URIs are
present - thus, Git no longer needs to read the bytes, and no longer
needs --pack_header here.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some early changes in the 2.31 cycle to optimize some setup
in diffcore-rename.c[1], some later changes to measure performance[2],
and finally some significant changes to improve rename detection
performance. The final one was merged with the note
Performance optimization work on the rename detection continues.
That works for the commit log, but feels misleading as a release note
since all the changes were within one cycle. Simplify this to just
Performance improvements for rename detection.
The former wording could be seen as hinting that more performance
improvements will come in 2.32, which is true, but we can just cover
those in the 2.32 release notes when the time comes.
[1] a5ac31b5b1 (Merge branch 'en/diffcore-rename', 2021-01-25)
[2] d3a035b055 (Merge branch 'en/merge-ort-perf', 2021-02-11)
[3] 12bd17521c (Merge branch 'en/diffcore-rename', 2021-03-01)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
* 'master' of github.com:git/git: (63 commits)
Git 2.31-rc1
Hopefully the last batch before -rc1
Revert "commit-graph: when incompatible with graphs, indicate why"
read-cache: make the index write buffer size 128K
dir: fix malloc of root untracked_cache_dir
commit-graph.c: display correct number of chunks when writing
doc/reftable: document how to handle windows
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
...
This commit causes breakage on macOS, or in fact any platform using
older versions of Tcl. Revert it.
* py/revert-commit-comments:
Revert "git-gui: remove lines starting with the comment character"
This reverts commit b9a43869c9.
This commit causes breakage on macOS (10.13). It causes errors on
startup and completely breaks the commit functionality. There are two
main problems. First, it uses `string cat` which is not supported on
older Tcl versions. Second, it does a half close of the bidirectional
pipe to git-stripspace which is also not supported on older Tcl
versions.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Raise the buffer size used when writing the index file out from
(obviously too small) 8kB to (clearly sufficiently large) 128kB.
* ns/raise-write-index-buffer-size:
read-cache: make the index write buffer size 128K
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
Matheus Tavares
Junio C Hamano
Jiang Xin
Jonathan Nieder
Matthias Rüster
Daniel Santos
Tran Ngoc Quan
Christopher Diaz Riveros
Bagas Sanjaya
Jonathan Tan
Yi-Jyun Pan
Alexander Shopov
Elijah Newren
Jean-Noël Avila
Emir Sarı
Peter Krefting
Pratyush Yadav