When importing from multiple perforce paths - we may attempt to
import a changelist that contains files from two (or more) of these
depot paths. Currently, this results in multiple git commits - one
containing the changes, and the other(s) as empty commit(s). This
behavior was introduced in commit 1f90a64891 ("git-p4: reduce number
of server queries for fetches", 2015-12-19).
Reproduction Steps:
1. Have a git repo cloned from a perforce repo using multiple
depot paths (e.g. //depot/foo and //depot/bar).
2. Submit a single change to the perforce repo that makes changes
in both //depot/foo and //depot/bar.
3. Run "git p4 sync" to sync the change from #2.
Change is synced as multiple commits, one for each depot path that
was affected.
Using a set, instead of a list inside p4ChangesForPaths() ensures
that each changelist is unique to the returned list, and therefore
only a single commit is generated for each changelist.
Reported-by: James Farwell <jfarwell@vmware.com>
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting to P4, if git-p4 came across a symlinked
directory, then during the generation of the submit diff, it would
try to open it as a normal file and fail.
Spot symlinks (of any type) and output a description of the symlink
instead.
Add a test case.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0021.15 creates files, adds them to the index, and commits them. All
this usually happens in a test run within the same second and Git cannot
know if the files have been changed between `add` and `commit`. Thus,
Git has to run the clean filter in both operations. Sometimes these
invocations spread over two different seconds and Git can infer that the
files were not changed between `add` and `commit` based on their
modification timestamp. The test would fail as it expects the filter
invocation. Remove this expectation to make the test stable.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can run "git index-pack path/to/foo.pack" outside of a
repository to generate an index file, or just to verify the
contents. There's no point in doing a collision check, since
we obviously do not have any objects to collide with.
The current code will blindly look in .git/objects based on
the result of setup_git_env(). That effectively gives us the
right answer (since we won't find any objects), but it's a
waste of time, and it conflicts with our desire to
eventually get rid of the "fallback to .git" behavior of
setup_git_env().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
normalize_path_copy() is not prepared to keep the double-slash of a
//server/share/dir kind of path, but treats it like a regular POSIX
style path and transforms it to /server/share/dir.
The bug manifests when 'git push //server/share/dir master' is run,
because tmp_objdir_add_as_alternate() uses the path in normalized
form when it registers the quarantine object database via
link_alt_odb_entries(). Needless to say that the directory cannot be
accessed using the wrongly normalized path.
Fix it by skipping all of the root part, not just a potential drive
prefix. offset_1st_component takes care of this, see the
implementation in compat/mingw.c::mingw_offset_1st_component().
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many tests want to run a command outside of any git repo;
with the nongit() function this is now a one-liner. It saves
a few lines, but more importantly, it's immediately obvious
what the code is trying to accomplish.
This doesn't convert every such case in the test suite; it
just covers those that want to do a one-off command. Other
cases, such as the ones in t4035, are part of a larger
scheme of outside-repo files, and it's less confusing for
them to stay consistent with the surrounding tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-pack builtin is marked as RUN_SETUP_GENTLY,
because it's perfectly fine to index a pack in the
filesystem outside of any repository. However, --stdin mode
will write the result to the object database, which does not
make sense outside of a repository. Doing so creates a bogus
".git" directory with nothing in it except the newly-created
pack and its index.
Instead, let's flag this as an error and abort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function abstracts the idea of running a command
outside of any repository (which is slightly awkward to do
because even if you make a non-repo directory, git may keep
walking up outside of the trash directory). There are
several scripts that use the same technique, so let's make
the function available for everyone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The general status and future of gmane is unclear at this
point, but certainly it does not seem to be carrying
gmane.comp.version-control.git at all anymore. Let's point
to public-inbox.org, which seems to be the favored archive
on the list these days (and which uses message-ids in its
URLs, making the links somewhat future-proof).
Reported-by: Chiel ten Brinke <ctenbrinke@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 39784cd3620cc47415c9010ec58a9616f040125c.
The function had only one caller when the "remove useless" was
written, but another topic will soon make heavy use of it and more
importantly the function will return different paths depending on
the value in opts.
Programs may use usage_msg_opt() to print a brief message
followed by the program usage, and then exit. The message
isn't prefixed at all, though, so it doesn't match our usual
error output and is easy to overlook:
$ git clone 1 2 3
Too many arguments.
usage: git clone [<options>] [--] <repo> [<dir>]
-v, --verbose be more verbose
-q, --quiet be more quiet
--progress force progress reporting
-n, --no-checkout don't create a checkout
--bare create a bare repository
[...and so on for another 31 lines...]
It looks especially bad when the message starts with an
option, like:
$ git replace -e
-e needs exactly one argument
usage: git replace [-f] <object> <replacement>
or: git replace [-f] --edit <object>
[...etc...]
Let's put our usual "fatal:" prefix in front of it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rerunning update-unicode.sh that we fixed in the previous commits
produces these new tables.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The uniset upstream has accepted my patches that eliminate the Unicode
plane offsets from the output in '--32' mode.
Remove the corresponding filter in update_unicode.sh.
This also fixes the issue that the plane offsets were not removed from
the second uniset call.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking just for the unicode data files' existence is not sufficient;
we should also download them if a newer version exists on the Unicode
consortium's servers. Option -N of wget does this nicely for us.
Reviewed-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The uniset upstream has added more commits that for example change the
hexadecimal output in '--32' mode to decimal. Let's pin the repo to a
commit that still outputs the width tables in the format we want.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the move into contrib/update-unicode, we no longer create the
unicode directory to have a clean working folder. Instead, the directory
of the script is used. This means that the subshell can be removed.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As it's used only by a tiny minority of the Git developer population,
this script does not belong into the main Git source directory.
Move it into contrib/ and adjust the paths to account for the new
location.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To perform the test case on Windows in a way that corresponds to the
POSIX version, inject the semicolon in a directory name.
Typically, an absolute POSIX style path, such as the one in $PWD, is
translated into a Windows style path by bash when it invokes git.exe.
However, the presence of the semicolon suppresses this translation;
but the untranslated POSIX style path is useless for git.exe.
Therefore, instead of $PWD pass the Windows style path that $(pwd)
produces.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the space between redirection and file name.
Also remove unnecessary invocations of subshells, such as
(cd submod &&
echo X >untracked
) &&
as there is no point of having the shell for functional purposes.
In case of a single Git command use the `-C` option to let Git cd into
the directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) regressed pushes to
repositories with colon (or semi-colon in Windows in them)
because it adds the repository's main object directory to
GIT_ALTERNATE_OBJECT_DIRECTORIES. The receiver interprets
the colon as a delimiter, not as part of the path, and
index-pack is unable to find objects which it needs to
resolve deltas.
The previous commit introduced a quoting mechanism for the
alternates list; let's use it here to cover this case. We'll
avoid quoting when we can, though. This alternate setup is
also used when calling hooks, so it's possible that the user
may call older git implementations which don't understand
the quoting mechanism. By quoting only when necessary, this
setup will continue to work unless the user _also_ has a
repository whose path contains the delimiter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read lists of alternates from objects/info/alternates
files (delimited by newline), as well as from the
GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable
(delimited by colon or semi-colon, depending on the
platform).
There's no mechanism for quoting the delimiters, so it's
impossible to specify an alternate path that contains a
colon in the environment, or one that contains a newline in
a file. We've lived with that restriction for ages because
both alternates and filenames with colons are relatively
rare, and it's only a problem when the two meet. But since
722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03), which builds on the
alternates system, every push causes the receiver to set
GIT_ALTERNATE_OBJECT_DIRECTORIES internally.
It would be convenient to have some way to quote the
delimiter so that we can represent arbitrary paths.
The simplest thing would be an escape character before a
quoted delimiter (e.g., "\:" as a literal colon). But that
creates a backwards compatibility problem: any path which
uses that escape character is now broken, and we've just
shifted the problem. We could choose an unlikely escape
character (e.g., something from the non-printable ASCII
range), but that's awkward to use.
Instead, let's treat names as unquoted unless they begin
with a double-quote, in which case they are interpreted via
our usual C-stylke quoting rules. This also breaks
backwards-compatibility, but in a smaller way: it only
matters if your file has a double-quote as the very _first_
character in the path (whereas an escape character is a
problem anywhere in the path). It's also consistent with
many other parts of git, which accept either a bare pathname
or a double-quoted one, and the sender can choose to quote
or not as required.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Last time I checked, I was living in the UTC+01:00 time zone. UTC+02:00
would be Central European _Summer_ Time.
Signed-off-by: Luis Ressel <aranea@aixah.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xxdiff was using a mix of "Ctrl-<key>" and "Ctrl+<key>" hotkeys.
The dashed "-" form is not accepted by newer xxdiff versions.
Use the plus "+" form only.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Always call the list of files @files.
Always call the worktree $worktree.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make difftool chdir to the top-level of the repository as soon as it can
so that we can simplify how paths are handled. Replace construction of
absolute paths via string concatenation with relative paths wherever
possible. The bulk of the code no longer needs to use absolute paths.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The double-slash fixup on the $workdir variable was being
performed just-in-time to avoid double-slashes in symlink
targets, but the rest of the code was silently using paths with
embedded "//" in them.
A recent user-reported error message contained double-slashes.
Eliminate the issue by sanitizing inputs as soon as they arrive.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ec26e7977 (difftool: fix argument handling in subdirs, 2016-07-18)
corrected how path arguments are handled in a subdirectory, but
it introduced a regression in how entries outside of the
subdirectory are handled by dir-diff.
When preparing the right-side of the diff we only include the
changed paths in the temporary area.
The left side of the diff is constructed from a temporary
index that is built from the same set of changed files, but it
was being constructed from within the subdirectory. This is a
problem because the indexed paths are toplevel-relative, and
thus they were not getting added to the index.
Teach difftool to chdir to the toplevel of the repository before
preparing its temporary indexes. This ensures that all of the
toplevel-relative paths are valid.
Add test cases to more thoroughly exercise this scenario.
Reported-by: Frank Becker <fb@mooflu.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When Git's source code calls isatty(), it really asks whether the
respective file descriptor is connected to an interactive terminal.
Windows' _isatty() function, however, determines whether the file
descriptor is associated with a character device. And NUL, Windows'
equivalent of /dev/null, is a character device.
Which means that for years, Git mistakenly detected an associated
interactive terminal when being run through the test suite, which
almost always redirects stdin, stdout and stderr to /dev/null.
This bug only became obvious, and painfully so, when the new
bisect--helper entered the `pu` branch and made the automatic build & test
time out because t6030 was waiting for an answer.
For details, see
https://msdn.microsoft.com/en-us/library/f4s0ddew.aspx
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What was intended was perhaps "... plumbing does for you" ("you" added), but
simply omitting the word "for" is more terse and gets the intended point across
just as well, if not more so.
I originally went with the approach of writing "for you", but Junio C
Hamano suggested this approach instead.
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By adding the word "just", which might have been accidentally omitted.
Adding the word "just" makes it clear that the point is to *not* do an
octopus merge simply because you *can* do it. In other words, you
should have a reason for doing it beyond simply having two (seemingly)
independent commits that you need to merge into another branch, since
it's not always the best approach.
The previous sentence made it look more like it was trying to say that
you shouldn't do an octopus merge *because* you can do an octopus merge.
Although this interpretation doesn't make sense and the rest of the
paragraph makes the intended meaning clear, this adjustment should make
the intent of the sentence more immediately clear to the reader.
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using the command 'git clone' as a verb, use "run" as the
verb indicating the action of executing the command 'git clone'.
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add definite and indefinite articles in three places where they were
missing.
- Use "the" in front of a directory name
- Use "the" in front of "style of cooperation"
- Use an indefinite article in front of "CVS background"
Signed-off-by: Kristoffer Haugsbakk <kristoffer.haugsbakk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is used only once, for the removal of the
directory. It is not used for the creation of the directory nor
anywhere else.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to "git am --abort", a sequencer abort did not check
whether the current HEAD is the one that is expected. This can lead
to loss of work (when not spotted and resolved using reflog before
the garbage collector chimes in).
This behavior is now changed by mimicking "git am --abort". The
abortion is done but HEAD is not changed when the current HEAD is
not the expected HEAD.
A new file "sequencer/abort-safety" is added to save the expected
HEAD.
The new behavior is only active when --abort is invoked on multiple
picks. The problem does not occur for the single-pick case because
it is handled differently.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behavior is now documented; more importantly, rewarding the user
with a "Wow, you are clever" praise afterwards is not an effective
way to advertise the feature--at that point the user already knows.
Signed-off-by: Andreas Krey <a.krey@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different places where the --no-abbrev option is parsed,
and two different places where SHA-1s are abbreviated. We normally parse
--no-abbrev with setup_revisions(), but in the no-index case, "git diff"
calls diff_opt_parse() directly, and diff_opt_parse() didn't handle
--no-abbrev until now. (It did handle --abbrev, however.) We normally
abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff:
handle sha1 abbreviations outside of repository, 2016-10-20) recently
introduced a special case when you run "git diff" outside of a
repository.
setup_revisions() does also call diff_opt_parse(), but not for --abbrev
or --no-abbrev, which it handles itself. setup_revisions() sets
rev_info->abbrev, and later copies that to diff_options->abbrev. It
handles --no-abbrev by setting abbrev to zero. (This change doesn't
touch that.)
Setting abbrev to zero was broken in the outside-of-a-repository special
case, which until now resulted in a truly zero-length SHA-1, rather than
taking zero to mean do not abbreviate. The only way to trigger this bug,
however, was by running "git diff --raw" without either the --abbrev or
--no-abbrev options, because 1) without --raw it doesn't respect abbrev
(which is bizarre, but has been that way forever), 2) we silently clamp
--abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until
now.
The outside-of-a-repository case is one of three no-index cases. The
other two are when one of the files you're comparing is outside of the
repository you're in, and the --no-index option.
Signed-off-by: Jack Bates <jack@nottheoilrig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ec26e7977 (difftool: fix argument handling in subdirs, 2016-07-18)
corrected how path arguments are handled in a subdirectory, but
it introduced a regression in how entries outside of the
subdirectory are handled by dir-diff.
When preparing the right-side of the diff we only include the
changed paths in the temporary area.
The left side of the diff is constructed from a temporary
index that is built from the same set of changed files, but it
was being constructed from within the subdirectory. This is a
problem because the indexed paths are toplevel-relative, and
thus they were not getting added to the index.
Teach difftool to chdir to the toplevel of the repository before
preparing its temporary indexes. This ensures that all of the
toplevel-relative paths are valid.
Add test cases to more thoroughly exercise this scenario.
Reported-by: Frank Becker <fb@mooflu.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message tells the user that something went terribly wrong
and the --abort could not be performed. But the --abort is performed,
only without rewinding. By simply changing the error into a warning,
we indicate the user that she must not try something like
"git am --abort --force", instead she just has to check the HEAD.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some context before we talk about the removed code.
This paint_down() is part of step 6 of 58babff (shallow.c: the 8 steps
to select new commits for .git/shallow - 2013-12-05). When we fetch from
a shallow repository, we need to know if one of the new/updated refs
needs new "shallow commits" in .git/shallow (because we don't have
enough history of those refs) and which one.
The question at step 6 is, what (new) shallow commits are required in
other to maintain reachability throughout the repository _without_
cutting our history short? To answer, we mark all commits reachable from
existing refs with UNINTERESTING ("rev-list --not --all"), mark shallow
commits with BOTTOM, then for each new/updated refs, walk through the
commit graph until we either hit UNINTERESTING or BOTTOM, marking the
ref on the commit as we walk.
After all the walking is done, we check the new shallow commits. If we
have not seen any new ref marked on a new shallow commit, we know all
new/updated refs are reachable using just our history and .git/shallow.
The shallow commit in question is not needed and can be thrown away.
So, the code.
The loop here (to walk through commits) is basically
1. get one commit from the queue
2. ignore if it's SEEN or UNINTERESTING
3. mark it
4. go through all the parents and..
5a. mark it if it's never marked before
5b. put it back in the queue
What we do in this patch is drop step 5a because it is not
necessary. The commit being marked at 5a is put back on the queue, and
will be marked at step 3 at the next iteration. The only case it will
not be marked is when the commit is already marked UNINTERESTING (5a
does not check this), which will be ignored at step 2.
But we don't care about refs marking on UNINTERESTING. We care about the
marking on _shallow commits_ that are not reachable from our current
history (and having UNINTERESTING on it means it's reachable). So it's
ok for an UNINTERESTING not to be ref-marked.
Reported-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
First of all, 1 << 31 is technically undefined behaviour, so let's just
use an unsigned literal.
If i is 'signed int' and gcc doesn't know that i is positive, gcc
generates code to compute the C99-mandated values of "i / 32" and "i %
32", which is a lot more complicated than simple a simple shifts/mask.
The only caller of paint_down actually passes an "unsigned int" value,
but the prototype of paint_down causes (completely well-defined)
conversion to signed int, and gcc has no way of knowing that the
converted value is non-negative. Just make the id parameter unsigned.
In update_refstatus, the change in generated code is much smaller,
presumably because gcc is smart enough to see that i starts as 0 and is
only incremented, so it is allowed (per the UD of signed overflow) to
assume that i is always non-negative. But let's just help less smart
compilers generate good code anyway.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The expression info->free+size is technically undefined behaviour in
exactly the case we want to test for. Moreover, the compiler is likely
to translate the expression to
(unsigned long)info->free + size > (unsigned long)info->end
where there's at least a theoretical chance that the LHS could wrap
around 0, giving a false negative.
This might as well be written using pointer subtraction avoiding these
issues.
Signed-off-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
paint_alloc() allocates a big block of memory and splits it into
smaller, fixed size, chunks of memory whenever it's called. Each chunk
contains enough bits to present all "new refs" [1] in a fetch from a
shallow repository.
We do not check if the new "big block" is smaller than the requested
memory chunk though. If it happens, we'll happily pass back a memory
region smaller than expected. Which will lead to problems eventually.
A normal fetch may add/update a dozen new refs. Let's stay on the
"reasonably extreme" side and say we need 16k refs (or bits from
paint_alloc's perspective). Each chunk of memory would be 2k, much
smaller than the memory pool (512k).
So, normally, the under-allocation situation should never happen. A bad
guy, however, could make a fetch that adds more than 4m new/updated refs
to this code which results in a memory chunk larger than pool size.
Check this case and abort.
Noticed-by: Rasmus Villemoes <rv@rasmusvillemoes.dk>
Reviewed-by: Jeff King <peff@peff.net>
[1] Details are in commit message of 58babff (shallow.c: the 8 steps to
select new commits for .git/shallow - 2013-12-05), step 6.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to allocate a "big" block of memory in paint_alloc(). The exact
size does not really matter. But the pool size has no relation with
commit-slab. Stop using that macro here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
paint_alloc() is basically malloc(), tuned for allocating a fixed number
of bits on every call without worrying about freeing any individual
allocation since all will be freed at the end. It does it by allocating
a big block of memory every time it runs out of "free memory". "slab" is
a poor choice of name, at least poorer than "pool".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a stash, we need to look at the diff between
the working tree and HEAD, and do so using the git-diff
porcelain. Because git-diff enables porcelain config like
renames by default, this causes at least one problem. The
--name-only format will not mention the source side of a
rename, meaning we will fail to stash a deletion that is
part of a rename.
We could fix that case by passing --no-renames, but this is
a symptom of a larger problem. We should be using the
diff-index plumbing here, which does not have renames
enabled by default, and also does not respect any
potentially confusing config options.
Reported-by: Matthew Patey <matthew.patey2167@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 17966c0a6 (http: avoid disconnecting on 404s
for loose objects, 2016-07-11), we turn off curl's
FAILONERROR option and instead manually deal with failing
HTTP codes.
However, the logic to do so only recognizes HTTP 404 as a
failure. This is probably the most common result, but if we
were to get another code, the curl result remains CURLE_OK,
and we treat it as success. We still end up detecting the
failure when we try to zlib-inflate the object (which will
fail), but instead of reporting the HTTP error, we just
claim that the object is corrupt.
Instead, let's catch anything in the 300's or above as an
error (300's are redirects which are not an error at the
HTTP level, but are an indication that we've explicitly
disabled redirects, so we should treat them as such; we
certainly don't have the resulting object content).
Note that we also fill in req->errorstr, which we didn't do
before. Without FAILONERROR, curl will not have filled this
in, and it will remain a blank string. This never mattered
for the 404 case, because in the logic below we hit the
"missing_target()" branch and print nothing. But for other
errors, we'd want to say _something_, if only to fill in the
blank slot in the error message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ew/http-walker:
list: avoid incompatibility with *BSD sys/queue.h
http-walker: reduce O(n) ops with doubly-linked list
http: avoid disconnecting on 404s for loose objects
http-walker: remove unused parameter from fetch_object
