This function's visibility is about to be increased, so give it a more
distinctive name.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `lock_raw_ref()` and `lock_ref_sha1_basic()` to use
`refs_verify_refname_available()` instead of
`verify_refname_available_dir()`. This means that those callsites now
check for conflicts with all references rather than just packed refs,
but the performance cost shouldn't be significant (and will be
regained later).
These were the last callers of `verify_refname_available_dir()`, so
also delete that (very complicated) function.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It turns out that we can now implement
`refs_verify_refname_available()` based on the other virtual
functions, so there is no need for it to be defined at the backend
level. Instead, define it once in `refs.c` and remove the
`files_backend` definition.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function from `do_for_each_ref()`. It will be useful
elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a new function from `refs_resolve_ref_unsafe()`. It will be
useful elsewhere.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since references under "refs/bisect/" are per-worktree, they have to
be sought in the worktree rather than in the main repository. But
since loose references are found by traversing directories, the
reference iterator won't even get the idea to look for a
"refs/bisect/" directory in the worktree if there is not a directory
with that name in the main repository. Thus `get_ref_dir()` manually
inserts a dir_entry for "refs/bisect/" whenever it reads the entry for
"refs/".
The current code then immediately calls `read_loose_refs()` on that
directory. But since the dir_entry is created with its `incomplete`
flag set, any traversal that gets to this point will read the
directory automatically. So there is no need to call
`read_loose_refs()` explicitly; the lazy mechanism suffices.
And in fact, the attempt to `read_loose_refs()` was broken anyway.
That function needs its `dirname` argument to have a trailing `/`
character, but the invocation here was passing it "refs/bisect"
without a trailing slash. So `read_loose_refs()` would read
`$GIT_DIR/refs/bisect" correctly, but if it found an entry "foo" in
that directory, it would try to read "$GIT_DIR/refs/bisectfoo".
Normally it wouldn't find anything at that path, but the failure was
canceled out because `get_ref_dir()` *also* forgot to reset the
`REF_INCOMPLETE` bit on the dir_entry. So the read was attempted again
when it was accessed, via the lazy mechanism, and this time the read
was done correctly.
This code has been broken since it was first introduced.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It only has one caller, not worth keeping just for convenience.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A small step towards making files-backend work as a non-main ref store
using the newly added store-aware API.
For the record, `join` and `nm` on refs.o and files-backend.o tell me
that files-backend no longer uses functions that default to
get_main_ref_store().
I'm not yet comfortable at the idea of removing
files_assert_main_repository() (or converting REF_STORE_MAIN to
REF_STORE_WRITE). More staring and testing is required before that can
happen. Well, except peel_ref(). I'm pretty sure that function is safe.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The transaction struct now takes a ref store at creation and will
operate on that ref store alone.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is not meant to cover all existing API. It adds enough to test ref
stores with the new test program test-ref-store, coming soon and to be
used by files-backend.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is intended to replace *_submodule() refs API. It provides
a ref store for a specific submodule, which can be operated on by a new
set of refs API.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend.c is unlearning submodules. Instead of having a specific
check for submodules to see what operation is allowed, files backend
now takes a set of flags at init. Each operation will check if the
required flags is present before performing.
For now we have four flags: read, write and odb access. Main ref store
has all flags, obviously, while submodule stores are read-only and have
access to odb (*).
The "main" flag stays because many functions in the backend calls
frontend ones without a ref store, so these functions always target the
main ref store. Ideally the flag should be gone after ref-store-aware
api is in place and used by backends.
(*) Submodule code needs for_each_ref. Try take REF_STORE_ODB flag
out. At least t3404 would fail. The "have access to odb" in submodule is
a bit hacky since we don't know from he whether add_submodule_odb() has
been called.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
files-backend is now initialized with a $GIT_DIR. Converting a submodule
path to where real submodule gitdir is located is done in get_ref_store().
This gives a slight performance improvement for submodules since we
don't convert submodule path to gitdir at every backend call like
before. We pay that once at ref-store creation.
More cleanup in files_downcast() and files_assert_main_repository()
follows shortly. It's separate to keep noises from this patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs is learning to avoid path rewriting that is done by
strbuf_git_path_submodule(). Factor out this code so it could be reused
by refs_* functions.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_ref_store() will soon be renamed to get_submodule_ref_store().
Together with future get_worktree_ref_store(), the three functions
provide an appropriate ref store for different operation modes. New APIs
will be added to operate directly on ref stores.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the last function in this code (besides public API) that takes
submodule argument and handles both main/submodule cases. Break it down,
move main store registration in get_main_ref_store() and keep the rest
in register_submodule_ref_store().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This helps the future changes in this code. And because get_ref_store()
is destined to become get_submodule_ref_store(), the "get main store"
code path will be removed eventually. After this the patch to delete
that code will be cleaner.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With get_main_ref_store() being used inside get_ref_store(),
lookup_ref_store() is only used for submodule code path. Rename to
reflect that and delete dead code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given $GIT_DIR and $GIT_COMMON_DIR, files-backend is now in charge of
deciding what goes where (*). The end goal is to pass $GIT_DIR only. A
refs "view" of a linked worktree is a logical ref store that combines
two files backends together.
(*) Not entirely true since strbuf_git_path_submodule() still does path
translation underneath. But that's for another patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
This automatically adds the "if submodule then use the submodule version
of git_path" to other call sites too. But it does not mean those
operations are submodule-ready. Not yet.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes reflog path building consistent, always in the form of
strbuf_git_path(sb, "logs/%s", refname);
It reduces the mental workload a bit in the next patch when that
function call is converted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and friends are going to be killed in files-backend.c in near
future. And because there's a risk with overwriting buffer in
git_path(), let's convert them all to strbuf_git_path(). We'll have
easier time killing/converting strbuf_git_path() then because we won't
have to worry about memory management again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a no-op patch. It prepares the function so that we can release
resources (to be added later in this function) before we return.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep repo-related path handling in one place. This will make it easier
to add submodule/multiworktree support later.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_dir() can do adjust_shared_perm() internally, and init-db
has always created 'refs' in shared mode since the beginning,
af6e277c5e (git-init-db: initialize shared repositories with --shared -
2005-12-22). So this code looks like extra adjust_shared_perm calls are
unnecessary.
And they are. But let's see why there are here in the first place.
This code was added in 6fb5acfd8f (refs: add methods to init refs db -
2016-09-04). From the diff alone this looks like a faithful refactored
code from init-db.c. But there is a subtle difference:
Between the safe_create_dir() block and adjust_shared_perm() block in
the old init-db.c, we may copy/recreate directories from the repo
template. So it makes sense that adjust_shared_perm() is re-executed
then to fix potential permission screwups.
After 6fb5acfd8f, refs dirs are created after template is copied. Nobody
will change directory permission again. So the extra adjust_shared_perm()
is redudant. Delete them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not in the diff context, but files_downcast() is called before this
check. If "refs" is NULL, we would have segfaulted before reaching the
check here. And we should never see NULL refs in backend code (frontend
should have caught it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Created in 5f3c3a4e6f (files_log_ref_write: new function - 2015-11-10)
but probably never used outside refs-internal.c
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git revert -m 0 $merge_commit" complained that reverting a merge
needs to say relative to which parent the reversion needs to
happen, as if "-m 0" weren't given. The correct diagnosis is that
"-m 0" does not refer to the first parent ("-m 1" does). This has
been fixed.
* jk/cherry-pick-0-mainline:
cherry-pick: detect bogus arguments to --mainline
The start-up sequence of "git" needs to figure out some configured
settings before it finds and set itself up in the location of the
repository and was quite messy due to its "chicken-and-egg" nature.
The code has been restructured.
* js/early-config:
setup.c: mention unresolved problems
t1309: document cases where we would want early config not to die()
setup_git_directory_gently_1(): avoid die()ing
t1309: test read_early_config()
read_early_config(): really discover .git/
read_early_config(): avoid .git/config hack when unneeded
setup: make read_early_config() reusable
setup: introduce the discover_git_directory() function
setup_git_directory_1(): avoid changing global state
setup: prepare setup_discovered_git_dir() for the root directory
setup_git_directory(): use is_dir_sep() helper
t7006: replace dubious test
Our source code has used the SHA1_HEADER cpp macro after "#include"
in the C code to switch among the SHA-1 implementations. Instead,
list the exact header file names and switch among implementations
using "#ifdef BLK_SHA1/#include "block-sha1/sha1.h"/.../#endif";
this helps some IDE tools.
* bc/sha1-header-selection-with-cpp-macros:
hash.h: move SHA-1 implementation selection into a header file
"git status --porcelain" is supposed to give a stable output, but a
few strings were left as translatable by mistake.
* mg/status-porcelain-no-i18n:
git-status: make porcelain more robust
"git add -p <pathspec>" unnecessarily expanded the pathspec to a
list of individual files that matches the pathspec by running "git
ls-files <pathspec>", before feeding it to "git diff-index" to see
which paths have changes, because historically the pathspec
language supported by "diff-index" was weaker. These days they are
equivalent and there is no reason to internally expand it. This
helps both performance and avoids command line argument limit on
some platforms.
* jk/add-i-use-pathspecs:
add--interactive: do not expand pathspecs with ls-files
"Dumb http" transport used to misparse a nonsense http-alternates
response, which has been fixed.
* jk/http-walker-buffer-underflow-fix:
http-walker: fix buffer underflow processing remote alternates
The pathspec mechanism learned to further limit the paths that
match the pattern to those that have specified attributes attached
via the gitattributes mechanism.
* bw/attr-pathspec:
pathspec: allow escaped query values
pathspec: allow querying for attributes
"git tag --contains" used to (ab)use the object bits to keep track
of the state of object reachability without clearing them after
use; this has been cleaned up and made to use the newer commit-slab
facility.
* jk/ref-filter-flags-cleanup:
ref-filter: use separate cache for contains_tag_algo
ref-filter: die on parse_commit errors
ref-filter: use contains_result enum consistently
ref-filter: move ref_cbdata definition into ref-filter.c
From a working tree of a repository, a new option of "rev-parse"
lets you ask if the repository is used as a submodule of another
project, and where the root level of the working tree of that
project (i.e. your superproject) is.
* sb/rev-parse-show-superproject-root:
rev-parse: add --show-superproject-working-tree
Picking two versions of Git and running tests to make sure the
older one and the newer one interoperate happily has now become
possible.
* jk/interop-test:
t/interop: add test of old clients against modern git-daemon
t: add an interoperability test harness
The experimental "split index" feature has gained a few
configuration variables to make it easier to use.
* cc/split-index-config: (22 commits)
Documentation/git-update-index: explain splitIndex.*
Documentation/config: add splitIndex.sharedIndexExpire
read-cache: use freshen_shared_index() in read_index_from()
read-cache: refactor read_index_from()
t1700: test shared index file expiration
read-cache: unlink old sharedindex files
config: add git_config_get_expiry() from gc.c
read-cache: touch shared index files when used
sha1_file: make check_and_freshen_file() non static
Documentation/config: add splitIndex.maxPercentChange
t1700: add tests for splitIndex.maxPercentChange
read-cache: regenerate shared index if necessary
config: add git_config_get_max_percent_split_change()
Documentation/git-update-index: talk about core.splitIndex config var
Documentation/config: add information for core.splitIndex
t1700: add tests for core.splitIndex
update-index: warn in case of split-index incoherency
read-cache: add and then use tweak_split_index()
split-index: add {add,remove}_split_index() functions
config: add git_config_get_split_index()
...
