Unify the index-pack arguments used when processing the inline pack and
when downloading packfiles referenced by URIs. This is done by teaching
get_pack() to also store the index-pack arguments whenever at least one
packfile URI is given, and then when processing the packfile URI(s),
using the stored arguments.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the next step in teaching fetch-pack to pass its index-pack
arguments when processing packfiles referenced by URIs.
The "--keep" in fetch-pack.c will be replaced with a full message in a
subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when fetching, packfiles referenced by URIs are run through
index-pack without any arguments other than --stdin and --keep, no
matter what arguments are used for the packfile that is inline in the
fetch response. As a preparation for ensuring that all packs (whether
inline or not) use the same index-pack arguments, teach the http
subsystem to allow custom index-pack arguments.
http-fetch has been updated to use the new API. For now, it passes
--keep alone instead of --keep with a process ID, but this is only
temporary because http-fetch itself will be taught to accept index-pack
parameters (instead of using a hardcoded constant) in a subsequent
commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
f4ed0af6 (Merge branch 'nd/columns', 2012-05-03) brought in three
cut-and-pasted copies of malformatted descriptions. Let's fix them
all the same way by marking the configuration variable names up as
monospace just like the command line option `--column` is typeset.
While we are at it, correct a missing space after the full stop that
ends the sentence.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chunk-based file format is now an API in the code, but we should
also take time to document it as a file format. Specifically, it matches
the CHUNK LOOKUP sections of the commit-graph and multi-pack-index
files, but there are some commonalities that should be grouped in this
document.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before refactoring into the chunk-format API, the commit-graph parsing
logic included checks for duplicate chunks. It is unlikely that we would
desire a chunk-based file format that allows duplicate chunk IDs in the
table of contents, so add duplicate checks into
read_table_of_contents().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calculating the sizes of certain chunks, we should use 64-bit
multiplication always. This allows us to properly predict the chunk
sizes without risk of overflow.
Other possible overflows were discovered by evaluating each
multiplication in midx.c and ensuring that at least one side of the
operator was of type size_t or off_t.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of parsing the table of contents directly, use the chunk-format
API methods read_table_of_contents() and pair_chunk(). In particular, we
can use the return value of pair_chunk() to generate an error when a
required chunk is missing.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of parsing the table of contents directly, use the chunk-format
API methods read_table_of_contents() and pair_chunk(). While the current
implementation loses the duplicate-chunk detection, that will be added
in a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the capability to read the table of contents, then pair the chunks
with necessary logic using read_chunk_fn pointers. Callers will be added
in future changes, but the typical outline will be:
1. initialize a 'struct chunkfile' with init_chunkfile(NULL).
2. call read_table_of_contents().
3. for each chunk to parse,
a. call pair_chunk() to assign a pointer with the chunk position, or
b. call read_chunk() to run a callback on the chunk start and size.
4. call free_chunkfile() to clear the 'struct chunkfile' data.
We are re-using the anonymous 'struct chunkfile' data, as it is internal
to the chunk-format API. This gives it essentially two modes: write and
read. If the same struct instance was used for both reads and writes,
then there would be failures.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The chunk-format API allows writing the table of contents and all chunks
using the anonymous 'struct chunkfile' type. We only need to convert our
local chunk logic to this API for the multi-pack-index writes to share
that logic with the commit-graph file writes.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most expensive operations in write_midx_internal() use the context
struct's progress member, and these indicate the process of the
expensive operations within the chunk writing methods. However, there is
a competing progress struct that counts the progress over all chunks.
This is not very helpful compared to the others, so drop it.
This also reduces our barriers to combining the chunk writing code with
chunk-format.c.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, the chunk-writing methods in midx.c have returned the
amount of data written so the writer method could compare this with the
table of contents. This presents with some interesting issues:
1. If a chunk writing method has a bug that miscalculates the written
bytes, then we can satisfy the table of contents without actually
writing the right amount of data to the hashfile. The commit-graph
writing code checks the hashfile struct directly for a more robust
verification.
2. There is no way for a chunk writing method to gracefully fail.
Returning an int presents an opportunity to fail without a die().
3. The current pattern doesn't match chunk_write_fn type exactly, so we
cannot share code with commit-graph.c
For these reasons, convert the midx chunk writer methods to return an
'int'. Since none of them fail at the moment, they all return 0.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "uint32_t num_large_offsets" into the context. With
this new data, write_midx_large_offsets() now matches the
chunk_write_fn type.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "uint32_t *pack_perm" and large_offsets_needed bit
into the context.
Update write_midx_object_offsets() to match chunk_write_fn.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align write_midx_internal() with the chunk-format API,
continue to group necessary data into "struct write_midx_context". This
change collects the "struct pack_midx_entry *entries" list and its count
into the context.
Update write_midx_oid_fanout() and write_midx_oid_lookup() to take the
context directly, as these are easy conversions with this new data.
Only the callers of write_midx_object_offsets() and
write_midx_large_offsets() are updated here, since additional data in
the context before those methods can match chunk_write_fn.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to align the write_midx_internal() to use the chunk-format
API, start converting chunk writing methods to match chunk_write_fn. The
first case is to convert write_midx_pack_names() to take "void *data".
We already have the necessary data in "struct write_midx_context", so
this conversion is rather mechanical.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In an effort to streamline our chunk-based file formats, align some of
the code structure in write_midx_internal() to be similar to the
patterns in write_commit_graph_file().
Specifically, let's create a "struct write_midx_context" that can be
used as a data parameter to abstract function types.
This change only renames "struct pack_info" to "struct
write_midx_context" and the names of instances from "packs" to "ctx". In
future changes, we will expand the data inside "struct
write_midx_context" and align our chunk-writing method with the
chunk-format API.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-graph write logic is ready to make use of the chunk-format
write API. Each chunk write method is already in the correct prototype.
We only need to use the 'struct chunkfile' pointer and the correct API
calls.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of combining the logic from the commit-graph and
multi-pack-index file formats, create a new chunk-format API. Use a
'struct chunkfile' pointer to keep track of data that has been
registered for writes. This struct is anonymous outside of
chunk-format.c to ensure no user attempts to interfere with the data.
The next change will use this API in commit-graph.c, but the general
approach is:
1. initialize the chunkfile with init_chunkfile(f).
2. add chunks in the intended writing order with add_chunk().
3. write any header information to the hashfile f.
4. write the chunkfile data using write_chunkfile().
5. free the chunkfile struct using free_chunkfile().
Helped-by: Taylor Blau <me@ttaylorr.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both AsciiDoc and Asciidoctor are eager to pick up the e-mail addresses
in this document and turn them into references at the bottom of the
manpage / clickable links. We don't really need that for these dummy
addresses. Spell "@" as "@" to make them not do this. In the open
block, we can instead avoid this by indenting the contents, similar to
the earlier blocks.
Fix a backtick which should have been a single quote mark. With all the
quoting that is going on around here, this mistake trips up the parsing
and rendering quite a bit.
Before this commit, we have the same failure mode with AsciiDoc 8.6.10
and Asciidoctor 1.5.5, and this change makes both of them happy.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we write `<name>`s with the "s" tucked on to the closing backtick,
we end up rendering the backticks literally. Rephrase this sentence
slightly to render this as monospace.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
The error codepath around the "--temp/--prefix" feature of "git
checkout-index" has been improved.
* mt/checkout-index-corner-cases:
checkout-index: omit entries with no tempname from --temp output
write_entry(): fix misuses of `path` in error messages
Objects that lost references can be pruned away, even when they
have notes attached to it (and these notes will become dangling,
which in turn can be pruned with "git notes prune"). This has been
clarified in the documentation.
* mz/doc-notes-are-not-anchors:
docs: clarify that refs/notes/ do not keep the attached objects alive
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
The error message given when a configuration variable that is
expected to have a boolean value has been improved.
* ak/config-bad-bool-error:
config: improve error message for boolean config
"git reflog expire --stale-fix" can be used to repair the reflog by
removing entries that refer to objects that have been pruned away,
but was not careful to tolerate missing objects.
* js/reflog-expire-stale-fix:
reflog expire --stale-fix: be generous about missing objects
When certain features (e.g. grafts) used in the repository are
incompatible with the use of the commit-graph, we used to silently
turned commit-graph off; we now tell the user what we are doing.
* js/commit-graph-warning:
commit-graph: when incompatible with graphs, indicate why
Test to make sure "git rev-parse one-thing one-thing" gives
the same thing twice (when one-thing is --since=X).
* ew/rev-parse-since-test:
t1500: ensure current --since= behavior remains
Avoid individual tests in t5411 from getting affected by each other
by forcing them to use separate output files during the test.
* jx/t5411-unique-filenames:
t5411: refactor check of refs using test_cmp_refs
t5411: use different out file to prevent overwriting
Fix "git fsck --name-objects" which apparently has not been used by
anybody who is motivated enough to report breakage.
* js/fsck-name-objects-fix:
fsck --name-objects: be more careful parsing generation numbers
t1450: robustify `remove_object()`
The .mailmap is documented to be read only from the root level of a
working tree, but a stray file in a bare repository also was read
by accident, which has been corrected.
* jk/mailmap-only-at-root:
mailmap: only look for .mailmap in work tree
"git grep --untracked" is meant to be "let's ALSO find in these
files on the filesystem" when looking for matches in the working
tree files, and does not make any sense if the primary search is
done against the index, or the tree objects. The "--cached" and
"--untracked" options have been marked as mutually incompatible.
* mt/grep-cached-untracked:
grep: error out if --untracked is used with --cached
"git mergetool" feeds three versions (base, local and remote) of
a conflicted path unmodified. The command learned to optionally
prepare these files with unconflicted parts already resolved.
* sh/mergetool-hideresolved:
mergetool: add per-tool support and overrides for the hideResolved flag
mergetool: break setup_tool out into separate initialization function
mergetool: add hideResolved configuration
Even though invocations of "die()" were logged to the trace2
system, "BUG()"s were not, which has been corrected.
* jt/trace2-BUG:
usage: trace2 BUG() invocations
The "git range-diff" command learned "--(left|right)-only" option
to show only one side of the compared range.
* js/range-diff-one-side-only:
range-diff: offer --left-only/--right-only options
range-diff: move the diffopt initialization down one layer
range-diff: combine all options in a single data structure
range-diff: simplify code spawning `git log`
range-diff: libify the read_patches() function again
range-diff: avoid leaking memory in two error code paths
There are other ways than ".." for a single token to denote a
"commit range", namely "<rev>^!" and "<rev>^-<n>", but "git
range-diff" did not understand them.
* js/range-diff-wo-dotdot:
range-diff(docs): explain how to specify commit ranges
range-diff/format-patch: handle commit ranges other than A..B
range-diff/format-patch: refactor check for commit range
"git clone" tries to locally check out the branch pointed at by
HEAD of the remote repository after it is done, but the protocol
did not convey the information necessary to do so when copying an
empty repository. The protocol v2 learned how to do so.
* jt/clone-unborn-head:
clone: respect remote unborn HEAD
connect, transport: encapsulate arg in struct
ls-refs: report unborn targets of symrefs
Piecemeal of rewrite of "git bisect" in C continues.
* mr/bisect-in-c-4:
bisect--helper: retire `--check-and-set-terms` subcommand
bisect--helper: reimplement `bisect_skip` shell function in C
bisect--helper: retire `--bisect-auto-next` subcommand
bisect--helper: use `res` instead of return in BISECT_RESET case option
bisect--helper: retire `--bisect-write` subcommand
bisect--helper: reimplement `bisect_replay` shell function in C
bisect--helper: reimplement `bisect_log` shell function in C
Fix incremental update of commit-graph file around corrected commit
date data.
* ds/commit-graph-genno-fix:
commit-graph: prepare commit graph
commit-graph: be extra careful about mixed generations
commit-graph: compute generations separately
commit-graph: validate layers for generation data
commit-graph: always parse before commit_graph_data_at()
commit-graph: use repo_parse_commit
The commit-graph learned to use corrected commit dates instead of
the generation number to help topological revision traversal.
* ak/corrected-commit-date:
doc: add corrected commit date info
commit-reach: use corrected commit dates in paint_down_to_common()
commit-graph: use generation v2 only if entire chain does
commit-graph: implement generation data chunk
commit-graph: implement corrected commit date
commit-graph: return 64-bit generation number
commit-graph: add a slab to store topological levels
t6600-test-reach: generalize *_three_modes
commit-graph: consolidate fill_commit_graph_info
revision: parse parent in indegree_walk_step()
commit-graph: fix regression when computing Bloom filters
Git Protocol version 2[1] defines 0002 as a Message Packet that indicates
the end of a response for stateless connections.
Change the naming of the 0002 Packet to 'Response End' to match the
parsing introduced in Wireshark's MR !1922 for consistency. A subsequent
MR in Wireshark will address additional mismatches.
[1] kernel.org/pub/software/scm/git/docs/technical/protocol-v2.html
[2] gitlab.com/wireshark/wireshark/-/merge_requests/1922
Signed-off-by: Joey Salazar <jgsal@protonmail.com>
Reviewed-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not immediately obvious why --disk-usage might be a useful thing.
These examples show off a few of the real-world cases I've used it for.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently don't show any examples of using git-rev-list at all. Let's
add some pretty elementary examples. They likely seem obvious to anybody
who has worked with the tool for a while, but my purpose here is
two-fold:
- they may be enlightening to people who haven't used the tool a lot
to give a general flavor of how it is meant to be used
- they can serve as a starting point for adding more interesting
examples (we can do that without the basic ones, of course, but I
think it makes sense to show off the building blocks)
This set is far from exhaustive, but again, the purpose is to be a
starting point for further additions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan
Junio C Hamano
Derrick Stolee
Martin Ågren
Joey Salazar
Jeff King