* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
* jc/quickfetch:
Make sure quickfetch is not fooled with a previous, incomplete fetch.
git-fetch: use fetch--tool pick-rref to avoid local fetch from alternate
git-fetch--tool pick-rref
* maint:
git-shortlog: Fix two formatting errors in asciidoc documentation
Fix overwriting of files when applying contextually independent diffs
git-svn: don't allow globs to match regular files
Noticed by applying two diffs of different contexts to the same file.
The check for existence of a file was wrong: the test assumed it was
a directory and reset the errno (twice: directly and by calling
lstat). So if an entry existed and was _not_ a directory no attempt
was made to rename into it, because the errno (expected by renaming
code) was already reset to 0. This resulted in error:
fatal: unable to write file file mode 100644
For Linux, removing "errno = 0" is enough, as lstat wont modify errno
if it was successful. The behavior should not be depended upon,
though, so modify the "if" as well.
The test simulates this situation.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/read-tree-df:
t3030: merge-recursive backend test.
merge-recursive: handle D/F conflict case more carefully.
merge-recursive: do not barf on "to be removed" entries.
Treat D/F conflict entry more carefully in unpack-trees.c::threeway_merge()
t1000: fix case table.
This updates git-rev-list --objects to be a bit more careful
when listing a blob object to make sure the blob actually
exists, and uses it to make sure the quick-fetch optimization we
introduced earlier is not fooled by a previous incomplete fetch.
The quick-fetch optimization works by running this command:
git rev-list --objects <<commit-list>> --not --all
where <<commit-list>> is a list of commits that we are going to
fetch from the other side. If there is any object missing to
complete the <<commit-list>>, the rev-list would fail and die
(say, the commit was in our repository, but its tree wasn't --
then it will barf while trying to list the blobs the tree
contains because it cannot read that tree).
Usually we do not have the objects (otherwise why would we
fetching?), but in one important special case we do: when the
remote repository is used as an alternate object store
(i.e. pointed by .git/objects/info/alternates). We could check
.git/objects/info/alternates to see if the remote we are
interacting with is one of them (or is used as an alternate,
recursively, by one of them), but that check is more cumbersome
than it is worth.
The above check however did not catch missing blob, because
object listing code did not read nor check blob objects, knowing
that blobs do not contain any further references to other
objects. This commit fixes it with practically unmeasurable
overhead.
I've benched this with
git rev-list --objects --all >/dev/null
in the kernel repository, with three different implementations
of the "check-blob".
- Checking with has_sha1_file() has negligible (unmeasurable)
performance penalty.
- Checking with sha1_object_info() makes it somewhat slower,
perhaps by 5%.
- Checking with read_sha1_file() to cause a fully re-validation
is prohibitively expensive (about 4 times as much runtime).
In my original patch, I had this as a command line option, but
the overhead is small enough that it is not really worth it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: also fix 0a5280a9 that incorrectly changed the title of one test.]
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/wrap-log:
Fix permissions on test scripts
Fix t4201: accidental arithmetic expansion
shortlog -w: make wrap-line behaviour optional.
Use print_wrapped_text() in shortlog
Make every test executable. Remove exec-attribute from included shell files,
they can't used standalone anyway.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
instead of embedded subshell. It actually breaks here (dash as /bin/sh):
t4201-shortlog.sh: 27: Syntax error: Missing '))'
FATAL: Unexpected exit with code 2
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a fairly complete list of tests for various aspects of pack
index versions 1 and 2.
Tests on index v2 include 32-bit and 64-bit offsets, as well as a nice
demonstration of the flawed repacking integrity checks that index
version 2 intend to solve over index version 1 with the per object CRC.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add testcase for format-patch --subject-prefix support.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have fairly extensive coverage of read-tree 3-way machinery,
and many Porcelain-ish tests use git-merge front-end tests, but
we did not have good basic test for merge-recursive, which made
it very hard to hack on it.
I used this during the recent work to teach D/F conflicts to
merge-recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Case #10 is not handled with unpack-trees.c:threeway_merge()
internally, unless under the agressive rule, and it is not a
bug. As the test expects, ND (one side did not do anything,
other side deleted) case was meant to be handled by the caller's
policy (e.g. git-merge-one-file or git-merge-recursive).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some oneline descriptions are just too long. In shortlog, it looks much
nicer when they are wrapped. Since print_wrapped_text() is UTF-8 aware,
it also works with those descriptions.
[jc: with minimum fixes]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As noted by Junio, --format=tar should be assumed if no format
was specified.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* cc/bisect:
git-bisect: allow bisecting with only one bad commit.
t6030: add a bit more tests to git-bisect
git-bisect: modernization
Documentation: bisect: "start" accepts one bad and many good commits
Bisect: teach "bisect start" to optionally use one bad and many good revs.
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
In the test 'compare delta flavors', /usr/bin/stat is used to get file size.
This isn't portable. There already is a dependency on Perl, use its '-s'
operator to get the file size.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to say:
git bisect start
git bisect bad $bad
git bisect next
to start bisection without knowing a good commit. This would
have you try a commit that is half-way since the beginning of
the history, which is rather wasteful if you already know a good
commit, but if you don't (or your history is short enough that
you do not care), there is no reason not to allow this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The renaming without config test changed a branch from q to Q, which
fails on non-case sensitive file systems. Change the test to use q
and q2.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Fix lseek(2) calls with args 2 and 3 swapped
Honor -p<n> when applying git diffs
Fix dependency of common-cmds.h
Fix renaming branch without config file
DESTDIR support for git/contrib/emacs
gitweb: Fix bug in "blobdiff" view for split (e.g. file to symlink) patches
Document --left-right option to rev-list.
Revert "builtin-archive: use RUN_SETUP"
rename contrib/hooks/post-receieve-email to contrib/hooks/post-receive-email.
rerere: make sorting really stable.
Fix t4200-rerere for white-space from "wc -l"
One bad commit is fundamentally needed for bisect to run,
and if we beforehand know more good commits, we can narrow
the bisect space down without doing the whole tree checkout
every time we give good commits.
This patch implements:
git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
as a short-hand for this command sequence:
git bisect start
git bisect bad $bad
git bisect good $good1 $good2...
On the other hand, there may be some confusion between revs
(<bad> and <good>...) and <pathspec>... if -- is not used
and if an invalid rev or a pathspec that looks like a rev is
given.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user is trying to apply a Git generated diff file and they
have specified a -p<n> option, where <n> is not 1, the user probably
has a good reason for doing this. Such as they are me, trying to
apply a patch generated in git.git for the git-gui subdirectory to
the git-gui.git repository, where there is no git-gui subdirectory
present.
Users shouldn't supply -p2 unless they mean it. But if they are
supplying it, they probably have thought about how to make this
patch apply to their working directory, and want to risk whatever
results may come from that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git_config_rename_section return success if no config file
exists. Otherwise, renaming a branch would abort, leaving the
repository in an inconsistent state.
[jc: test]
Signed-off-by: Geert Bosch <bosch@gnat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier code does not swap hunks when the beginning of the
first side is identical to the whole of the second side. In
such a case, the first one should sort later.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On OS X, wc outputs 6 spaces before the number of lines, so the test
expecting the string "10" failed. Do not quote $cmd to strip away
the problematic whitespace as other tests do.
Also fix the grammar of the test name while making changes to it.
There's only one preimage, so it's "has", not "have".
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bisect:
make the previous optimization work also on path-limited rev-list --bisect
rev-list --bisect: Fix "halfway" optimization.
t6004: add a bit more path optimization test.
git-rev-list --bisect: optimization
git-rev-list: add --bisect-vars option.
t6002: minor spelling fix.
You cannot currently checkout the tip of an existing branch
without moving to the branch.
This allows you to detach your HEAD and place it at such a
commit, with:
$ git checkout master^0
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a file has more then one conflicting hunks, it repeated the
contents of previous hunks in output for later ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't translate the patch to UTF-8, instead preserve the data as
is. This also reverts a test case that was included in the
original patch series.
Also allow overwriting the authorship and title information we
gather from RFC2822 mail headers with additional in-body
headers, which was pointed out by Linus.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Elias Pipping:
> I'm on a mac, hence /usr/bin/sed is not gnu sed, which makes
> t4118 fail.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Ack'd-by: Elias Pipping <pipping@macports.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are two breakages in the %P/%p interpolation. It appended
an excess SP at the end of the list, and it gave uninitialized
contents of a buffer on the stack for root commits.
This fixes it, while updating the t6006 test which expected the
wrong output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
These could stand to be a little more complex, but it should
at least catch obvious problems (like the recently fixed %ct
bug).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This idea was suggested by Bill Lear
(Message-ID: <17920.38942.364466.642979@lisa.zopyra.com>)
and I think it is a very good one.
This patch adds a new test file for "git bisect run", but there
is currently only one basic test.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Elias Pipping:
> I'm on a mac, hence /usr/bin/sed is not gnu sed, which makes
> t4118 fail.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Ack'd-by: Elias Pipping <pipping@macports.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test expects --bisect option can be configured with by setting
$_bisect_option. So let's allow that uniformly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
