This patch implements reading values from "man.<tool>.path"
configuration variables, and using these values as pathes to
the man viewer <tool>s when lauching them.
This makes it possible to use different version of the tools
than the one on the current PATH, or maybe a custom script.
In this patch we also try to launch "konqueror" using
"kfmclient" even if a path to a konqueror binary is given
in "man.konqueror.path".
The "man_viewer_list" becomes a simple string list to simplify
things for the following patches.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote: create fetch config lines with '+'
push: allow unqualified dest refspecs to DWIM
doc/git-gc: add a note about what is collected
t5516: remove ambiguity test (1)
Linked glossary from cvs-migration page
write-tree: properly detect failure to write tree objects
Since git-remote always uses remote tracking branches, it
should be safe to always force updates of those branches.
I.e., we should generate
fetch = +refs/heads/*:refs/remotes/$remote/*
instead of
fetch = refs/heads/*:refs/remotes/$remote/*
This was the behavior of the perl version, which seems to
have been lost in the C rewrite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, a push like:
git push remote src:dst
would go through the following steps:
1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems to be a FAQ that people try running git-gc, and
then get puzzled about why the size of their .git directory
didn't change. This note mentions the reasons why things
might unexpectedly get kept.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test tried to push into a remote with ambiguous refs in
remotes/$x/master and remotes/$y/master. However, the remote
never actually tells us about the refs/remotes hierarchy, so
we don't even see this ambiguity.
The test happened to pass because we were simply looking for
failure, and the test fails for another reason: the dst
refspec does not exist and does not begin with refs/, making
it invalid.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coming from CVS, I found the git glossary vital to learning git and learning
how terms in git correlate to the cvs terminology with which I am familiar.
This patch links the glossary from the cvs-migration page so cvs users will
be able to fine the glossary as soon as they start looking at git documents.
Signed-off-by: Matt Graham <mdg149@gmail.com>
Acked-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tomasz Fortuna reported that "git commit" does not error out properly when
it cannot write tree objects out. "git write-tree" shares the same issue,
as the failure to notice the error is deep in the logic to write tree
objects out recursively.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Amend git-push refspec documentation
git-gc --prune is deprecated
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
Don't force imap.host to be set when imap.tunnel is set
git-clone.txt: Adjust note to --shared for new pruning behavior of git-gc
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
These paragraphs are a little confusing. Also, make it clearer when
you have to specify the full name for <dst>
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
25ee9731c137d0a24b0f4879eb0b0cce9b77d5b0 made the '--prune' option
deprecated and removed its description from the git-gc man page. This
patch removes all references to this option from the rest of the Git
documentation.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, there is a possible interaction with UTF-8 locales in
combination with PERL_UNICODE, resulting in "inconsistent size: 40" or
"read:"-type errors.
See also:
perldoc -f binmode
<http://perldoc.perl.org/perl581delta.html#UTF-8-no-longer-default-under-UTF-8-locales>
Signed-off-by: Michael Weber <michaelw@foldr.org>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff --name-status outputs letters, but the meaning of those letters
is documented elsewhere. Add a note to make the manpage more intuitive.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for git-imap-send suggests a tunnel setting such as
Tunnel = "ssh -q user@server.com /usr/bin/imapd ./Maildir 2> /dev/null"
which works wonderfully and doesn't require a username, password or port
setting.
However, git-imap-send currently requires that the imap.host variable be
set in the config even when it was unused. This patch changes imap-send
to only require that the imap.host setting is set if imap.tunnel is not
set. Otherwise, server.host is set to "tunnel" for reporting purposes.
Acked-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since git-gc now always calls prune, even with --auto, unreferenced objects
may be removed by more operations than just git-gc. This is important for
clones created using --shared or --reference.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to import from svn using an author file, git-svn bails out
if it encounters a blank author. The attached patch changes this
behavior and allow using the author file with blanks authors.
I came across this bug while importing from a cvs2svn repo where the
initial revision (1) has a blank author. This doesn't break the behavior
of bailing out when an unknown author is encountered.
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the errno could have been lost due to an intervening
close() call.
This patch also contains minor cosmetic changes.
Signed-off-by: Ariel Badichi <abadichi@bezeqint.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: fix accidental removal of a trailing space in signature line
Escape project names before creating pathinfo URLs
Escape project name in regexp
bash: Add completion for git diff --base --ours --theirs
diff-options.txt: document the new "--dirstat" option
post-receive-email adds a signature to the end of emails in
generate_email_footer(). The signature was separated from the main email
body using the standard string "-- ". (see RFC 3676)
a6080a0 (War on whitespace, 2007-06-07) removed the trailing whitespace
from "-- ", leaving it as "--", which is not a correct signature
separator.
This patch restores the missing space, but does it in a way that will
not set off the trailing whitespace alarms.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After typing 'git remote ', the subcommand options were not shown. Fix it
by adding the missing __gitcomp call.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a project name contains special URL characters like +, gitweb's links
break in subtle ways. The solution is to pass the project name through
esc_url() and using the return value.
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The project name, when used in a regular expression, needs to be quoted
properly, so that stuff like '++' in the project name does not cause
Perl to barf.
Related info: http://bugs.debian.org/476076
This is a bug in Perl's CGI.pm, but fixing that exposed a similar bug in
gitweb.perl
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the similar patch from David Kågedal [1], "this will make
it a little less posix-dependent and more efficient." However, there
are two other areas that need to replaced, namely
git-run-command-region and git-run-hooks. This patch implements the
changes of [1] onto those Emacs Lisp functions.
If unpatched, using the git port "msysgit" on Windows will require
defadvice changes as shown at [2] (also explained at 4msysgit.git
[3]).
I have tested git-run-command-region on msysgit, because this is
always called by git-commit (via git-commit-tree <- git-do-commit <-
git-commit-file). However, I could not test git-run-hooks because it
currently does not work on the Emacs Windows port. The latter reports
the hooks files as a+rw and a-x, despite msysgit and cygwin chmod
setting on the respective files.
References:
[1] f27e55864317611385be4d33b3c53ca787379df9
[2] http://groups.google.com/group/msysgit/browse_thread/thread/b852fef689817707
[3] http://repo.or.cz/w/git/mingw/4msysgit.git?a=commit;h=3c30e5e87358eba7b6d7dcd6301ae8438f0c30ea
Signed-off-by: Clifford Caoile <piyo@users.sourceforge.net>
Acked-by: David Kågedal <davidk@lysator.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit adds the documentation for the new option added by 7df7c01
(Add "--dirstat" for some directory statistics, 2008-02-12).
Noticed by Clint Adams, reported through
http://bugs.debian.org/476437
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Fix 'history' view for deleted files with history
Document that WebDAV doesn't need git on the server, and works over SSL
git-remote: reject adding remotes with invalid names
am: POSIX portability fix
When asked for history of a file which is not present in given branch
("HEAD", i.e. current branch, or given by transient $hash_hase ('hb')
parameter), but is present deeper in the history (meaning that "git
rev-list --full-history $hash_base -- $file_name" is not empty), and
there is no $hash ('h') parameter set for a file, gitweb would spew
multiple of "Use of uninitialized value" warnings, and some links
would be missing. This commit fixes this bug.
This bug occurs in the rare cases when "git log -- <path>" is empty
and "git log --full-history -- <path>" is not, or to be more exact in
the cases when full-history starts later than given branch. It can
happen if you are using handcrafted gitwb URL, or if you follow
generic 'history' link or bookmark for a file which got deleted.
Gitweb tried to get file type ('tree', or 'blob', or even 'commit')
from the commit we start searching from (where the file was not
present), and not among found commits. This was the cause of "Use of
uninitialized value" warnings.
This commit also add tests for such situation to t9500 test.
While we are it, return HTTP error if there is _no_ history; it means
that file or directory was not found (for given branch). Also error
out if type of item could not be found: it should not happen now, but
better be sure.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I managed to set up a Git repository on a preconfigured WebDAV server,
and using HTTPS, without installing Git on it or changing the server
configuration. This works through a proxy too. This patch reflects
this (it previously stated that Git was _necessary_ on the server,
which isn't true). Also give a few hints to troubleshoting.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX allows echo without flag to interpret specials such as \n, and we
tried to make things portable by using printf instead where it matters.
Recently added code to "git am" had unprotected "echo", which was caught
by t4014 and Rémi Vanicat.
This should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
