As the band-aid to merge-recursive seems to regress complex merges in an
unpleasant way. The merge-recursive implementation needs to be rewritten
in such a way that it resolves renames and D/F conflicts entirely in-core
and not to touch working tree at all while doing so. But in the meantime,
this reverts commit ac9666f84 that merged the topic in its entirety.
* ci/commit--interactive-atomic:
Test atomic git-commit --interactive
Add commit to list of config.singlekey commands
Add support for -p/--patch to git-commit
Allow git commit --interactive with paths
t7501.8: feed a meaningful command
Use a temporary index for git commit --interactive
* mg/merge-ff-config:
tests: check git does not barf on merge.ff values for future versions of git
merge: introduce merge.ff configuration variable
Conflicts:
t/t7600-merge.sh
We already tested cherry-picking a root commit, but only
with the internal merge-recursive strategy. Let's also test
the recently-allowed reverting of a root commit, as well as
testing with external strategies (which until recently
triggered a segfault).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jh/dirstat-lines:
Mark dirstat error messages for translation
Improve error handling when parsing dirstat parameters
New --dirstat=lines mode, doing dirstat analysis based on diffstat
Allow specifying --dirstat cut-off percentage as a floating point number
Add config variable for specifying default --dirstat behavior
Refactor --dirstat parsing; deprecate --cumulative and --dirstat-by-file
Make --dirstat=0 output directories that contribute < 0.1% of changes
Add several testcases for --dirstat and friends
* jn/setup-revisions-glob-and-friends-passthru:
revisions: allow --glob and friends in parse_options-enabled commands
revisions: split out handle_revision_pseudo_opt function
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
The test case fails on Windows, because "a*" is an invalid file name.
Therefore, use "a[a]" instead.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Nguyen Thai Ngoc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the fix for 1.7.5 maintenance track.
* jc/maint-1.7.4-pathspec-stdin-and-cmdline:
setup_revisions(): take pathspec from command line and --stdin correctly
Update the fix for 1.7.4 maintenance track.
* jc/maint-1.6.6-pathspec-stdin-and-cmdline:
setup_revisions(): take pathspec from command line and --stdin correctly
When the command line has "--" disambiguator, we take the remainder of
argv[] as "prune_data", but when --stdin is given at the same time,
we need to append to the existing prune_data and end up attempting to
realloc(3) it. That would not work.
Fix it by consistently using append_prune_data() throughout the input
processing. Also avoid counting the number of existing paths in the
function over and over again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-add-p-overlapping-hunks:
t3701: add-p-fix makes the last test to pass
"add -p": work-around an old laziness that does not coalesce hunks
add--interactive.perl: factor out repeated --recount option
t3701: Editing a split hunk in an "add -p" session
add -p: 'q' should really quit
* dm/http-cleanup:
t5541-http-push: add test for chunked
http-push: refactor curl_easy_setup madness
http-push: use const for strings in signatures
http: make curl callbacks match contracts from curl header
* jn/ctags:
gitweb: Mark matched 'ctag' / contents tag (?by_tag=foo)
gitweb: Change the way "content tags" ('ctags') are handled
gitweb: Restructure projects list generation
Templates should be just that: A form that the user fills out, and forms
have blanks. If people are attached to not having extra whitespace in the
editor, they can simply clean up their templates.
Added test with editor adding even more whitespace.
Signed-off-by: Boris Faure <billiob@gmail.com>
Based-on-patch-by:Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git commit --interactive feel more like git add --interactive by
allowing the user to restrict the list of files they have to deal with.
A test in t7501 used to ensure that this is not allowed; no need for that
anymore.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command expects "git commit --interactive <path>" to fail because you
cannot (yet) limit "commit --interactive" with a pathspec, but even if the
command allowed to take <path>, the test would have failed as saying just
7:quit would leave the index the same as the current commit, leading to an
attempt to create an empty commit that would fail without --allow-empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kacper Kornet noticed that a $variable in "word" in the above construct is
not substituted by his pdksh. Modern POSIX compliant shells (e.g. dash,
ksh, bash) all seem to interpret POSIX "2.6.2 Parameter Expansion" that
says "word shall be subjected to tilde expansion, parameter expansion,
command substitution, and arithmetic expansion" in ${parameter<op>word},
to mean that the word is expanded as if it appeared in dq pairs, so if the
word were "'$variable'" (sans dq) it would expand to a single quote, the
value of the $variable and then a single quote.
Johannes Sixt reports that the behavior of quoting at the right of :- when
the ${...:-...} expansion appears in double-quotes was debated recently at
length at the Austin group. We can avoid this issue and future-proof the
test by a slight rewrite.
Helped-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Maybe some day in the future we will want to support a syntax
like
[merge]
ff = branch1
ff = branch2
ff = branch3
in addition to the currently permitted "true", "false", and "only"
values. So make sure we continue to treat such configurations as
though an unknown variable had been defined rather than erroring out,
until it is time to implement such a thing, so configuration files
using such a facility can be shared between present and future git.
While at it, add a few missing && and start the "combining --squash
and --no-ff" test with a known state so we can be sure it does not
succeed or fail for the wrong reason.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently verify_parents only makes sure that the earlier parents of
HEAD match the commits given, and does not care if there are more
parents. This makes it harder than one would like to check that, for
example, parent reduction works correctly when making an octopus.
Fix it by checking that HEAD^(n+1) is not a valid commit name.
Noticed while working on a new test that was supposed to create a
fast-forward one commit ahead but actually created a merge.
Reported-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable gives the default setting for --ff, --no-ff or --ff-only
options of "git merge" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The parsing of the additional command line parameters supplied to
the branch.<name>.mergeoptions configuration variable was implemented
at the wrong stage. If any merge-related variable came after we read
branch.<name>.mergeoptions, the earlier value was overwritten.
We should first read all the merge.* configuration, override them by
reading from branch.<name>.mergeoptions and then finally read from
the command line.
This patch should fix it, even though I now strongly suspect that
branch.<name>.mergeoptions that gives a single command line that
needs to be parsed was likely to be an ill-conceived idea to begin
with. Sigh...
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of git's tests write files and define shell functions and
variables that will last throughout a test script at the top of
the script, before all test assertions:
. ./test-lib.sh
VAR='some value'
export VAR
>empty
fn () {
do something
}
test_expect_success 'setup' '
... nontrivial commands go here ...
'
Two scripts use a different style with this kind of trivial code
enclosed by a test assertion; fix them. The usual style is easier to
read since there is less indentation to keep track of and no need to
worry about nested quotes; and on the other hand, because the commands
in question are trivial, it should not make the test suite any worse
at catching future bugs in git.
While at it, make some other small tweaks:
- spell function definitions with a space before () for consistency
with other scripts;
- use the self-contained command "git mktree </dev/null" in
preference to "git write-tree" which looks at the index when
writing an empty tree.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/fix-diff-files-unmerged:
diff-files: show unmerged entries correctly
diff: remove often unused parameters from diff_unmerge()
diff.c: return filepair from diff_unmerge()
test: use $_z40 from test-lib
* nd/struct-pathspec:
pathspec: rename per-item field has_wildcard to use_wildcard
Improve tree_entry_interesting() handling code
Convert read_tree{,_recursive} to support struct pathspec
Reimplement read_tree_recursive() using tree_entry_interesting()
