mirror of
https://github.com/git/git.git
synced 2024-05-18 14:46:10 +02:00
8 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Derrick Stolee
|
52fe41ff1c |
maintenance: add incremental-repack task
The previous change cleaned up loose objects using the 'loose-objects' that can be run safely in the background. Add a similar job that performs similar cleanups for pack-files. One issue with running 'git repack' is that it is designed to repack all pack-files into a single pack-file. While this is the most space-efficient way to store object data, it is not time or memory efficient. This becomes extremely important if the repo is so large that a user struggles to store two copies of the pack on their disk. Instead, perform an "incremental" repack by collecting a few small pack-files into a new pack-file. The multi-pack-index facilitates this process ever since 'git multi-pack-index expire' was added in |
||
|
Derrick Stolee
|
252cfb7cb8 |
maintenance: add loose-objects task
One goal of background maintenance jobs is to allow a user to disable auto-gc (gc.auto=0) but keep their repository in a clean state. Without any cleanup, loose objects will clutter the object database and slow operations. In addition, the loose objects will take up extra space because they are not stored with deltas against similar objects. Create a 'loose-objects' task for the 'git maintenance run' command. This helps clean up loose objects without disrupting concurrent Git commands using the following sequence of events: 1. Run 'git prune-packed' to delete any loose objects that exist in a pack-file. Concurrent commands will prefer the packed version of the object to the loose version. (Of course, there are exceptions for commands that specifically care about the location of an object. These are rare for a user to run on purpose, and we hope a user that has selected background maintenance will not be trying to do foreground maintenance.) 2. Run 'git pack-objects' on a batch of loose objects. These objects are grouped by scanning the loose object directories in lexicographic order until listing all loose objects -or- reaching 50,000 objects. This is more than enough if the loose objects are created only by a user doing normal development. We noticed users with _millions_ of loose objects because VFS for Git downloads blobs on-demand when a file read operation requires populating a virtual file. This step is based on a similar step in Scalar [1] and VFS for Git. [1] https://github.com/microsoft/scalar/blob/master/Scalar.Common/Maintenance/LooseObjectsStep.cs Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
||
|
Derrick Stolee
|
28cb5e66dd |
maintenance: add prefetch task
When working with very large repositories, an incremental 'git fetch'
command can download a large amount of data. If there are many other
users pushing to a common repo, then this data can rival the initial
pack-file size of a 'git clone' of a medium-size repo.
Users may want to keep the data on their local repos as close as
possible to the data on the remote repos by fetching periodically in
the background. This can break up a large daily fetch into several
smaller hourly fetches.
The task is called "prefetch" because it is work done in advance
of a foreground fetch to make that 'git fetch' command much faster.
However, if we simply ran 'git fetch <remote>' in the background,
then the user running a foreground 'git fetch <remote>' would lose
some important feedback when a new branch appears or an existing
branch updates. This is especially true if a remote branch is
force-updated and this isn't noticed by the user because it occurred
in the background. Further, the functionality of 'git push
--force-with-lease' becomes suspect.
When running 'git fetch <remote> <options>' in the background, use
the following options for careful updating:
1. --no-tags prevents getting a new tag when a user wants to see
the new tags appear in their foreground fetches.
2. --refmap= removes the configured refspec which usually updates
refs/remotes/<remote>/* with the refs advertised by the remote.
While this looks confusing, this was documented and tested by
|
||
|
Derrick Stolee
|
65d655b52d |
maintenance: create maintenance.<task>.enabled config
Currently, a normal run of "git maintenance run" will only run the 'gc' task, as it is the only one enabled. This is mostly for backwards- compatible reasons since "git maintenance run --auto" commands replaced previous "git gc --auto" commands after some Git processes. Users could manually run specific maintenance tasks by calling "git maintenance run --task=<task>" directly. Allow users to customize which steps are run automatically using config. The 'maintenance.<task>.enabled' option then can turn on these other tasks (or turn off the 'gc' task). Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
||
|
Derrick Stolee
|
090511bc0b |
maintenance: add --task option
A user may want to only run certain maintenance tasks in a certain order. Add the --task=<task> option, which allows a user to specify an ordered list of tasks to run. These cannot be run multiple times, however. Here is where our array of maintenance_task pointers becomes critical. We can sort the array of pointers based on the task order, but we do not want to move the struct data itself in order to preserve the hashmap references. We use the hashmap to match the --task=<task> arguments into the task struct data. Keep in mind that the 'enabled' member of the maintenance_task struct is a placeholder for a future 'maintenance.<task>.enabled' config option. Thus, we use the 'enabled' member to specify which tasks are run when the user does not specify any --task=<task> arguments. The 'enabled' member should be ignored if --task=<task> appears. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
||
|
Derrick Stolee
|
663b2b1b90 |
maintenance: add commit-graph task
The first new task in the 'git maintenance' builtin is the 'commit-graph' task. This updates the commit-graph file incrementally with the command git commit-graph write --reachable --split By writing an incremental commit-graph file using the "--split" option we minimize the disruption from this operation. The default behavior is to merge layers until the new "top" layer is less than half the size of the layer below. This provides quick writes most of the time, with the longer writes following a power law distribution. Most importantly, concurrent Git processes only look at the commit-graph-chain file for a very short amount of time, so they will verly likely not be holding a handle to the file when we try to replace it. (This only matters on Windows.) If a concurrent process reads the old commit-graph-chain file, but our job expires some of the .graph files before they can be read, then those processes will see a warning message (but not fail). This could be avoided by a future update to use the --expire-time argument when writing the commit-graph. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
||
|
Derrick Stolee
|
3ddaad0e06 |
maintenance: add --quiet option
Maintenance activities are commonly used as steps in larger scripts. Providing a '--quiet' option allows those scripts to be less noisy when run on a terminal window. Turn this mode on by default when stderr is not a terminal. Pipe the option to the 'git gc' child process. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |
||
|
Derrick Stolee
|
2057d75038 |
maintenance: create basic maintenance runner
The 'gc' builtin is our current entrypoint for automatically maintaining a repository. This one tool does many operations, such as repacking the repository, packing refs, and rewriting the commit-graph file. The name implies it performs "garbage collection" which means several different things, and some users may not want to use this operation that rewrites the entire object database. Create a new 'maintenance' builtin that will become a more general- purpose command. To start, it will only support the 'run' subcommand, but will later expand to add subcommands for scheduling maintenance in the background. For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin. In fact, the only option is the '--auto' toggle, which is handed directly to the 'gc' builtin. The current change is isolated to this simple operation to prevent more interesting logic from being lost in all of the boilerplate of adding a new builtin. Use existing builtin/gc.c file because we want to share code between the two builtins. It is possible that we will have 'maintenance' replace the 'gc' builtin entirely at some point, leaving 'git gc' as an alias for some specific arguments to 'git maintenance run'. Create a new test_subcommand helper that allows us to test if a certain subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a file. A negation mode is available that will be used in later tests. Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> |