This test was introduced in 19a0acc83e4 (t1092: test interesting
sparse-checkout scenarios, 2021-01-23), but it contains issues with quoting
that were not noticed until starting this follow-up series. The old
mechanism would drop quoting such as in
test_all_match git commit -m "touch README.md"
The above happened to work because README.md is a file in the
repository, so 'git commit -m touch REAMDE.md' would succeed by
accident.
Other cases included quoting for no good reason, so clean that up now.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test script that takes the default performance test (the Git
codebase) and multiplies it by 256 using four layers of duplicated
trees of width four. This results in nearly one million blob entries in
the index. Then, we can clone this repository with sparse-checkout
patterns that demonstrate four copies of the initial repository. Each
clone will use a different index format or mode so peformance can be
tested across the different options.
Note that the initial repo is stripped of submodules before doing the
copies. This preserves the expected data shape of the sparse index,
because directories containing submodules are not collapsed to a sparse
directory entry.
Run a few Git commands on these clones, especially those that use the
index (status, add, commit).
Here are the results on my Linux machine:
Test
--------------------------------------------------------------
2000.2: git status (full-index-v3) 0.37(0.30+0.09)
2000.3: git status (full-index-v4) 0.39(0.32+0.10)
2000.4: git add -A (full-index-v3) 1.42(1.06+0.20)
2000.5: git add -A (full-index-v4) 1.26(0.98+0.16)
2000.6: git add . (full-index-v3) 1.40(1.04+0.18)
2000.7: git add . (full-index-v4) 1.26(0.98+0.17)
2000.8: git commit -a -m A (full-index-v3) 1.42(1.11+0.16)
2000.9: git commit -a -m A (full-index-v4) 1.33(1.08+0.16)
It is perhaps noteworthy that there is an improvement when using index
version 4. This is because the v3 index uses 108 MiB while the v4
index uses 80 MiB. Since the repeated portions of the directories are
very short (f3/f1/f2, for example) this ratio is less pronounced than in
similarly-sized real repositories.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This begins a long effort to update the index format to allow sparse
directory entries. This should result in a significant improvement to
Git commands when HEAD contains millions of files, but the user has
selected many fewer files to keep in their sparse-checkout definition.
Currently, the index format is only updated in the presence of
extensions.sparseIndex instead of increasing a file format version
number. This is temporary, and index v5 is part of the plan for future
work in this area.
The design document details many of the reasons for embarking on this
work, and also the plan for completing it safely.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the signature of read_tree_recursive() to omit the "base",
"baselen" and "stage" arguments. No callers of it use these parameters
for anything anymore.
The last function to call read_tree_recursive() with a non-"" path was
read_tree_recursive() itself, but that was changed in
ffd31f661d5 (Reimplement read_tree_recursive() using
tree_entry_interesting(), 2011-03-25).
The last user of the "stage" parameter went away in the last commit,
and even that use was mere boilerplate.
So let's remove those and rename the read_tree_recursive() function to
just read_tree(). We had another read_tree() function that I've
refactored away in preceding commits, since all in-tree users read
trees recursively with a callback we can change the name to signify
that this is the norm.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename the static read_tree_1() function to read_tree_at(). This
function works just like read_tree_recursive(), except you provide
your own strbuf.
This step doesn't make much sense now, but in follow-up commits I'll
remove the base/baselen/stage arguments to read_tree_recursive(). At
that point an anticipated in-tree user[1] for the old
read_tree_recursive() couldn't provide a path to start the
traversal.
Let's give them a function to do so with an API that makes more sense
for them, by taking a strbuf we should be able to avoid more casting
and/or reallocations in the future.
1. https://lore.kernel.org/git/xmqqft106sok.fsf@gitster.g
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "stage" variable being passed around in the archive code has only
ever been an elaborate way to hardcode the value "0".
This code was added in its original form in e4fbbfe9ecc (Add
git-zip-tree, 2006-08-26), at which point a hardcoded "0" would be
passed down through read_tree_recursive() to write_zip_entry().
It was then diligently added to the "struct directory" in
ed22b4173bd (archive: support filtering paths with glob, 2014-09-21),
but we were still not doing anything except passing it around as-is.
Let's stop doing that in the code internal to archive.c, we'll still
feed "0" to read_tree_recursive() itself, but won't use it. That we're
providing it at all to read_tree_recursive() will be changed in a
follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor away the read_tree() function into its only user,
overlay_tree_on_index().
First, change read_one_entry_opt() to use the strbuf parameter
read_tree_recursive() passes down in place. This finishes up a partial
refactoring started in 6a0b0b6de99 (tree.c: update read_tree_recursive
callback to pass strbuf as base, 2014-11-30).
Moving the rest into overlay_tree_on_index() makes this index juggling
we're doing easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that read_tree() has been moved to ls-files.c we can get rid of
the stage != 1 case that'll never happen.
Let's not use read_tree_recursive() as a pass-through to pass "stage =
1" either. For now we'll pass an unused "stage = 0" for consistency
with other read_tree_recursive() callers, that argument will be
removed in a follow-up commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the read_tree() API was added around the same time as
read_tree_recursive() in 94537c78a82 (Move "read_tree()" to
"tree.c"[...], 2005-04-22) and b12ec373b8e ([PATCH] Teach read-tree
about commit objects, 2005-04-20) things have gradually migrated over
to the read_tree_recursive() version.
Now builtin/ls-files.c is the last user of this code, let's move all
the relevant code there. This allows for subsequent simplification of
it, and an eventual move to read_tree_recursive().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests for "ls-files --with-tree". There was effectively no
coverage for any normal usage of this command, only the tests added in
54e1abce90e (Add test case for ls-files --with-tree, 2007-10-03) for
an obscure bug.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing tests for showing a tree with "git show". Let's test for
showing a tree, two trees, and that doing so doesn't recurse.
The only tests for this code added in 5d7eeee2ac6 (git-show: grok
blobs, trees and tags, too, 2006-12-14) were the tests in
t7701-repack-unpack-unreachable.sh added in ccc1297226b (repack:
modify behavior of -A option to leave unreferenced objects unpacked,
2008-05-09).
Let's add this common mode of operation to the "show" tests
themselves. It's more obvious, and the tests in
t7701-repack-unpack-unreachable.sh happily pass if we start buggily
emitting trees recursively.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were some early changes in the 2.31 cycle to optimize some setup
in diffcore-rename.c[1], some later changes to measure performance[2],
and finally some significant changes to improve rename detection
performance. The final one was merged with the note
Performance optimization work on the rename detection continues.
That works for the commit log, but feels misleading as a release note
since all the changes were within one cycle. Simplify this to just
Performance improvements for rename detection.
The former wording could be seen as hinting that more performance
improvements will come in 2.32, which is true, but we can just cover
those in the 2.32 release notes when the time comes.
[1] a5ac31b5b1 (Merge branch 'en/diffcore-rename', 2021-01-25)
[2] d3a035b055 (Merge branch 'en/merge-ort-perf', 2021-02-11)
[3] 12bd17521c (Merge branch 'en/diffcore-rename', 2021-03-01)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around platforms whose open() is reported to return EINTR (it
shouldn't, as we do our signals with SA_RESTART).
* jk/open-returns-eintr:
config.mak.uname: enable OPEN_RETURNS_EINTR for macOS Big Sur
Makefile: add OPEN_RETURNS_EINTR knob
This commit causes breakage on macOS, or in fact any platform using
older versions of Tcl. Revert it.
* py/revert-commit-comments:
Revert "git-gui: remove lines starting with the comment character"
This reverts commit b9a43869c9f96d3577d6f568c1bda1940c8f0e31.
This commit causes breakage on macOS (10.13). It causes errors on
startup and completely breaks the commit functionality. There are two
main problems. First, it uses `string cat` which is not supported on
older Tcl versions. Second, it does a half close of the bidirectional
pipe to git-stripspace which is also not supported on older Tcl
versions.
Reported-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Raise the buffer size used when writing the index file out from
(obviously too small) 8kB to (clearly sufficiently large) 128kB.
* ns/raise-write-index-buffer-size:
read-cache: make the index write buffer size 128K
The logic to handle "trailer" related placeholders in the
"--format=" mechanisms in the "log" family and "for-each-ref"
family is getting unified.
* hv/trailer-formatting:
ref-filter: use pretty.c logic for trailers
pretty.c: capture invalid trailer argument
pretty.c: refactor trailer logic to `format_set_trailers_options()`
t6300: use function to test trailer options
Test script modernization.
* sv/t7001-modernize:
t7001: use `test` rather than `[`
t7001: use here-docs instead of echo
t7001: put each command on a separate line
t7001: use '>' rather than 'touch'
t7001: avoid using `cd` outside of subshells
t7001: remove whitespace after redirect operators
t7001: modernize subshell formatting
t7001: remove unnecessary blank lines
t7001: indent with TABs instead of spaces
t7001: modernize test formatting
The approach to "fsck" the incoming objects in "index-pack" is
attractive for performance reasons (we have them already in core,
inflated and ready to be inspected), but fundamentally cannot be
applied fully when we receive more than one pack stream, as a tree
object in one pack may refer to a blob object in another pack as
".gitmodules", when we want to inspect blobs that are used as
".gitmodules" file, for example. Teach "index-pack" to emit
objects that must be inspected later and check them in the calling
"fetch-pack" process.
* jt/transfer-fsck-across-packs:
fetch-pack: print and use dangling .gitmodules
fetch-pack: with packfile URIs, use index-pack arg
http-fetch: allow custom index-pack args
http: allow custom index-pack args
The common code to deal with "chunked file format" that is shared
by the multi-pack-index and commit-graph files have been factored
out, to help codepaths for both filetypes to become more robust.
* ds/chunked-file-api:
commit-graph.c: display correct number of chunks when writing
chunk-format: add technical docs
chunk-format: restore duplicate chunk checks
midx: use 64-bit multiplication for chunk sizes
midx: use chunk-format read API
commit-graph: use chunk-format read API
chunk-format: create read chunk API
midx: use chunk-format API in write_midx_internal()
midx: drop chunk progress during write
midx: return success/failure in chunk write methods
midx: add num_large_offsets to write_midx_context
midx: add pack_perm to write_midx_context
midx: add entries to write_midx_context
midx: use context in write_midx_pack_names()
midx: rename pack_info to write_midx_context
commit-graph: use chunk-format write API
chunk-format: create chunk format write API
commit-graph: anonymize data in chunk_write_fn
Performance optimization work on the rename detection continues.
* en/diffcore-rename:
merge-ort: call diffcore_rename() directly
gitdiffcore doc: mention new preliminary step for rename detection
diffcore-rename: guide inexact rename detection based on basenames
diffcore-rename: complete find_basename_matches()
diffcore-rename: compute basenames of source and dest candidates
t4001: add a test comparing basename similarity and content similarity
diffcore-rename: filter rename_src list when possible
diffcore-rename: no point trying to find a match better than exact
Preliminary changes to fsmonitor integration.
* jh/fsmonitor-prework:
fsmonitor: refactor initialization of fsmonitor_last_update token
fsmonitor: allow all entries for a folder to be invalidated
fsmonitor: log FSMN token when reading and writing the index
fsmonitor: log invocation of FSMonitor hook to trace2
read-cache: log the number of scanned files to trace2
read-cache: log the number of lstat calls to trace2
preload-index: log the number of lstat calls to trace2
p7519: add trace logging during perf test
p7519: move watchman cleanup earlier in the test
p7519: fix watchman watch-list test on Windows
p7519: do not rely on "xargs -d" in test
This reverts commit c85eec7fc37e1ca79072f263ae6ea1ee305ba38c, as
it is a bit overzealous, we are in prerelease freeze, and we want
to have enough time to get this right and cook in 'next'.
cf. <8735xgkvuo.fsf@evledraar.gmail.com>
We've had mixed reports on whether the latest release of macOS needs
this Makefile knob set. In most reported cases, there's antivirus
software running (which one might imagine could cause an open() call to
be delayed). However, one of the (off-list) reports I've gotten
indicated that it happened on an otherwise clean install of Big Sur.
Since the symptom is so bad (checkout randomly fails to write several
fails when the progress meter kicks in), and since the workaround is so
lightweight (if we don't see EINTR, it's just an extra conditional
check), let's just turn it on by default.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some platforms, open() reportedly returns EINTR when opening regular
files and we receive a signal (usually SIGALRM from our progress meter).
This shouldn't happen, as open() should be a restartable syscall, and we
specify SA_RESTART when setting up the alarm handler. So it may actually
be a kernel or libc bug for this to happen. But it has been reported on
at least one version of Linux (on a network filesystem):
https://lore.kernel.org/git/c8061cce-71e4-17bd-a56a-a5fed93804da@neanderfunk.de/
as well as on macOS starting with Big Sur even on a regular filesystem.
We can work around it by retrying open() calls that get EINTR, just as
we do for read(), etc. Since we don't ever _want_ to interrupt an open()
call, we can get away with just redefining open, rather than insisting
all callsites use xopen().
We actually do have an xopen() wrapper already (and it even does this
retry, though there's no indication of it being an observed problem back
then; it seems simply to have been lifted from xread(), etc). But it is
used hardly anywhere, and isn't suitable for general use because it will
die() on error. In theory we could combine the two, but it's awkward to
do so because of the variable-args interface of open().
This patch adds a Makefile knob for enabling the workaround. It's not
enabled by default for any platforms in config.mak.uname yet, as we
don't have enough data to decide how common this is (I have not been
able to reproduce on either Linux or Big Sur myself). It may be worth
enabling preemptively anyway, since the cost is pretty low (if we don't
see an EINTR, it's just an extra conditional).
However, note that we must not enable this on Windows. It doesn't do
anything there, and the macro overrides the existing mingw_open()
redirection. I've added a preemptive #undef here in the mingw header
(which is processed first) to just quietly disable it (we could also
make it an #error, but there is little point in being so aggressive).
Reported-by: Aleksey Kliger <alklig@microsoft.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push $there --delete ''" should have been diagnosed as an
error, but instead turned into a matching push, which has been
corrected.
* jc/push-delete-nothing:
push: do not turn --delete '' into a matching push
A handful of multi-word configuration variable names in
documentation that are spelled in all lowercase have been corrected
to use the more canonical camelCase.
* dl/doc-config-camelcase:
index-format doc: camelCase core.excludesFile
blame-options.txt: camelcase blame.blankBoundary
i18n.txt: camel case and monospace "i18n.commitEncoding"
The "git maintenance register" command had trouble registering bare
repositories, which had been corrected.
* es/maintenance-of-bare-repositories:
maintenance: fix incorrect `maintenance.repo` path with bare repository
Various fixes on "git add --chmod".
* mt/add-chmod-fixes:
add: propagate --chmod errors to exit status
add: mark --chmod error string for translation
add --chmod: don't update index when --dry-run is used
The code to implement "git merge-base --independent" was poorly
done and was kept from the very beginning of the feature.
* ds/merge-base-independent:
commit-reach: stale commits may prune generation further
commit-reach: use heuristic in remove_redundant()
commit-reach: move compare_commits_by_gen
commit-reach: use one walk in remove_redundant()
commit-reach: reduce requirements for remove_redundant()
"git rebase --[no-]fork-point" gained a configuration variable
rebase.forkPoint so that users do not have to keep specifying a
non-default setting.
* ah/rebase-no-fork-point-config:
rebase: add a config option for --no-fork-point
"git grep" has been tweaked to be limited to the sparse checkout
paths.
* mt/grep-sparse-checkout:
grep: honor sparse-checkout on working tree searches
"git difftool" learned "--skip-to=<path>" option to restart an
interrupted session from an arbitrary path.
* zh/difftool-skip-to:
difftool.c: learn a new way start at specified file
"git {diff,log} --{skip,rotate}-to=<path>" allows the user to
discard diff output for early paths or move them to the end of the
output.
* jc/diffcore-rotate:
diff: --{rotate,skip}-to=<path>
