Signed commits and tags now allow verification of objects, whose
two object names (one in SHA-1, the other in SHA-256) are both
signed.
* bc/signed-objects-with-both-hashes:
gpg-interface: remove other signature headers before verifying
ref-filter: hoist signature parsing
commit: allow parsing arbitrary buffers with headers
gpg-interface: improve interface for parsing tags
commit: ignore additional signatures when parsing signed commits
ref-filter: switch some uses of unsigned long to size_t
Test to make sure "git rev-parse one-thing one-thing" gives
the same thing twice (when one-thing is --since=X).
* ew/rev-parse-since-test:
t1500: ensure current --since= behavior remains
Avoid individual tests in t5411 from getting affected by each other
by forcing them to use separate output files during the test.
* jx/t5411-unique-filenames:
t5411: refactor check of refs using test_cmp_refs
t5411: use different out file to prevent overwriting
Documentation, code and test clean-up around "git stash".
* dl/stash-cleanup:
stash: declare ref_stash as an array
t3905: use test_cmp() to check file contents
t3905: replace test -s with test_file_not_empty
t3905: remove nested git in command substitution
t3905: move all commands into test cases
t3905: remove spaces after redirect operators
git-stash.txt: be explicit about subcommand options
Save sizeof(const char *) bytes by declaring ref_stash as an array
instead of having a redundant pointer to an array.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modernize the script by doing file content comparisons using test_cmp()
instead of `test x = "$(cat file)"`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to modernize the test script, replace `test -s` with
test_file_not_empty(), which provides better diagnostic output in the
case of failure.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a git command in a nested command substitution fails, it will be
silently ignored since only the return code of the outer command
substitutions is reported. Factor out nested command substitutions so
that the error codes of those commands are reported.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to modernize the tests, move commands that currently run
outside of test cases into a test case. Where possible, clean up files
that are produced using test_when_finished() but in the case where files
persist over multiple test cases, create a new test case to perform
cleanup.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For shell scripts, the usual convention is for there to be no space
after redirection operators, (e.g. `>file`, not `> file`). Remove these
spaces wherever they appear.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the options for the `list` and `show` subcommands are just
listed as `<options>`. This seems to imply, from a cursory glance at the
summary, that they take the stash options listed below. However, reading
more carefully, we see that they take log options and diff options
respectively.
Make it more obvious that they take log and diff options by explicitly
stating this in the subcommand summary.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can sometimes be useful to see which refs are contributing to the
overall repository size (e.g., does some branch have a bunch of objects
not found elsewhere in history, which indicates that deleting it would
shrink the size of a clone).
You can find that out by generating a list of objects, getting their
sizes from cat-file, and then summing them, like:
git rev-list --objects --no-object-names main..branch
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
Though note that the caveats from git-cat-file(1) apply here. We "blame"
base objects more than their deltas, even though the relationship could
easily be flipped. Still, it can be a useful rough measure.
But one problem is that it's slow to run. Teaching rev-list to sum up
the sizes can be much faster for two reasons:
1. It skips all of the piping of object names and sizes.
2. If bitmaps are in use, for objects that are in the
bitmapped packfile we can skip the oid_object_info()
lookup entirely, and just ask the revindex for the
on-disk size.
This patch implements a --disk-usage option which produces the same
answer in a fraction of the time. Here are some timings using a clone of
torvalds/linux:
[rev-list piped to cat-file, no bitmaps]
$ time git rev-list --objects --no-object-names --all |
git cat-file --buffer --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m29.635s
user 0m38.003s
sys 0m1.093s
[internal, no bitmaps]
$ time git rev-list --disk-usage --objects --all
1459938510
real 0m31.262s
user 0m30.885s
sys 0m0.376s
Even though the wall-clock time is slightly worse due to parallelism,
notice the CPU savings between the two. We saved 21% of the CPU just by
avoiding the pipes.
But the real win is with bitmaps. If we use them without the new option:
[rev-list piped to cat-file, bitmaps]
$ time git rev-list --objects --no-object-names --all --use-bitmap-index |
git cat-file --batch-check='%(objectsize:disk)' |
perl -lne '$total += $_; END { print $total }'
1459938510
real 0m6.244s
user 0m8.452s
sys 0m0.311s
then we're faster to generate the list of objects, but we still spend a
lot of time piping and looking things up. But if we do both together:
[internal, bitmaps]
$ time git rev-list --disk-usage --objects --all --use-bitmap-index
1459938510
real 0m0.219s
user 0m0.169s
sys 0m0.049s
then we get the same answer much faster.
For "--all", that answer will correspond closely to "du objects/pack",
of course. But we're actually checking reachability here, so we're still
fast when we ask for more interesting things:
$ time git rev-list --disk-usage --use-bitmap-index v5.0..v5.10
374798628
real 0m0.429s
user 0m0.356s
sys 0m0.072s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a multiply signed commit, we need to remove the signature
in the header before verifying the object, since the trailing signature
will not be over both pieces of data. Do so, and verify that we
validate the signature appropriately.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we parse a signature in the ref-filter code, we continually
increment the buffer pointer. Hoist the signature parsing above the
blank line delimiting headers and body so we can find the signature when
using a header to sign the buffer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently only commits are signed with headers. However, in the future,
we'll also sign tags with headers as well. Let's refactor out a
function called parse_buffer_signed_by_header which does exactly that.
In addition, since we'll want to sign things other than commits this
way, let's call the function sign_with_header instead of do_sign_commit.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a function which parses a buffer with a signature at the end,
parse_signature, and this function is used for signed tags. However,
we'll need to store values for multiple algorithms, and we'll do this by
using a header for the non-default algorithm.
Adjust the parse_signature interface to store the parsed data in two
strbufs and turn the existing function into parse_signed_buffer. The
latter is still used in places where we know we always have a signed
buffer, such as push certs.
Adjust all the callers to deal with this new interface.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix "git fsck --name-objects" which apparently has not been used by
anybody who is motivated enough to report breakage.
* js/fsck-name-objects-fix:
fsck --name-objects: be more careful parsing generation numbers
t1450: robustify `remove_object()`
The .mailmap is documented to be read only from the root level of a
working tree, but a stray file in a bare repository also was read
by accident, which has been corrected.
* jk/mailmap-only-at-root:
mailmap: only look for .mailmap in work tree
"git grep --untracked" is meant to be "let's ALSO find in these
files on the filesystem" when looking for matches in the working
tree files, and does not make any sense if the primary search is
done against the index, or the tree objects. The "--cached" and
"--untracked" options have been marked as mutually incompatible.
* mt/grep-cached-untracked:
grep: error out if --untracked is used with --cached
The version of Ubuntu Linux used by default at GitHub Actions CI
has been updated to one that lack coccinelle; until it gets fixed,
work it around by sticking to the previous release (18.04).
* tb/ci-run-cocci-with-18.04:
.github/workflows/main.yml: run static-analysis on bionic
Get rid of "GETTEXT_POISON" support altogether, which may or may
not be controversial.
* ab/detox-gettext-tests:
tests: remove uses of GIT_TEST_GETTEXT_POISON=false
tests: remove support for GIT_TEST_GETTEXT_POISON
ci: remove GETTEXT_POISON jobs
Update support for invalid UTF-8 in PCRE2.
* ab/grep-pcre-invalid-utf8:
grep/pcre2: better support invalid UTF-8 haystacks
grep/pcre2 tests: don't rely on invalid UTF-8 data test
The support for deprecated PCRE1 library has been dropped.
* ab/retire-pcre1:
Remove support for v1 of the PCRE library
config.mak.uname: remove redundant NO_LIBPCRE1_JIT flag
Some pretty-format specifiers do not need the data in commit object
(e.g. "%H"), but we were over-eager to load and parse it, which has
been made even lazier.
* jk/pretty-lazy-load-commit:
pretty: lazy-load commit data when expanding user-format
Cleaning various codepaths up.
* ds/more-index-cleanups:
t1092: test interesting sparse-checkout scenarios
test-lib: test_region looks for trace2 regions
sparse-checkout: load sparse-checkout patterns
name-hash: use trace2 regions for init
repository: add repo reference to index_state
fsmonitor: de-duplicate BUG()s around dirty bits
cache-tree: extract subtree_pos()
cache-tree: simplify verify_cache() prototype
cache-tree: clean up cache_tree_update()
When "git rebase -i" processes "fixup" insn, there is no reason to
clean up the commit log message, but we did the usual stripspace
processing. This has been corrected.
* js/rebase-i-commit-cleanup-fix:
rebase -i: do leave commit message intact in fixup! chains
Code clean-up.
* jk/t0000-cleanups:
t0000: consistently use single quotes for outer tests
t0000: run cleaning test inside sub-test
t0000: run prereq tests inside sub-test
t0000: keep clean-up tests together
Lose the debugging aid that may have been useful in the past, but
no longer is, in the "grep" codepaths.
* ab/lose-grep-debug:
grep/log: remove hidden --debug and --grep-debug options
Code clean-up to ensure our use of hashtables using object names as
keys use the "struct object_id" objects, not the raw hash values.
* jk/use-oid-pos:
oid_pos(): access table through const pointers
hash_pos(): convert to oid_pos()
rerere: use strmap to store rerere directories
rerere: tighten rr-cache dirname check
rerere: check dirname format while iterating rr_cache directory
commit_graft_pos(): take an oid instead of a bare hash
This behavior of git-rev-parse is observed since git 1.8.3.1
at least(*), and likely earlier versions.
At least one git-reliant project in-the-wild relies on this
current behavior of git-rev-parse being able to handle multiple
--since= arguments without squeezing identical results together.
So add a test to prevent the potential for regression in
downstream projects.
(*) 1.8.3.1 the version packaged for CentOS 7.x
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to find a .mailmap file, we will always look for it in the
current directory. This makes sense in a repository with a working tree,
since we'd always go to the toplevel directory at startup. But for a
bare repository, it can be confusing. With an option like --git-dir (or
$GIT_DIR in the environment), we don't chdir at all, and we'd read
.mailmap from whatever directory you happened to be in before starting
Git.
(Note that --git-dir without specifying a working tree historically
means "the current directory is the root of the working tree", but most
bare repositories will have core.bare set these days, meaning they will
realize there is no working tree at all).
The documentation for gitmailmap(5) says:
If the file `.mailmap` exists at the toplevel of the repository[...]
which likewise reinforces the notion that we are looking in the working
tree.
This patch prevents us from looking for such a file when we're in a bare
repository. This does break something that used to work:
cd bare.git
git cat-file blob HEAD:.mailmap >.mailmap
git shortlog
But that was never advertised in the documentation. And these days we
have mailmap.blob (which defaults to HEAD:.mailmap) to do the same thing
in a much cleaner way.
However, there's one more interesting case: we might not have a
repository at all! The git-shortlog command can be run with git-log
output fed on its stdin, and it will apply the mailmap. In that case, it
probably does make sense to read .mailmap from the current directory.
This patch will continue to do so.
That leads to one even weirder case: if you run git-shortlog to process
stdin, the input _could_ be from a different repository entirely. Should
we respect the in-tree .mailmap then? Probably yes. Whatever the source
of the input, if shortlog is running in a repository, the documentation
claims that we'd read the .mailmap from its top-level (and of course
it's reasonably likely that it _is_ from the same repo, and the user
just preferred to run git-log and git-shortlog separately for whatever
reason).
The included test covers these cases, and we now document the "no repo"
case explicitly.
We also add a test that confirms we find a top-level ".mailmap" even
when we start in a subdirectory of the working tree. This worked both
before and after this commit, but we never tested it explicitly (it
works because we always chdir to the top-level of the working tree if
there is one).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 7b35efd734 (fsck_walk(): optionally name objects on the go,
2016-07-17), the `fsck` machinery learned to optionally name the
objects, so that it is easier to see what part of the repository is in a
bad shape, say, when objects are missing.
To save on complexity, this machinery uses a parser to determine the
name of a parent given a commit's name: any `~<n>` suffix is parsed and
the parent's name is formed from the prefix together with `~<n+1>`.
However, this parser has a bug: if it finds a suffix `<n>` that is _not_
`~<n>`, it will mistake the empty string for the prefix and `<n>` for
the generation number. In other words, it will generate a name of the
form `~<bogus-number>`.
Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function can be simplified by using the `test_oid_to_path()`
helper, which incidentally also makes it more robust by not relying on
the exact file system layout of the loose object files.
While at it, do not define those functions in a test case, it buys us
nothing.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the 'maintenance.strategy' config option is set to 'incremental',
a default maintenance schedule is enabled. Add the 'pack-refs' task to
that strategy at the weekly cadence.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is valuable to collect loose refs into a more compressed form. This
is typically the packed-refs file, although this could be the reftable
in the future. Having packed refs can be extremely valuable in repos
with many tags or remote branches that are not modified by the local
user, but still are necessary for other queries.
For instance, with many exploded refs, commands such as
git describe --tags --exact-match HEAD
can be very slow (multiple seconds). This command in particular is used
by terminal prompts to show when a detatched HEAD is pointing to an
existing tag, so having it be slow causes significant delays for users.
Add a new 'pack-refs' maintenance task. It runs 'git pack-refs --all
--prune' to move loose refs into a packed form. For now, that is the
packed-refs file, but could adjust to other file formats in the future.
This is the first of several sub-tasks of the 'gc' task that could be
extracted to their own tasks. In this process, we should not change the
behavior of the 'gc' task since that remains the default way to keep
repositories maintained. Creating a new task for one of these sub-tasks
only provides more customization options for those choosing to not use
the 'gc' task. It is certainly possible to have both the 'gc' and
'pack-refs' tasks enabled and run regularly. While they may repeat
effort, they do not conflict in a destructive way.
The 'auto_condition' function pointer is left NULL for now. We could
extend this in the future to have a condition check if pack-refs should
be run during 'git maintenance run --auto'.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version of Ubuntu Linux used by default at GitHub Actions CI
has been updated to one that lack coccinelle; until it gets fixed,
work it around by sticking to the previous release (18.04).
* tb/ci-run-cocci-with-18.04:
.github/workflows/main.yml: run static-analysis on bionic
"git mergetool" feeds three versions (base, local and remote) of
a conflicted path unmodified. The command learned to optionally
prepare these files with unconflicted parts already resolved.
* sh/mergetool-hideresolved:
mergetool: add per-tool support and overrides for the hideResolved flag
mergetool: break setup_tool out into separate initialization function
mergetool: add hideResolved configuration
Even though invocations of "die()" were logged to the trace2
system, "BUG()"s were not, which has been corrected.
* jt/trace2-BUG:
usage: trace2 BUG() invocations
die() messages are traced in trace2, but BUG() messages are not. Anyone
tracking die() messages would have even more reason to track BUG().
Therefore, write to trace2 when BUG() is invoked.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a per-tool override flag so that users may enable the flag for one
tool and disable it for another by setting
`mergetool.<tool>.hideResolved` to `false`.
In addition, the author or maintainer of a mergetool may optionally
override the default `hideResolved` value for that mergetool. If the
`mergetools/<tool>` shell script contains a `hide_resolved_enabled`
function it will be called when the mergetool is invoked and the return
value will be used as the default for the `hideResolved` flag.
hide_resolved_enabled () {
return 1
}
Disabling may be desirable if the mergetool wants or needs access to the
original, unmodified 'LOCAL' and 'REMOTE' versions of the conflicted
file. For example:
- A tool may use a custom conflict resolution algorithm and prefer to
ignore the results of Git's conflict resolution.
- A tool may want to visually compare/constrast the version of the file
from before the merge (saved to 'LOCAL', 'REMOTE', and 'BASE') with
Git's conflict resolution results (saved to 'MERGED').
Helped-by: Johannes Sixt <j6t@kdbg.org>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is preparation for the following commit where we need to source the
mergetool shell script to look for overrides before `run_merge_tool` is
called. Previously `run_merge_tool` both sourced that script and invoked
the mergetool.
In the case of the following commit, we need the result of the
`hide_resolved` override, if present, before we actually run
`run_merge_tool`.
The new `initialize_merge_tool` wrapper is exposed and documented as
a public interface for consistency with the existing `run_merge_tool`
which is also public. Although `setup_tool` could instead be exposed
directly, the related `setup_user_tool` would probably also want to be
elevated to match and this felt the cleanest to me.
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The purpose of a mergetool is to help the user resolve any conflicts
that Git cannot automatically resolve. If there is a conflict that must
be resolved manually Git will write a file named MERGED which contains
everything Git was able to resolve by itself and also everything that it
was not able to resolve wrapped in conflict markers.
One way to think of MERGED is as a two- or three-way diff. If each
"side" of the conflict markers is separately extracted an external tool
can represent those conflicts as a side-by-side diff.
However many mergetools instead diff LOCAL and REMOTE both of which
contain versions of the file from before the merge. Since the conflicts
Git resolved automatically are not present it forces the user to
manually re-resolve those conflicts. Some mergetools also show MERGED
but often only for reference and not as the focal point to resolve the
conflicts.
This adds a `mergetool.hideResolved` flag that will overwrite LOCAL and
REMOTE with each corresponding "side" of a conflicted file and thus hide
all conflicts that Git was able to resolve itself. Overwriting these
files will immediately benefit any mergetool that uses them without
requiring any changes to the tool.
No adverse effects were noted in a small survey of popular mergetools[1]
so this behavior defaults to `true`. However it can be globally disabled
by setting `mergetool.hideResolved` to `false`.
[1] https://www.eseth.org/2020/mergetools.htmlc884424769/2020/mergetools.md
Original-implementation-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Seth House <seth@eseth.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the conveniences that test_commit offers is making a tag for each
commit. This makes it easy to refer to the commits in subsequent
commands. But it can also be a pain if you care about reachability,
because those tags keep the commits reachable even if they are rewound
from the branch they're made on.
The alternative is that scripts have to call test_tick, git-add, and
git-commit themselves. Let's add a --no-tag option to give them the
one-liner convenience of using test_commit.
This is in preparation for the next patch, which will add some more
calls. But I cleaned up an existing site to show off the feature. There
are probably more cleanups possible.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano
Denton Liu
Jeff King
brian m. carlson
Eric Wong
Johannes Schindelin
Derrick Stolee
Jonathan Tan
Seth House