During unstaging we can simplify the way we perform the output by
combining our four puts into a single call.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The list of states which are valid for update-index were a little
too verbose and fed a few too many cases to the program. We can
do better with less lines of code by using more pattern matching,
and since we already were globbing here there's little change in
runtime cost.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We can revert any file which has a valid stage 0 (is not unmerged)
and which is has a working directory status of M or D. This vastly
simplifies our pattern matching on file status when building up the
list of files to perform a checkout-index against.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than relying on the file state and just inverting it, we should
look at which file icon the user clicked on. If they clicked on the
one in the "Changes To Be Committed" list then they want to unstage
the file. If they clicked on the icon in the "Changed But Not Updated"
list then they want to add the file to the commit. This should be much
more reliable about capturing the user's intent then looking at the file
state.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that core Git refers to resetting paths in the index as "unstaging"
the paths we should do the same in git-gui, both internally in our code
and also within the menu action name. The same follows for our staging
logic, as core Git refers to this as 'add'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Updated the state descriptions for individual file states to try and
make them more closely align with what git-runstatus might display.
This way a user who is reading Git documentation will be less confused
by our descriptions.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The DM state cannot really happen. Its implying that the file has
been deleted in the index, but the file in the working directory has
been modified relative to the file in the index. This is complete
nonsense, the file doesn't exist in the index for it to be different
against!
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently my earlier suspicion that the file state DD was a bug was
correct. A file which has been deleted from the working directory and
from the index will always get the state of D_ during a rescan. Thus
the only valid state for this to have is D_. We should always use only
D_ internally during our state changes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a rather drastic change to the git-gui user interface, but it
doesn't really look any different yet. I've taken the two lists and
converted them to being "changes to be committed" and "changed but
not updated". These lists correspond to the same lists output by
git-runstatus based on how files differ in the HEAD<->index and the
index<->working directory comparsions it performs.
This change is meant to correlate with the change in Git 1.5.0 where
we have brought the index more into the foreground and are trying to
teach users to make use of it as part of their daily operations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm going to refactor the way file status information gets displayed
so it more closely aligns with the way 'git-runstatus' displays the
differences between HEAD<->index and index<->working directory. To
that end the other file list is going to be changed to be the working
directory difference. So this change renames it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has many git-gui icons it may be confusing when they
start one which git-gui is still coming up. So on the windows
systems we now include an echo statement which displays the full
pathname of the working directory we are trying to enter into.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we usually say "Operation... please wait..." we should do
the same thing when starting gitk.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because it is such a common idiom to use [gitdir] along with [file join]
to locate the path of an item within the .git directory of the current
repository we might as well allow gitdir to act as a wrapper for the
file join operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The gitdir global variable is essentially read-only, and is used rather
frequently. So are appname and reponame. Needing to constantly declare
'global appname' just so we can access the value as $appname is downright
annoying and redundant. So instead I'm declaring these as procedures and
changing all uses to invoke the procedure rather than access the global
directly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We use reponame in a number of locations, and every time its always the
same value. Instead of computing this multiple times with code that was
copied and pasted around we can compute it once immediately after the
global gitdir has been computed and set.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users often forget to repack their object database, then start to
complain about how slow it is to perform common operations after
they have collected thousands of loose objects in their objects
directory. A simple repack usually restores performance.
During startup git-gui now asks git-count-objects how many loose
objects exist, and if this number exceeds a hardcoded threshold
we suggest that the user compress the database (aka run 'git gc')
at this time. I've hardcoded this to 2000 objects on non-Windows
systems as there the filesystems tend to handle the ~8 objects
per directory just fine. On Windows NTFS and FAT are just so slow
that we really start to lag when more than 200 loose objects exist,
so the hardcoded threshold is much lower there.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I really hate that I have this specialized hack within git-gui, but
its here. The hack shouldn't be offered unless miga's required .pvcsrc
file is in the top level of the repository's working directory. If
this file is missing miga will fail to startup properly, and the user
cannot wouldn't be able to use it within this directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a user wants to report an issue they will likely want to include
the version number with their issue report. This may be difficult
to enter if the version number includes an abbreviated commit SHA1
on the end of it. So we now give the user a context menu option
on the version box which allows them to copy all of the relevant
version data to the clipboard, ready for pasting into a report.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm stealing the exact logic used by core Git within its own Makefile to
setup the version number within scripts and executables. This way we
can be sure that the version number is always updated after a commit,
and that the version number also reflects when it is coming from a dirty
working directory (and is thus pretty worthless).
I've cleaned up some of the version display code in the about dialog too.
There were simply too many blank lines in the bottom section where we
showed the version data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We're a true GPL program, and we're interactive. We should show the
entire GPL notice and disclaimer of warranty in our about dialog upon
request by the user, as well as include it in the header of our source.
Perhaps overkill, but is recommended by our license.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we know what version git-gui is, the about dialog should
display it to the end-user. This way users can find out what version
they have before they report a problem or request a feature.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We want to embed the version of git-gui directly into the script file,
so that we can display it properly in the about dialog. Consequently
I've refactored the Makefile process to act like the one in core git.git
with regards to shell scripts, allowing git-gui to be constructed by a
sed replacement performed on git-gui.sh.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The user really doesn't need to see the technical details of how we
launch git-gui from within their "desktop icon". Instead we should hide
the command line from being displayed when the icon launches by putting
@ at the start of the line. If they really need to see the command we
are running they can edit the batch file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I just found a whole slew of places where we still were using the term
'include' rather than 'add' to refer to the act of updating the index
with modifications from the working directory. To be consistent with
all Git documentation and command line tools, these should be 'add'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There appears to be a bug on one of my test systems where cygpath with
the --long-name option is generating a corrupt string that does not
actually refer to sh.exe. This breaks any desktop icon created by
git-gui as the executable we are trying to invoke does not exist.
Since Cygwin is typically installed as C:\cygwin long path names is
probably not actually necessary to link to the shell.
I also added a small echo to the start of the icon script, as it can
take one of my test systems several seconds to startup git-gui. This
way the user knows we're starting git-gui, and was politely asked to
wait for the action to complete.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We no longer describe updating the index as including changes, as we
now use the add notation used by core Git's command line tools. So
its confusing to be talking about unincluded changes within the revert
dialog. Instead we should used language like 'unadded changes'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently I did not account for the D_ file state. This can occur when
a file has been marked for deletion by deleting it from the index, and
the file also does not exist in the working directory. Typically this
happens when the user deletes the file, hits Rescan, then includes the
missing file in the commit, then hits Rescan again. We don't find the
file in the working directory but its been removed in the index, so the
state becomes D_.
This state should be identical with DD. I'm not entirely sure why DD
occurs sometimes and D_ others, it would seem like D_ is the state that
should be happening instead of DD, leading me to believe there is a quirk
in git-gui's state manipulation code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git 1.5.0-rc1 and later has a 'git gc' command which performs
all important repository management activites (including reflog pruning,
repacking local objects, unnecessary loose object pruning and rerere cache
expiration) we should run 'gc' when the user wants us to cleanup their
object database for them.
I think the name 'gc' is horrible for a GUI application like git-gui,
so I'm labeling the menu action 'Compress Database' instead. Hopefully
this will provide some clue to the user about what the action does.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Loop through every remote.<name>.fetch entry and add it as a valid
option in the Pull menu. This way users can pull any remote branch
that they track, without needing to leave the gui. Its a rather crude
work around for not having a full merge interface.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In one particular case I have a tool called 'miga' which users may need
to invoke on their repository. This is a homegrown tool which is not
(and should be) part of git-gui, but I still want to be able to run it
from within the gui.
Right now I'm taking a shortcut and adding it to the Tools menu if
we are not on Mac OS X and the support script used to launch the tool
exists in the local filesystem. This is nothing but a complete and
utter hack.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git-add is a first class citizen in core Git (Nico's 366bfcb6)
users may start to expect the term 'add' to refer to the act of including
a file's changes into a commit. So I'm replacing all uses of the term
'Include' in the UI with 'Add'.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has partial includes disabled then it doesn't matter what
state the working directory is in; if the file has been included in
the next commit its index state is A or M and we should immediately
run update-index on the working directory file to bring the index in
sync with the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a file has a merge conflict (index state = U) the user will need to
run update-index on that file to resolve all stages down to stage 0,
by including the file in the working directory.
Like core Git we'll just trust the user that their resolution is
correct, and that they didn't just include the file into the commit
while merge conflicts still exist within the file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This implementation of switch_branch is not yet finished, and thus
it throws a "NOT FINISHED" error rather than completing the switch.
But its a rough sketch of the procedure required.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since this list is really the set of refs which match "refs/heads/*" it
really is the set of heads and not necessarily the set of all branches,
as the remote tracking branches are not listed in this set, even if it
appears in the "refs/heads/*" namespace (e.g. an old style repository).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since the user should not work on a tracking branch we automatically
hide any branch which is used as a tracking branch by either a
remote.<name>.fetch config entry or by a Pull: line in a remotes file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm not currently ready to implement branch switching, so I'm just
going to punt on it for now. :-)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Even though the user shouldn't have a remote branch checked out, if
they do we should still show as short of the branch name as possible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is an early start at branch management from within git-gui. The
branch menu has create/delete command entries to create and delete
branches as well as a list of radiobutton entries for each branch
found in the repository through for-each-ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently I missed the file state MD, which is a file modified and
updated in the index but then removed from the working directory. This
should be treated just like AD, an added file which has been deleted from
the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users want to know what branch they are sitting on before making a commit,
as they may need to switch to a different branch first.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Users sometimes need to be able to throw away locally modified files
in order to go back to the last committed version of that file. To
perform a revert the user must first uninclude each file from the new
commit as the working file must at least partially match the index,
and we use git-checkout-index to update the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Just like prior to a commit its only an informational message that
we refuse to perform a pull on a dirty working directory. Therefore
we should not use an error icon.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since gitk is currently broken on Mac OS X and is unable to start itself
when given command line parameters just don't offer the "Visual All
Branches" menu option on Mac OS X.
Once this feature of gitk is fixed we should change this section of code
to make sure a working version of gitk will be executed before we offer
the option up to the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes its useful to start gitk with the --all option, to view all of
the known branches and tags within this repository. Rather than making
the user startup gitk and then edit the view we can pass the option along
for them.
This also makes it slightly more explicit, that when gitk starts up by
default its showing the current branch and not everything. Yes gitk
isn't showing that to the user, but the fact that the user had to make
a decision between seeing this current branch or all branches will
hopefully make them study gitk's display before jumping to a conclusion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
