It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our put_be32() routine and its variants (get_be32(), put_be64(), etc)
has two implementations: on some platforms we cast memory in place and
use nothl()/htonl(), which can cause unaligned memory access. And on
others, we pick out the individual bytes using bitshifts.
This introduces extra complexity, and sometimes causes compilers to
generate warnings about type-punning. And it's not clear there's any
performance advantage.
This split goes back to 660231aa97 (block-sha1: support for
architectures with memory alignment restrictions, 2009-08-12). The
unaligned versions were part of the original block-sha1 code in
d7c208a92e (Add new optimized C 'block-sha1' routines, 2009-08-05),
which says it is:
Based on the mozilla SHA1 routine, but doing the input data accesses a
word at a time and with 'htonl()' instead of loading bytes and shifting.
Back then, Linus provided timings versus the mozilla code which showed a
27% improvement:
https://lore.kernel.org/git/alpine.LFD.2.01.0908051545000.3390@localhost.localdomain/
However, the unaligned loads were either not the useful part of that
speedup, or perhaps compilers and processors have changed since then.
Here are times for computing the sha1 of 4GB of random data, with and
without -DNO_UNALIGNED_LOADS (and BLK_SHA1=1, of course). This is with
gcc 10, -O2, and the processor is a Core i9-9880H.
[stock]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 6.638 s ± 0.081 s [User: 6.269 s, System: 0.368 s]
Range (min … max): 6.550 s … 6.841 s 10 runs
[-DNO_UNALIGNED_LOADS]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 6.418 s ± 0.015 s [User: 6.058 s, System: 0.360 s]
Range (min … max): 6.394 s … 6.447 s 10 runs
And here's the same test run on an AMD A8-7600, using gcc 8.
[stock]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 11.721 s ± 0.113 s [User: 10.761 s, System: 0.951 s]
Range (min … max): 11.509 s … 11.861 s 10 runs
[-DNO_UNALIGNED_LOADS]
Benchmark #1: t/helper/test-tool sha1 <foo.rand
Time (mean ± σ): 11.744 s ± 0.066 s [User: 10.807 s, System: 0.928 s]
Range (min … max): 11.637 s … 11.863 s 10 runs
So the unaligned loads don't seem to help much, and actually make things
worse. It's possible there are platforms where they provide more
benefit, but:
- the non-x86 platforms for which we use this code are old and obscure
(powerpc and s390).
- the main caller that cares about performance is block-sha1. But
these days it is rarely used anyway, in favor of sha1dc (which is
already much slower, and nobody seems to have cared that much).
Let's just drop unaligned versions entirely in the name of simplicity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"format-patch --range-diff=<prev> <origin>..HEAD" has been taught
not to ignore <origin> when <prev> is a single version.
* es/format-patch-interdiff-cleanup:
format-patch: use 'origin' as start of current-series-range when known
diff-lib: tighten show_interdiff()'s interface
diff: move show_interdiff() from its own file to diff-lib
For a long time already, the non-dashed form of the built-ins is the
recommended way to write scripts, i.e. it is better to call `git merge
[...]` than to call `git-merge [...]`.
While Git still supports the dashed form (by hard-linking the `git`
executable to the dashed name in `libexec/git-core/`), in practice, it
is probably almost irrelevant.
However, we *do* care about keeping people's scripts working (even if
they were written before the non-dashed form started to be recommended).
Keeping this backwards-compatibility is not necessarily cheap, though:
even so much as amending the tip commit in a git.git checkout will
require re-linking all of those dashed commands. On this developer's
laptop, this makes a noticeable difference:
$ touch version.c && time make
CC version.o
AR libgit.a
LINK git-bugreport.exe
[... 11 similar lines ...]
LN/CP git-remote-https.exe
LN/CP git-remote-ftp.exe
LN/CP git-remote-ftps.exe
LINK git.exe
BUILTIN git-add.exe
[... 123 similar lines ...]
BUILTIN all
SUBDIR git-gui
SUBDIR gitk-git
SUBDIR templates
LINK t/helper/test-fake-ssh.exe
LINK t/helper/test-line-buffer.exe
LINK t/helper/test-svn-fe.exe
LINK t/helper/test-tool.exe
real 0m36.633s
user 0m3.794s
sys 0m14.141s
$ touch version.c && time make SKIP_DASHED_BUILT_INS=1
CC version.o
AR libgit.a
LINK git-bugreport.exe
[... 11 similar lines ...]
LN/CP git-remote-https.exe
LN/CP git-remote-ftp.exe
LN/CP git-remote-ftps.exe
LINK git.exe
BUILTIN git-receive-pack.exe
BUILTIN git-upload-archive.exe
BUILTIN git-upload-pack.exe
BUILTIN all
SUBDIR git-gui
SUBDIR gitk-git
SUBDIR templates
LINK t/helper/test-fake-ssh.exe
LINK t/helper/test-line-buffer.exe
LINK t/helper/test-svn-fe.exe
LINK t/helper/test-tool.exe
real 0m23.717s
user 0m1.562s
sys 0m5.210s
Also, `.zip` files do not have any standardized support for hard-links,
therefore "zipping up" the executables will result in inflated disk
usage. (To keep down the size of the "MinGit" variant of Git for
Windows, which is distributed as a `.zip` file, the hard-links are
excluded specifically.)
In addition to that, some programs that are regularly used to assess
disk usage fail to realize that those are hard-links, and heavily
overcount disk usage. Most notably, this was the case with Windows
Explorer up until the last couple of Windows 10 versions. See e.g.
https://github.com/msysgit/msysgit/issues/58.
To save on the time needed to hard-link these dashed commands, with the
plan to eventually stop shipping with those hard-links on Windows, let's
introduce a Makefile knob to skip generating them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a hard-coded list of `.pdb` files to copy. But we are about to
introduce the `SKIP_DASHED_BUILT_INS` knob in the `Makefile`, which
might make this hard-coded list incorrect.
Let's switch to a dynamically-generated list instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add untracked files for the dist target directly using git archive
instead of calling tar cr to append them. This reduces the dependency
on external tools and gives the untracked files the same access times
and user information as tracked ones, integrating them seamlessly.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow maintainers to tweak $(TAR) invocations done while making
distribution tarballs.
* jc/dist-tarball-tweak:
Makefile: allow extra tweaking of distribution tarball
When set in the environment, GIT_TRACE_REFS makes git print operations and
results as they flow through the ref storage backend. This helps debug
discrepancies between different ref backends.
Example:
$ GIT_TRACE_REFS="1" ./git branch
15:42:09.769631 refs/debug.c:26 ref_store for .git
15:42:09.769681 refs/debug.c:249 read_raw_ref: HEAD: 0000000000000000000000000000000000000000 (=> refs/heads/ref-debug) type 1: 0
15:42:09.769695 refs/debug.c:249 read_raw_ref: refs/heads/ref-debug: 3a238e539b (=> refs/heads/ref-debug) type 0: 0
15:42:09.770282 refs/debug.c:233 ref_iterator_begin: refs/heads/ (0x1)
15:42:09.770290 refs/debug.c:189 iterator_advance: refs/heads/b4 (0)
15:42:09.770295 refs/debug.c:189 iterator_advance: refs/heads/branch3 (0)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The maintainer's dist rules are used to produce distribution
tarballs. They use "$(TAR) cf" and "$(TAR) rf" to produce archives
out of a freshly created local installation area, which means that
the built product can be affected by maintainer's umask and other
local environment.
Implementations of "tar" have ways (implementation specific,
unfortunately) to force permission bits and other stuff to allow the
user to hide these effects coming from the local environment. Teach
our Makefile to allow the maintainer to tweak the invocation of the
$(TAR) commands by setting TAR_DIST_EXTRA_OPTS.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
show_interdiff() is a relatively small function and not likely to grow
larger or more complicated. Rather than dedicating an entire source file
to it, relocate it to diff-lib.c which houses other "take two things and
compare them" functions meant to be re-used but not so low-level as to
reside in the core diff implementation.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tools based on LibClang [1] can make use of a 'JSON Compilation
Database' [2] that keeps track of the exact options used to compile a set
of source files.
For example, clangd [3], which is a C language server protocol
implementation, can use a JSON compilation database to determine the
flags needed to compile a file so it can provide proper editor
integration. As a result, editors supporting the language server
protocol (such as VS Code, Emacs, or Vim, with suitable plugins) can
provide better searching, integration, and refactoring tools.
The Clang compiler can generate JSON fragments when compiling [4],
using the `-MJ` flag. These JSON fragments (one per compiled source
file) can then be concatenated to create the compilation database,
commonly called 'compile_commands.json'.
Add support to the Makefile for generating these JSON fragments as well
as the compilation database itself, if the environment variable
'GENERATE_COMPILATION_DATABASE' is set.
If this variable is set, check that $(CC) indeed supports the `-MJ`
flag, following what is done for automatic dependencies.
All JSON fragments are placed in the 'compile_commands/' directory, and
the compilation database 'compile_commands.json' is generated as a
dependency of the 'all' target using a `sed` invocation.
[1] https://clang.llvm.org/docs/Tooling.html
[2] https://clang.llvm.org/docs/JSONCompilationDatabase.html
[3] https://clangd.llvm.org/
[4] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-mj-arg
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates to on-demand fetching code in lazily cloned repositories.
* jt/lazy-fetch:
fetch: no FETCH_HEAD display if --no-write-fetch-head
fetch-pack: remove no_dependents code
promisor-remote: lazy-fetch objects in subprocess
fetch-pack: do not lazy-fetch during ref iteration
fetch: only populate existing_refs if needed
fetch: avoid reading submodule config until needed
fetch: allow refspecs specified through stdin
negotiator/noop: add noop fetch negotiator
Git calls an internal `execute_commands` function to handle commands
sent from client to `git-receive-pack`. Regardless of what references
the user pushes, git creates or updates the corresponding references if
the user has write-permission. A contributor who has no
write-permission, cannot push to the repository directly. So, the
contributor has to write commits to an alternate location, and sends
pull request by emails or by other ways. We call this workflow as a
distributed workflow.
It would be more convenient to work in a centralized workflow like what
Gerrit provided for some cases. For example, a read-only user who
cannot push to a branch directly can run the following `git push`
command to push commits to a pseudo reference (has a prefix "refs/for/",
not "refs/heads/") to create a code review.
git push origin \
HEAD:refs/for/<branch-name>/<session>
The `<branch-name>` in the above example can be as simple as "master",
or a more complicated branch name like "foo/bar". The `<session>` in
the above example command can be the local branch name of the client
side, such as "my/topic".
We cannot implement a centralized workflow elegantly by using
"pre-receive" + "post-receive", because Git will call the internal
function "execute_commands" to create references (even the special
pseudo reference) between these two hooks. Even though we can delete
the temporarily created pseudo reference via the "post-receive" hook,
having a temporary reference is not safe for concurrent pushes.
So, add a filter and a new handler to support this kind of workflow.
The filter will check the prefix of the reference name, and if the
command has a special reference name, the filter will turn a specific
field (`run_proc_receive`) on for the command. Commands with this filed
turned on will be executed by a new handler (a hook named
"proc-receive") instead of the internal `execute_commands` function.
We can use this "proc-receive" command to create pull requests or send
emails for code review.
Suggested by Junio, this "proc-receive" hook reads the commands,
push-options (optional), and send result using a protocol in pkt-line
format. In the following example, the letter "S" stands for
"receive-pack" and letter "H" stands for the hook.
# Version and features negotiation.
S: PKT-LINE(version=1\0push-options atomic...)
S: flush-pkt
H: PKT-LINE(version=1\0push-options...)
H: flush-pkt
# Send commands from server to the hook.
S: PKT-LINE(<old-oid> <new-oid> <ref>)
S: ... ...
S: flush-pkt
# Send push-options only if the 'push-options' feature is enabled.
S: PKT-LINE(push-option)
S: ... ...
S: flush-pkt
# Receive result from the hook.
# OK, run this command successfully.
H: PKT-LINE(ok <ref>)
# NO, I reject it.
H: PKT-LINE(ng <ref> <reason>)
# Fall through, let 'receive-pack' to execute it.
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option fall-through)
# OK, but has an alternate reference. The alternate reference name
# and other status can be given in options
H: PKT-LINE(ok <ref>)
H: PKT-LINE(option refname <refname>)
H: PKT-LINE(option old-oid <old-oid>)
H: PKT-LINE(option new-oid <new-oid>)
H: PKT-LINE(option forced-update)
H: ... ...
H: flush-pkt
After receiving a command, the hook will execute the command, and may
create/update different reference. For example, a command for a pseudo
reference "refs/for/master/topic" may create/update different reference
such as "refs/pull/123/head". The alternate reference name and other
status are given in option lines.
The list of commands returned from "proc-receive" will replace the
relevant commands that are sent from user to "receive-pack", and
"receive-pack" will continue to run the "execute_commands" function and
other routines. Finally, the result of the execution of these commands
will be reported to end user.
The reporting function from "receive-pack" to "send-pack" will be
extended in latter commit just like what the "proc-receive" hook reports
to "receive-pack".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a noop fetch negotiator. This is introduced to allow partial clones
to skip the unneeded negotiation step when fetching missing objects
using a "git fetch" subprocess. (The implementation of spawning a "git
fetch" subprocess will be done in a subsequent patch.) But this can also
be useful for end users, e.g. as a blunt fix for object corruption.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code in vcs-svn was started in 2010 as an attempt to build a
remote-helper for interacting with svn repositories (as opposed to
git-svn). However, we never got as far as shipping a mature remote
helper, and the last substantive commit was e99d012a6b in 2012.
We do have a git-remote-testsvn, and it is even installed as part of
"make install". But given the name, it seems unlikely to be used by
anybody (you'd have to explicitly "git clone testsvn::$url", and there
have been zero mentions of that on the mailing list since 2013, and even
that includes the phrase "you might need to hack a bit to get it working
properly"[1]).
We also ship contrib/svn-fe, which builds on the vcs-svn work. However,
it does not seem to build out of the box for me, as the link step misses
some required libraries for using libgit.a. Curiously, the original
build breakage bisects for me to eff80a9fd9 (Allow custom "comment
char", 2013-01-16), which seems unrelated. There was an attempt to fix
it in da011cb0e7 (contrib/svn-fe: fix Makefile, 2014-08-28), but on my
system that only switches the error message.
So it seems like the result is not really usable by anybody in practice.
It would be wonderful if somebody wanted to pick up the topic again, and
potentially it's worth carrying around for that reason. But the flip
side is that people doing tree-wide operations have to deal with this
code. And you can see the list with (replace "HEAD" with this commit as
appropriate):
{
echo "--"
git diff-tree --diff-filter=D -r --name-only HEAD^ HEAD
} |
git log --no-merges --oneline e99d012a6bc.. --stdin
which shows 58 times somebody had to deal with the code, generally due
to a compile or test failure, or a tree-wide style fix or API change.
Let's drop it and let anybody who wants to pick it up do so by
resurrecting it from the git history.
As a bonus, this also reduces the size of a stripped installation of Git
from 21MB to 19MB.
[1] https://lore.kernel.org/git/CALkWK0mPHzKfzFKKpZkfAus3YVC9NFYDbFnt+5JQYVKipk3bQQ@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason that git-fast-import benefits from being a separate
binary. And as it links against libgit.a, it has a non-trivial disk
footprint. Let's make it a builtin, which reduces the size of a stripped
installation from 22MB to 21MB.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason that bugreport has to be a separate binary. And since
it links against libgit.a, it has a rather large disk footprint. Let's
make it a builtin, which reduces the size of a stripped installation
from 24MB to 22MB.
This also simplifies our Makefile a bit. And we can take advantage of
builtin niceties like RUN_SETUP_GENTLY.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no real reason for credential helpers to be separate binaries. I
did them this way originally under the notion that helper don't _need_
to be part of Git, and so can be built totally separately (and indeed,
the ones in contrib/credential are). But the ones in our main Makefile
build on libgit.a, and the resulting binaries are reasonably large.
We can slim down our total disk footprint by just making them builtins.
This reduces the size of:
make strip install
from 29MB to 24MB on my Debian system.
Note that credential-cache can't operate without support for Unix
sockets. Currently we just don't build it at all when NO_UNIX_SOCKETS is
set. We could continue that with conditionals in the Makefile and our
list of builtins. But instead, let's build a dummy implementation that
dies with an informative message. That has two advantages:
- it's simpler, because the conditional bits are all kept inside
the credential-cache source
- a user who is expecting it to exist will be told _why_ they can't
use it, rather than getting the "credential-cache is not a git
command" error which makes it look like the Git install is broken.
Note that our dummy implementation does still respond to "-h" in order
to appease t0012 (and this may be a little friendlier for users, as
well).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Over the years some more programs have become builtins, but nobody
updated this MSVC-specific section of the file (which specifically says
that it should not include builtins). Let's bring it up to date.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We've adopted a convention that any on-stack structure can be
initialized to have zero values in all fields with "= { 0 }", even
when the first field happens to be a pointer, but sparse complained
that a null pointer should be spelled NULL for a long time. Start
using -Wno-universal-initializer option to squelch it.
* lo/sparse-universal-zero-init:
sparse: allow '{ 0 }' to be used without warnings
In standard C, '{ 0 }' can be used as an universal zero-initializer.
However, Sparse complains if this is used on a type where the first
member (possibly nested) is a pointer since Sparse purposely wants
to warn when '0' is used to initialize a pointer type.
Legitimaly, it's desirable to be able to use '{ 0 }' as an idiom
without these warnings [1,2]. To allow this, an option have now
been added to Sparse:
537e3e2dae univ-init: conditionally accept { 0 } without warnings
So, add this option to the SPARSE_FLAGS variable.
Note: The option have just been added to Sparse. So, to benefit
now from this patch it's needed to use the latest Sparse
source from kernel.org. The option will simply be ignored
by older versions of Sparse.
[1] https://lore.kernel.org/r/e6796c60-a870-e761-3b07-b680f934c537@ramsayjones.plus.com
[2] https://lore.kernel.org/r/xmqqd07xem9l.fsf@gitster.c.googlers.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ccd469450a (date.c: switch to reentrant {gm,local}time_r, 2019-11-28)
removes the only gmtime() call we had and moves to gmtime_r() which
doesn't have the same portability problems.
Remove the compat gmtime code since it is no longer needed, and confirm
by successfull running t4212 in FreeBSD 9.3 amd64 (the oldest I could
get a hold off).
Further work might be needed to ensure 32bit time_t systems (like FreeBSD
i386) will handle correctly the overflows tested in t4212, but that is
orthogonal to this change, and it doesn't change the current behaviour
as neither gmtime() or gmtime_r() will ever return NULL on those systems
because time_t is unsigned.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "bugreport" tool.
* es/bugreport:
bugreport: drop extraneous includes
bugreport: add compiler info
bugreport: add uname info
bugreport: gather git version and build info
bugreport: add tool to generate debugging info
help: move list_config_help to builtin/help
Introduce an extension to the commit-graph to make it efficient to
check for the paths that were modified at each commit using Bloom
filters.
* gs/commit-graph-path-filter:
bloom: ignore renames when computing changed paths
commit-graph: add GIT_TEST_COMMIT_GRAPH_CHANGED_PATHS test flag
t4216: add end to end tests for git log with Bloom filters
revision.c: add trace2 stats around Bloom filter usage
revision.c: use Bloom filters to speed up path based revision walks
commit-graph: add --changed-paths option to write subcommand
commit-graph: reuse existing Bloom filters during write
commit-graph: write Bloom filters to commit graph file
commit-graph: examine commits by generation number
commit-graph: examine changed-path objects in pack order
commit-graph: compute Bloom filters for changed paths
diff: halt tree-diff early after max_changes
bloom.c: core Bloom filter implementation for changed paths.
bloom.c: introduce core Bloom filter constructs
bloom.c: add the murmur3 hash implementation
commit-graph: define and use MAX_NUM_CHUNKS
The build procedure did not use the libcurl library and its include
files correctly for a custom-built installation.
* jk/build-with-right-curl:
Makefile: avoid running curl-config unnecessarily
Makefile: use curl-config --cflags
Makefile: avoid running curl-config multiple times
Code in builtin/*, i.e. those can only be called from within
built-in subcommands, that implements bulk of a couple of
subcommands have been moved to libgit.a so that they could be used
by others.
* dl/libify-a-few:
Lib-ify prune-packed
Lib-ify fmt-merge-msg
Raise the minimum required version of docbook-xsl package to 1.74,
as 1.74.0 was from late 2008, which is more than 10 years old, and
drop compatibility cruft from our documentation suite.
* ma/doc-discard-docbook-xsl-1.73:
user-manual.conf: don't specify [listingblock]
INSTALL: drop support for docbook-xsl before 1.74
manpage-normal.xsl: fold in manpage-base.xsl
manpage-bold-literal.xsl: stop using git.docbook.backslash
Doc: drop support for docbook-xsl before 1.73.0
Doc: drop support for docbook-xsl before 1.72.0
Doc: drop support for docbook-xsl before 1.71.1
Code cleanup.
* jk/oid-array-cleanups:
oidset: stop referring to sha1-array
ref-filter: stop referring to "sha1 array"
bisect: stop referring to sha1_array
test-tool: rename sha1-array to oid-array
oid_array: rename source file from sha1-array
oid_array: use size_t for iteration
oid_array: use size_t for count and allocation
Teach Git how to prompt the user for a good bug report: reproduction
steps, expected behavior, and actual behavior. Later, Git can learn how
to collect some diagnostic information from the repository.
If users can send us a well-written bug report which contains diagnostic
information we would otherwise need to ask the user for, we can reduce
the number of question-and-answer round trips between the reporter and
the Git contributor.
Users may also wish to send a report like this to their local "Git
expert" if they have put their repository into a state they are confused
by.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Starting in 3ac68a93fd, help.o began to depend on builtin/branch.o,
builtin/clean.o, and builtin/config.o. This meant that help.o was
unusable outside of the context of the main Git executable.
To make help.o usable by other commands again, move list_config_help()
into builtin/help.c (where it makes sense to assume other builtin libraries
are present).
When command-list.h is included but a member is not used, we start to
hear a compiler warning. Since the config list is generated in a fairly
different way than the command list, and since commands and config
options are semantically different, move the config list into its own
header and move the generator into its own script and build rule.
For reasons explained in 976aaedc (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29), some build
artifacts we consider non-source files cannot be generated in the
Visual Studio environment, and we already have some Makefile tweaks
to help Visual Studio to use generated command-list.h header file.
Do the same to a new generated file, config-list.h, introduced by
this change.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Continue the process of lib-ifying the autostash code. In a future
commit, this will be used to implement `--autostash` in other builtins.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 94a88e2524 (Makefile: avoid running curl-config multiple times,
2020-03-26) put the call to $(CURL_CONFIG) into a "simple" variable
which is expanded immediately, rather than expanding it each time it's
needed. However, that also means that we expand it whenever the Makefile
is parsed, whether we need it or not.
This is wasteful, but also breaks the ci/test-documentation.sh job, as
it does not have curl at all and complains about the extra messages to
stderr. An easy way to see it is just:
$ make CURL_CONFIG=does-not-work check-builtins
make: does-not-work: Command not found
make: does-not-work: Command not found
GIT_VERSION = 2.26.0.108.gb3f3f45f29
make: does-not-work: Command not found
make: does-not-work: Command not found
./check-builtins.sh
We can get the best of both worlds if we're willing to accept a little
Makefile hackery. Courtesy of the article at:
http://make.mad-scientist.net/deferred-simple-variable-expansion/
this patch uses a lazily-evaluated recursive variable which replaces its
contents with an immediately assigned simple one on first use.
Reported-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the actual data structure name, as well as the source file
that contains the code we're testing. The test scripts need updating to
use the new name, as well.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for computing changed paths Bloom filters,
implement the Murmur3 hash algorithm as described in [1].
It hashes the given data using the given seed and produces
a uniformly distributed hash value.
[1] https://en.wikipedia.org/wiki/MurmurHash#Algorithm
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Reviewed-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Garima Singh <garima.singh@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the DOCBOOK_XSL_172 config knob, which was needed with docbook-xsl
1.72 (but neither 1.71 nor 1.73). Version 1.73.0 is more than twelve
years old.
Together with the last few commits, we are now at a point where we don't
have any Makefile knobs to cater to old/broken versions of docbook-xsl.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
docbook-xsl 1.72.0 is thirteen years old. Drop the ASCIIDOC_ROFF knob
which was needed to support 1.68.1 - 1.71.1. The next commit will
increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add the result of "curl-config --libs" when linking curl programs,
but we never bother calling "curl-config --cflags". Presumably nobody
noticed because:
- a system libcurl installed into /usr/include/curl wouldn't need any
flags ("/usr/include" is already in the search path, and the
#include lines all look <curl/curl.h>, etc).
- using CURLDIR sets up both the includes and the library path
However, if you prefer CURL_CONFIG to CURLDIR, something simple like:
make CURL_CONFIG=/path/to/curl-config
doesn't work. We'd link against the libcurl specified by that program,
but not find its header files when compiling.
Let's invoke "curl-config --cflags" similar to the way we do for
"--libs". Note that we'll feed the result into BASIC_CFLAGS. The rest of
the Makefile doesn't distinguish which files need curl support during
compilation and which do not. That should be OK, though. At most this
should be adding a "-I" directive, and this is how CURLDIR already
behaves. And since we follow the immediate-variable pattern from
CURL_LDFLAGS, we won't accidentally invoke curl-config once per
compilation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user hasn't set the CURL_LDFLAGS Makefile variable, we invoke
curl-config like this:
CURL_LIBCURL += $(shell $(CURL_CONFIG) --libs)
Because the shell function is run when the value is expanded, we invoke
curl-config each time we need to link something (which generally ends up
being four times for a full build).
Instead, let's use an immediate Makefile variable, which only needs
expanding once. We can't combine that with the existing "+=", but since
we only do this when CURL_LDFLAGS is undefined, we can just set that
variable.
That also allows us to simplify our conditional a bit, since both sides
will then put the result into CURL_LIBCURL. While we're touching it,
let's fix the indentation to match the nearby code (we're inside an
outer conditional, so everything else is indented one level).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash" has kept an escape hatch to use the scripted version
for a few releases, which got stale. It has been removed.
* tg/retire-scripted-stash:
stash: remove the stash.useBuiltin setting
stash: get git_stash_config at the top level
Revamping of the advise API to allow more systematic enumeration of
advice knobs in the future.
* hw/advise-ng:
tag: use new advice API to check visibility
advice: revamp advise API
advice: change "setupStreamFailure" to "setUpstreamFailure"
advice: extract vadvise() from advise()
In builtin.h, there exists the distinctly lib-ish function
prune_packed_objects(). This function can currently only be called by
built-in commands but, unlike all of the other functions in the header,
it does not make sense to impose this restriction as the functionality
can be logically reused in libgit.
Extract this function into prune-packed.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin.h, there exists the distinctly "lib-ish" function
fmt_merge_msg(). This function can currently only be called by built-in
commands but, unlike most of the other functions in the header, it does
not make sense to impose this restriction as the functionality can be
logically reused in libgit.
Extract this function into fmt-merge-msg.c so that related definitions
can exist clearly in their own header file.
While we're at it, clean up #includes that are unused.
This patch is best viewed with --color-moved.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many += lists in the Makefile and, over time, they have gotten
slightly out of ASCII order. Sort all += lists to bring them back in
order.
ASCII sorting was chosen over strict alphabetical order even though, if
we omit file prefixes, the lists aren't sorted in strictly alphabetical
order (e.g. archive.o comes after archive-zip.o instead of before
archive-tar.o). This is intentional because the purpose of maintaining
the sorted list is to ensure line insertions are deterministic. By using
ASCII ordering, it is more easily mechanically reproducible in the
future, such as by using :sort in Vim.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently it's very easy for the advice library's callers to miss
checking the visibility step before printing an advice. Also, it makes
more sense for this step to be handled by the advice library.
Add a new advise_if_enabled function that checks the visibility of
advice messages before printing.
Add a new helper advise_enabled to check the visibility of the advice
if the caller needs to carry out complicated processing based on that
value.
A list of advice_settings is added to cache the config variables names
and values, it's intended to replace advice_config[] and the global
variables once we migrate all the callers to use the new APIs.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote rename X Y" needs to adjust configuration variables
(e.g. branch.<name>.remote) whose value used to be X to Y.
branch.<name>.pushRemote is now also updated.
* bw/remote-rename-update-config:
remote rename/remove: gently handle remote.pushDefault config
config: provide access to the current line number
remote rename/remove: handle branch.<name>.pushRemote config values
remote: clean-up config callback
remote: clean-up by returning early to avoid one indentation
pull --rebase/remote rename: document and honor single-letter abbreviations rebase types
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
When 46af44b07d (pull --rebase=<type>: allow single-letter abbreviations
for the type, 2018-08-04) landed in Git, it had the side effect that
not only 'pull --rebase=<type>' accepted the single-letter abbreviations
but also the 'pull.rebase' and 'branch.<name>.rebase' configurations.
However, 'git remote rename' did not honor these single-letter
abbreviations when reading the 'branch.*.rebase' configurations.
We now document the single-letter abbreviations and both code places
share a common function to parse the values of 'git pull --rebase=*',
'pull.rebase', and 'branches.*.rebase'.
The only functional change is the handling of the `branch_info::rebase`
value. Before it was an unsigned enum, thus the truth value could be
checked with `branch_info::rebase != 0`. But `enum rebase_type` is
signed, thus the truth value must now be checked with
`branch_info::rebase >= REBASE_TRUE`
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Work around test breakages caused by custom regex engine used in
libasan, when address sanitizer is used with more recent versions
of gcc and clang.
* jk/asan-build-fix:
Makefile: use compat regex with SANITIZE=address
Recent versions of the gcc and clang Address Sanitizer produce test
failures related to regexec(). This triggers with gcc-10 and clang-8
(but not gcc-9 nor clang-7). Running:
make CC=gcc-10 SANITIZE=address test
results in failures in t4018, t3206, and t4062.
The cause seems to be that when built with ASan, we use a different
version of regexec() than normal. And this version doesn't understand
the REG_STARTEND flag. Here's my evidence supporting that.
The failure in t4062 is an ASan warning:
expecting success of 4062.2 '-G matches':
git diff --name-only -G "^(0{64}){64}$" HEAD^ >out &&
test 4096-zeroes.txt = "$(cat out)"
=================================================================
==672994==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7fa76f672000 at pc 0x7fa7726f75b6 bp 0x7ffe41bdda70 sp 0x7ffe41bdd220
READ of size 4097 at 0x7fa76f672000 thread T0
#0 0x7fa7726f75b5 (/lib/x86_64-linux-gnu/libasan.so.6+0x4f5b5)
#1 0x562ae0c9c40e in regexec_buf /home/peff/compile/git/git-compat-util.h:1117
#2 0x562ae0c9c40e in diff_grep /home/peff/compile/git/diffcore-pickaxe.c:52
#3 0x562ae0c9cc28 in pickaxe_match /home/peff/compile/git/diffcore-pickaxe.c:166
[...]
In this case we're looking in a buffer which was mmap'd via
reuse_worktree_file(), and whose size is 4096 bytes. But libasan's
regex tries to look at byte 4097 anyway! If we tweak Git like this:
diff --git a/diff.c b/diff.c
index 8e2914c031..cfae60c120 100644
--- a/diff.c
+++ b/diff.c
@@ -3880,7 +3880,7 @@ static int reuse_worktree_file(struct index_state *istate,
*/
if (ce_uptodate(ce) ||
(!lstat(name, &st) && !ie_match_stat(istate, ce, &st, 0)))
- return 1;
+ return 0;
return 0;
}
to use a regular buffer (with a trailing NUL) instead of an mmap, then
the complaint goes away.
The other failures are actually diff output with an incorrect funcname
header. If I instrument xdiff to show the funcname matching like so:
diff --git a/xdiff-interface.c b/xdiff-interface.c
index 8509f9ea22..f6c3dc1986 100644
--- a/xdiff-interface.c
+++ b/xdiff-interface.c
@@ -197,6 +197,7 @@ struct ff_regs {
struct ff_reg {
regex_t re;
int negate;
+ char *printable;
} *array;
};
@@ -218,7 +219,12 @@ static long ff_regexp(const char *line, long len,
for (i = 0; i < regs->nr; i++) {
struct ff_reg *reg = regs->array + i;
- if (!regexec_buf(®->re, line, len, 2, pmatch, 0)) {
+ int ret = regexec_buf(®->re, line, len, 2, pmatch, 0);
+ warning("regexec %s:\n regex: %s\n buf: %.*s",
+ ret == 0 ? "matched" : "did not match",
+ reg->printable,
+ (int)len, line);
+ if (!ret) {
if (reg->negate)
return -1;
break;
@@ -264,6 +270,7 @@ void xdiff_set_find_func(xdemitconf_t *xecfg, const char *value, int cflags)
expression = value;
if (regcomp(®->re, expression, cflags))
die("Invalid regexp to look for hunk header: %s", expression);
+ reg->printable = xstrdup(expression);
free(buffer);
value = ep + 1;
}
then when compiling with ASan and gcc-10, running the diff from t4018.66
produces this:
$ git diff -U1 cpp-skip-access-specifiers
warning: regexec did not match:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: private:
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ private:
void DoSomething();
int ChangeMe;
};
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
That first regex should match (and is negated, so it should be telling
us _not_ to match "private:"). But it wouldn't if regexec() is looking
at the whole buffer, and not just the length-limited line we've fed to
regexec_buf(). So this is consistent again with REG_STARTEND being
ignored.
The correct output (compiling without ASan, or gcc-9 with Asan) looks
like this:
warning: regexec matched:
regex: ^[ ]*[A-Za-z_][A-Za-z_0-9]*:[[:space:]]*($|/[/*])
buf: private:
[...more lines that we end up not using...]
warning: regexec matched:
regex: ^((::[[:space:]]*)?[A-Za-z_].*)$
buf: class RIGHT : public Baseclass
diff --git a/cpp-skip-access-specifiers b/cpp-skip-access-specifiers
index 4d4a9db..ebd6f42 100644
--- a/cpp-skip-access-specifiers
+++ b/cpp-skip-access-specifiers
@@ -6,3 +6,3 @@ class RIGHT : public Baseclass
void DoSomething();
- int ChangeMe;
+ int IWasChanged;
};
So it really does seem like libasan's regex engine is ignoring
REG_STARTEND. We should be able to work around it by compiling with
NO_REGEX, which would use our local regexec(). But to make matters even
more interesting, this isn't enough by itself.
Because ASan has support from the compiler, it doesn't seem to intercept
our call to regexec() at the dynamic library level. It actually
recognizes when we are compiling a call to regexec() and replaces it
with ASan-specific code at that point. And unlike most of our other
compat code, where we might have git_mmap() or similar, the actual
symbol name in the compiled compat/regex code is regexec(). So just
compiling with NO_REGEX isn't enough; we still end up in libasan!
We can work around that by having the preprocessor replace regexec with
git_regexec (both in the callers and in the actual implementation), and
we truly end up with a call to our custom regex code, even when
compiling with ASan. That's probably a good thing to do anyway, as it
means anybody looking at the symbols later (e.g., in a debugger) would
have a better indication of which function is which. So we'll do the
same for the other common regex functions (even though just regexec() is
enough to fix this ASan problem).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, `parse_pathspec_file()` was tested indirectly by invoking
git commands with properly crafted inputs. As demonstrated by the
previous bugfix, testing complicated black boxes indirectly can lead to
tests that silently test the wrong thing.
Introduce direct tests for `parse_pathspec_file()`.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The effort to move "git-add--interactive" to C continues.
* js/add-p-in-c:
built-in add -p: show helpful hint when nothing can be staged
built-in add -p: only show the applicable parts of the help text
built-in add -p: implement the 'q' ("quit") command
built-in add -p: implement the '/' ("search regex") command
built-in add -p: implement the 'g' ("goto") command
built-in add -p: implement hunk editing
strbuf: add a helper function to call the editor "on an strbuf"
built-in add -p: coalesce hunks after splitting them
built-in add -p: implement the hunk splitting feature
built-in add -p: show different prompts for mode changes and deletions
built-in app -p: allow selecting a mode change as a "hunk"
built-in add -p: handle deleted empty files
built-in add -p: support multi-file diffs
built-in add -p: offer a helpful error message when hunk navigation failed
built-in add -p: color the prompt and the help text
built-in add -p: adjust hunk headers as needed
built-in add -p: show colored hunks by default
built-in add -i: wire up the new C code for the `patch` command
built-in add -i: start implementing the `patch` functionality in C
Management of sparsely checked-out working tree has gained a
dedicated "sparse-checkout" command.
* ds/sparse-cone: (21 commits)
sparse-checkout: improve OS ls compatibility
sparse-checkout: respect core.ignoreCase in cone mode
sparse-checkout: check for dirty status
sparse-checkout: update working directory in-process for 'init'
sparse-checkout: cone mode should not interact with .gitignore
sparse-checkout: write using lockfile
sparse-checkout: use in-process update for disable subcommand
sparse-checkout: update working directory in-process
sparse-checkout: sanitize for nested folders
unpack-trees: add progress to clear_ce_flags()
unpack-trees: hash less in cone mode
sparse-checkout: init and set in cone mode
sparse-checkout: use hashmaps for cone patterns
sparse-checkout: add 'cone' mode
trace2: add region in clear_ce_flags
sparse-checkout: create 'disable' subcommand
sparse-checkout: add '--stdin' option to set subcommand
sparse-checkout: 'set' subcommand
clone: add --sparse mode
sparse-checkout: create 'init' subcommand
...
Correct unintentional duplication(s) of words, such as "the the",
and "can can" etc.
The changes are only applied to cases where it's fixing what is clearly
wrong or prone to misunderstanding, as suggested by the reviewers.
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Denton Liu <liu.denton@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ryenus <ryenus@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ebb7baf0 ("Makefile: add a hdr-check target", 2018-09-19)
implemented hdr-check target, it wanted to leave some header files
exempt from the stricter check the target implements, and added
GEN_HDRS macro.
This however is probably a bad move for two reasons:
- If we value the header cleanliness check, we eventually want to
teach our header generating scripts to produce clean headers.
Keeping the blanket "generated headers can be left as dirty as we
want" exception does not nudge us in the right direction.
- There is a list of generated header files, GENERATED_H, which is
used to keep track of dependencies. Presence of GEN_HDRS that is
too similarly named would confuse developers who are adding new
generated header files which list to add theirs.
- Even though unicode-width.h could be generated using a contrib/
script, as far as our build infrastructure is concerned, it is a
source file that is tracked in the source control system. Its
presence in GEN_HDRS list is doubly misleading.
Get rid of GEN_HDRS, which is used only once to list the headers we
do not run hdr-check test on, and instead explicitly list that the
ones, either tracked or generated, that we exempt from the test.
This allows GENERATED_H to be the sole "here are build artifact
header files that are expendable" list, so use it in the clean
target to $(RM) them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous steps, we re-implemented the main loop of `git add -i`
in C, and most of the commands.
Notably, we left out the actual functionality of `patch`, as the
relevant code makes up more than half of `git-add--interactive.perl`,
and is actually pretty independent of the rest of the commands.
With this commit, we start to tackle that `patch` part. For better
separation of concerns, we keep the code in a separate file,
`add-patch.c`. The new code is still guarded behind the
`add.interactive.useBuiltin` config setting, and for the moment,
it can only be called via `git add -p`.
The actual functionality follows the original implementation of
5cde71d64a (git-add --interactive, 2006-12-10), but not too closely
(for example, we use string offsets rather than copying strings around,
and after seeing whether the `k` and `j` commands are applicable, in the
C version we remember which previous/next hunk was undecided, and use it
rather than looking again when the user asked to jump).
As a further deviation from that commit, We also use a comma instead of
a slash to separate the available commands in the prompt, as the current
version of the Perl script does this, and we also add a line about the
question mark ("print help") to the help text.
While it is tempting to use this conversion of `git add -p` as an excuse
to work on `apply_all_patches()` so that it does _not_ want to read a
file from `stdin` or from a file, but accepts, say, an `strbuf` instead,
we will refrain from this particular rabbit hole at this stage.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike previous conversions to C, where we started with a built-in
helper, we start this conversion by adding an interception in the
`run_add_interactive()` function when the new opt-in
`add.interactive.useBuiltin` config knob is turned on (or the
corresponding environment variable `GIT_TEST_ADD_I_USE_BUILTIN`), and
calling the new internal API function `run_add_i()` that is implemented
directly in libgit.a.
At this point, the built-in version of `git add -i` only states that it
cannot do anything yet. In subsequent patches/patch series, the
`run_add_i()` function will gain more and more functionality, until it
is feature complete. The whole arc of the conversion can be found in the
PRs #170-175 at https://github.com/gitgitgadget/git.
The "--helper approach" can unfortunately not be used here: on Windows
we face the very specific problem that a `system()` call in
Perl seems to close `stdin` in the parent process when the spawned
process consumes even one character from `stdin`. Which prevents us from
implementing the main loop in C and still trying to hand off to the Perl
script.
The very real downside of the approach we have to take here is that the
test suite won't pass with `GIT_TEST_ADD_I_USE_BUILTIN=true` until the
conversion is complete (the `--helper` approach would have let it pass,
even at each of the incremental conversion steps).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git commit-graph read' subcommand is used in test scripts to check
that the commit-graph contents match the expected data. Mostly, this
helps check the header information and the list of chunks. Users do not
need this information, so move the functionality to a test helper.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CI updates.
* js/azure-pipelines-msvc:
ci: also build and test with MS Visual Studio on Azure Pipelines
ci: really use shallow clones on Azure Pipelines
tests: let --immediate and --write-junit-xml play well together
test-tool run-command: learn to run (parts of) the testsuite
vcxproj: include more generated files
vcxproj: only copy `git-remote-http.exe` once it was built
msvc: work around a bug in GetEnvironmentVariable()
msvc: handle DEVELOPER=1
msvc: ignore some libraries when linking
compat/win32/path-utils.h: add #include guards
winansi: use FLEX_ARRAY to avoid compiler warning
msvc: avoid using minus operator on unsigned types
push: do not pretend to return `int` from `die_push_simple()`
When the %.cocci.patch target was defined in 63f0a758a0 (add coccicheck
make target, 2016-09-15), it included a mechanism to suppress the noisy
output, similar to the $(QUIET_<x>) family of variables.
In the case where one wants to inspect the output hidden by
$(QUIET_<x>), one could define $(V) for verbose output. In the
%.cocci.patch target, this was not implemented.
Move the output suppression into the $(QUIET_SPATCH) variable which is
used like the other $(QUIET_<x>) variables. While we're at it, change
the number of spaces printed from 5 to 4, like the other variables
there.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rename detection logic sorts a list of rename source candidates
by similarity to pick the best candidate, which means that a tie
between sources with the same similarity is broken by the original
location in the original candidate list (which is sorted by path).
Force the sorting by similarity done with a stable sort, which is
not promised by system supplied qsort(3), to ensure consistent
results across platforms.
* js/diff-rename-force-stable-sort:
diffcore_rename(): use a stable sort
Move git_sort(), a stable sort, into into libgit.a
Dev support.
* dl/honor-cflags-in-hdr-check:
ci: run `hdr-check` as part of the `Static Analysis` job
Makefile: emulate compile in $(HCO) target better
pack-bitmap.h: remove magic number
promisor-remote.h: include missing header
apply.h: include missing header
Coccinelle checks are done on more source files than before now.
* dl/cocci-everywhere:
Makefile: run coccicheck on more source files
Makefile: strip leading ./ in $(FIND_SOURCE_FILES)
Makefile: define THIRD_PARTY_SOURCES
Makefile: strip leading ./ in $(LIB_H)
... because we can, now. Technically, we actually build using `MSBuild`,
which is however pretty close to building interactively in Visual
Studio.
As there is no convenient way to run Git's test suite in Visual Studio,
we unpack a Portable Git to run it, using the just-added test helper to
allow running test scripts in parallel.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `qsort()` function is not guaranteed to be stable, i.e. it does not
promise to maintain the order of items it is told to consider equal. In
contrast, the `git_sort()` function we carry in `compat/qsort.c` _is_
stable, by virtue of implementing a merge sort algorithm.
In preparation for using a stable sort in Git's rename detection, move
the stable sort into `libgit.a` so that it is compiled in
unconditionally, and rename it to `git_stable_qsort()`.
Note: this also makes the hack obsolete that was introduced in
fe21c6b285 (mingw: reencode environment variables on the fly (UTF-16
<-> UTF-8), 2018-10-30), where we included `compat/qsort.c` directly in
`compat/mingw.c` to use the stable sort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when testing headers using `make hdr-check`, headers are
directly compiled. Although this seems to test the headers, this is too
strict since we treat the headers as C sources. As a result, this will
cause warnings to appear that would otherwise not, such as a static
variable definition intended for later use throwing a unused variable
warning.
In addition, on platforms that can run `make hdr-check` but require
custom flags, this target was failing because none of them were being
passed to the compiler. For example, on MacOS, the NO_OPENSSL flag was
being set but it was not being passed into compiler so the check was
failing.
Fix these problems by emulating the compile process better, including
test compiling dummy *.hcc C sources generated from the *.h files and
passing $(ALL_CFLAGS) into the compiler for the $(HCO) target so that
these custom flags can be used.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
Before, when running the "coccicheck" target, only the source files
which were being compiled would have been checked by Coccinelle.
However, just because we aren't compiling a source file doesn't mean we
have to exclude it from analysis. This will allow us to catch more
mistakes, in particular ones that affect Windows-only sources since
Coccinelle currently runs only on Linux.
Make the "coccicheck" target run on all C sources except for those that
are taken from some third-party source. We don't want to patch these
files since we want them to be as close to upstream as possible so that
it'll be easier to pull in upstream updates.
When running a build on Arch Linux with no additional flags provided,
after applying this patch, the following sources are now checked:
* block-sha1/sha1.c
* compat/access.c
* compat/basename.c
* compat/fileno.c
* compat/gmtime.c
* compat/hstrerror.c
* compat/memmem.c
* compat/mingw.c
* compat/mkdir.c
* compat/mkdtemp.c
* compat/mmap.c
* compat/msvc.c
* compat/pread.c
* compat/precompose_utf8.c
* compat/qsort.c
* compat/setenv.c
* compat/sha1-chunked.c
* compat/snprintf.c
* compat/stat.c
* compat/strcasestr.c
* compat/strdup.c
* compat/strtoimax.c
* compat/strtoumax.c
* compat/unsetenv.c
* compat/win32/dirent.c
* compat/win32/path-utils.c
* compat/win32/pthread.c
* compat/win32/syslog.c
* compat/win32/trace2_win32_process_info.c
* compat/win32mmap.c
* compat/winansi.c
* ppc/sha1.c
This also results in the following source now being excluded:
* compat/obstack.c
Instead of generating $(FOUND_C_SOURCES) from a
`$(shell $(FIND_SOURCE_FILES))` invocation, an alternative design was
considered which involved converting $(FIND_SOURCE_FILES) into
$(SOURCE_FILES) which would hold a list of filenames from the
$(FIND_SOURCE_FILES) invocation. We would simply filter `%.c` files into
$(ALL_C_SOURCES). $(SOURCE_FILES) would then be passed directly to the
etags, ctags and cscope commands. We can see from the following
invocation
$ git ls-files '*.[hcS]' '*.sh' ':!*[tp][0-9][0-9][0-9][0-9]*' ':!contrib' | wc -c
12779
that the number of characters in this list would pose a problem on
platforms with short command-line length limits (such as CMD which has a
max of 8191 characters). As a result, we don't perform this change.
However, we can see that the same issue may apply when running
Coccinelle since $(COCCI_SOURCES) is also a list of filenames:
if ! echo $(COCCI_SOURCES) | xargs $$limit \
$(SPATCH) --sp-file $< $(SPATCH_FLAGS) \
>$@+ 2>$@.log; \
This is justified since platforms that support Coccinelle generally have
reasonably long command-line length limits and so we are safe for the
foreseeable future.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, $(FIND_SOURCE_FILES) has two modes: if `git ls-files` is
present, it will use that to enumerate the files in the repository; else
it will use `$(FIND) .` to enumerate the files in the directory.
There is a subtle difference between these two methods, however. With
ls-files, filenames don't have a leading `./` while with $(FIND), they
do. This does not currently pose a problem but in a future patch, we
will be using `filter-out` to process the list of files with the
assumption that there is no prefix.
Unify the two possible invocations in $(FIND_SOURCE_FILES) by using sed
to remove the `./` prefix in the $(FIND) case.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some files in our codebase are borrowed from other projects, and
minimally updated to suit our own needs. We'd sometimes need to tell
our own sources and these third-party sources apart for management
purposes (e.g. we may want to be less strict about coding style and
other issues on third-party files).
Define the $(MAKE) variable THIRD_PARTY_SOURCES that can be used to
match names of third-party sources.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'progress.c' has seen a few fixes recently [1], and, unfortunately,
some of those fixes required further fixes [2]. It seems it's time to
have a few tests focusing on the subtleties of the progress display.
Add the 'test-tool progress' subcommand to help testing the progress
display, reading instructions from standard input and turning them
into calls to the display_progress() and display_throughput()
functions with the given parameters.
The progress display is, however, critically dependent on timing,
because it's only updated once every second or, if the toal is known
in advance, every 1%, and there is the throughput rate as well. These
make the progress display far too undeterministic for testing as-is.
To address this, add a few testing-specific variables and functions to
'progress.c', allowing the the new test helper to:
- Disable the triggered-every-second SIGALRM and set the
'progress_update' flag explicitly based in the input instructions.
This way the progress line will be updated deterministically when
the test wants it to be updated.
- Specify the time elapsed since start_progress() to make the
throughput rate calculations deterministic.
Add the new test script 't0500-progress-display.sh' to check a few
simple cases with and without throughput, and that a shorter progress
line properly covers up the previously displayed line in different
situations.
[1] See commits 545dc345eb (progress: break too long progress bar
lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous
progress update dynamically, 2019-04-12).
[2] 1aed1a5f25 (progress: avoid empty line when breaking the progress
line, 2019-05-19)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, $(LIB_H) is generated from two modes: if `git ls-files` is
present, it will use that to enumerate the files in the repository; else
it will use `$(FIND) .` to enumerate the files in the directory.
There is a subtle difference between these two methods, however. With
ls-files, filenames don't have a leading `./` while with $(FIND), they
do. This results in $(CHK_HDRS) having to substitute out the leading
`./` before it uses $(LIB_H).
Unify the two possible values in $(LIB_H) by using patsubst to remove the
`./` prefix at its definition.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A mechanism to affect the default setting for a (related) group of
configuration variables is introduced.
* ds/feature-macros:
repo-settings: create feature.experimental setting
repo-settings: create feature.manyFiles setting
repo-settings: parse core.untrackedCache
commit-graph: turn on commit-graph by default
t6501: use 'git gc' in quiet mode
repo-settings: consolidate some config settings
e87de7cab4 ("grep: un-break building with PCRE < 8.32", 2017-05-25)
added a restriction for JIT support that is no longer needed after
pcre_jit_exec() calls were removed.
Reorganize the definitions in grep.h so that JIT support could be
detected early and NO_LIBPCRE1_JIT could be used reliably to enforce
JIT doesn't get used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few important config settings that are not loaded
during git_default_config. These are instead loaded on-demand.
Centralize these config options to a single scan, and store
all of the values in a repo_settings struct. The values for
each setting are initialized as negative to indicate "unset".
This centralization will be particularly important in a later
change to introduce "meta" config settings that change the
defaults for these config settings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
When compiling with Visual Studio, the projects' names are identical to
the executables modulo the extensions. Read: there will exist both a
directory called `git` as well as an executable called `git.exe` in the
end. Which means that the bin-wrappers *need* to target the `.exe` files
lest they try to execute directories.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjust the dir-iterator API and apply it to the local clone
optimization codepath.
* mt/dir-iterator-updates:
clone: replace strcmp by fspathcmp
clone: use dir-iterator to avoid explicit dir traversal
clone: extract function from copy_or_link_directory
clone: copy hidden paths at local clone
dir-iterator: add flags parameter to dir_iterator_begin
dir-iterator: refactor state machine model
dir-iterator: use warning_errno when possible
dir-iterator: add tests for dir-iterator API
clone: better handle symlinked files at .git/objects/
clone: test for our behavior on odd objects/* content
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
Extend the test coverage a bit.
* cc/test-oidmap:
t0016: add 'remove' subcommand test
test-oidmap: remove 'add' subcommand
test-hashmap: remove 'hash' command
oidmap: use sha1hash() instead of static hash() function
t: add t0016-oidmap.sh
t/helper: add test-oidmap.c
Create t/helper/test-dir-iterator.c, which prints relevant information
about a directory tree iterated over with dir-iterator.
Create t/t0066-dir-iterator.sh, which tests that dir-iterator does
iterate through a whole directory tree as expected.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
[matheus.bernardino: update to use test-tool and some minor aesthetics]
Helped-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support to build with MSVC has been updated.
* jh/msvc:
msvc: ignore .dll and incremental compile output
msvc: avoid debug assertion windows in Debug Mode
msvc: do not pretend to support all signals
msvc: add pragmas for common warnings
msvc: add a compile-time flag to allow detailed heap debugging
msvc: support building Git using MS Visual C++
msvc: update Makefile to allow for spaces in the compiler path
msvc: fix detect_msys_tty()
msvc: define ftello()
msvc: do not re-declare the timespec struct
msvc: mark a variable as non-const
msvc: define O_ACCMODE
msvc: include sigset_t definition
msvc: fix dependencies of compat/msvc.c
mingw: replace mingw_startup() hack
obstack: fix compiler warning
cache-tree/blame: avoid reusing the DEBUG constant
t0001 (mingw): do not expect a specific order of stdout/stderr
Mark .bat files as requiring CR/LF endings
mingw: fix a typo in the msysGit-specific section
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
As fetch_objects() is now used only in promisor-remote.c
and should't be used outside it, let's move it into
promisor-remote.c, make it static there, and remove
fetch-object.{c,h}.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The promisor-remote.{c,h} files will contain functions to
manage many promisor remotes.
We expect that there will not be a lot of promisor remotes,
so it is ok to use a simple linked list to manage them.
Helped-by: Jeff King <peff@peff.net>
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, Git can be built using the Microsoft toolchain, via:
make MSVC=1 [DEBUG=1]
Third party libraries are built from source using the open source
"vcpkg" tool set. See https://github.com/Microsoft/vcpkg
On a first build, the vcpkg tools and the third party libraries are
automatically downloaded and built. DLLs for the third party libraries
are copied to the top-level (and t/helper) directory to facilitate
debugging. See compat/vcbuild/README.
A series of .bat files are invoked by the Makefile to find the location
of the installed version of Visual Studio and the associated compiler
tools (essentially replicating the environment setup performed by a
"Developer Command Prompt"). This should find the most recent VS2015 or
VS2017 installation. Output from these scripts are used by the Makefile
to define compiler and linker pathnames and -I and -L arguments.
The build produces .pdb files for both debug and release builds.
Note: This commit was squashed from an organic series of commits
developed between 2016 and 2018 in Git for Windows' `master` branch.
This combined commit eliminates the obsolete commits related to fetching
NuGet packages for third party libraries. It is difficult to use NuGet
packages for C/C++ sources because they may be built by earlier versions
of the MSVC compiler and have CRT version and linking issues.
Additionally, the C/C++ NuGet packages that we were using tended to not
be updated concurrently with the sources. And in the case of cURL and
OpenSSL, this could expose us to security issues.
Helped-by: Yue Lin Ho <b8732003@student.nsysu.edu.tw>
Helped-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have many GIT_TEST_* variables that accept a <boolean> because
they're implemented in C, and then some that take <non-empty?> because
they're implemented at least partially in shellscript.
Add a helper that wraps git_env_bool() and git_env_ulong() as the
first step in fixing this. This isn't being added as a test-tool mode
because some of these are used outside the test suite.
Part of what this tool does can be done via a trick with "git config"
added in 83d842dc8c ("tests: turn on network daemon tests by default",
2014-02-10) for test_tristate(), i.e.:
git -c magic.variable="$1" config --bool magic.variable 2>/dev/null
But as subsequent changes will show being able to pass along the
default value makes all the difference, and we'll be able to replace
test_tristate() itself with that.
The --type=bool option will be used by subsequent patches, but not
--type=ulong. I figured it was easy enough to add it & test for it so
I left it in so we'd have wrappers for both git_env_*() functions, and
to have a template to make it obvious how we'd add --type=int etc. if
it's needed in the future.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is quite common that MS Visual C++ is installed into a location whose
path contains spaces, therefore we need to quote it.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new helper is very similar to "test-hashmap.c" and will help
test how `struct oidmap` from oidmap.{c,h} can be used.
Helped-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way of specifying the path to find dynamic libraries at runtime
has been simplified. The old default to pass -R/path/to/dir has been
replaced with the new default to pass -Wl,-rpath,/path/to/dir,
which is the more recent GCC uses. Those who need to build with an
old GCC can still use "CC_LD_DYNPATH=-R"
* ab/deprecate-R-for-dynpath:
Makefile: remove the NO_R_TO_GCC_LINKER flag
Update supporting parts of "git rebase" to remove code that should
no longer be used.
* js/rebase-cleanup:
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
Optionally "make coccicheck" can feed multiple source files to
spatch, gaining performance while spending more memory.
* jk/cocci-batch:
coccicheck: make batch size of 0 mean "unlimited"
coccicheck: optionally batch spatch invocations
Change our default CC_LD_DYNPATH invocation to something GCC likes
these days. Since the GCC 4.6 release unknown flags haven't been
passed through to ld(1). Thus our previous default of CC_LD_DYNPATH=-R
would cause an error on modern GCC unless NO_R_TO_GCC_LINKER was set.
This CC_LD_DYNPATH flag is really obscure, and I don't expect anyone
except those working on git development ever use this.
It's not needed to simply link to libraries like say libpcre,
but *only* for those cases where we're linking to such a library not
present in the OS's library directories. See e.g. ldconfig(8) on Linux
for more details.
I use this to compile my git with a LIBPCREDIR=$HOME/g/pcre2/inst as
I'm building that from source, but someone maintaining an OS package
is almost certainly not going to use this. They're just going to set
USE_LIBPCRE=YesPlease after installing the libpcre dependency,
which'll point to OS libraries which ld(1) will find without the help
of CC_LD_DYNPATH.
Another thing that helps mitigate any potential breakage is that we
detect the right type of invocation in configure.ac, which e.g. HP/UX
uses[1], as does IBM's AIX package[2]. From what I can tell both AIX
and Solaris packagers are building git with GCC, so I'm not adding a
corresponding config.mak.uname default to cater to their OS-native
linkers.
Now for an overview of past development in this area:
Our use of "-R" dates back to 455a7f3275 ("More portability.",
2005-09-30). Soon after that in bbfc63dd78 ("gcc does not necessarily
pass runtime libpath with -R", 2006-12-27) the NO_R_TO_GCC flag was
added, allowing optional use of "-Wl,-rpath=".
Then in f5b904db6b ("Makefile: Allow CC_LD_DYNPATH to be overriden",
2008-08-16) the ability to override this flag to something else
entirely was added, as some linkers use neither "-Wl,-rpath," nor
"-R".
From what I can tell we should, with the benefit of hindsight, have
made this change back in 2006. GCC & ld supported this type of
invocation back then, or since at least binutils-gdb.git's[3]
a1ad915dc4 ("[...]Add support for -rpath[...]", 1994-07-20).
Further reading and prior art can be found at [4][5][6][7]. Making a
plain "-R" an error seems from reading those reports to have been
introduced in GCC 4.6 released on March 25, 2011[8], but I couldn't
confirm this with absolute certainty, its release notes are ambiguous
on the subject, and I couldn't be bothered to try to build & bisect it
against GCC 4.5.
1. https://public-inbox.org/git/20190516093412.14795-1-avarab@gmail.com/
2. https://www.ibm.com/developerworks/aix/library/aix-toolbox/alpha.html
3. git://sourceware.org/git/binutils-gdb.git
4. https://github.com/tsuna/boost.m4/issues/15
5. https://bugzilla.gnome.org/show_bug.cgi?id=641416
6. https://stackoverflow.com/questions/12629042/g-4-6-real-error-unrecognized-option-r
7. https://curl.haxx.se/mail/archive-2014-11/0005.html
8. https://gcc.gnu.org/gcc-4.6/changes.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only remaining scripted part of `git rebase` is the
`--preserve-merges` backend. Meaning: there is little reason to keep the
"library of common rebase functions" as a separate file.
While moving the functions to `git-rebase--preserve-merges.sh`, we also
drop the `move_to_original_branch` function that is no longer used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 21853626ea (built-in rebase: call `git am` directly, 2019-01-18),
the built-in rebase already uses the built-in `git am` directly.
Now that d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18) even removed the scripted rebase, there is no longer any
user of `git-rebase--am.sh`, so let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Workaround for standard-compliant but less-than-useful behaviour of
access(2) for the root user.
* cc/access-on-aix-workaround:
git-compat-util: work around for access(X_OK) under root
The internal implementation of "git rebase -i" has been updated to
avoid forking a separate "rebase--interactive" process.
* pw/rebase-i-internal:
rebase -i: run without forking rebase--interactive
rebase: use a common action enum
rebase -i: use struct rebase_options in do_interactive_rebase()
rebase -i: use struct rebase_options to parse args
rebase -i: use struct object_id for squash_onto
rebase -i: use struct commit when parsing options
rebase -i: remove duplication
rebase -i: combine rebase--interactive.c with rebase.c
rebase: use OPT_RERERE_AUTOUPDATE()
rebase: rename write_basic_state()
rebase: don't translate trace strings
sequencer: always discard index after checkout
A "ls-files" that emulates "find" to enumerate files in the working
tree resulted in duplicated Makefile rules that caused the build to
issue an unnecessary warning during a trial build after merge
conflicts are resolved in working tree *.h files but before the
resolved results are added to the index. This has been corrected.
* jc/make-dedup-ls-files-output:
Makefile: dedup list of files obtained from ls-files
Polishing of the new trace2 facility continues. The system-level
configuration can specify site-wide trace2 settings, which can be
overridden with per-user configuration and environment variables.
* jh/trace2-sid-fix:
trace2: fixup access problem on /etc/gitconfig in read_very_early_config
trace2: update docs to describe system/global config settings
trace2: make SIDs more unique
trace2: clarify UTC datetime formatting
trace2: report peak memory usage of the process
trace2: use system/global config for default trace2 settings
config: add read_very_early_config()
trace2: find exec-dir before trace2 initialization
trace2: add absolute elapsed time to start event
trace2: refactor setting process starting time
config: initialize opts structure in repo_read_config()
"make check-docs", "git help -a", etc. did not account for cases
where a particular build may deliberately omit some subcommands,
which has been corrected.
* js/misc-doc-fixes:
Turn `git serve` into a test helper
test-tool: handle the `-C <directory>` option just like `git`
check-docs: do not bother checking for legacy scripts' documentation
docs: exclude documentation for commands that have been excluded
check-docs: allow command-list.txt to contain excluded commands
help -a: do not list commands that are excluded from the build
Makefile: drop the NO_INSTALL variable
remote-testgit: move it into the support directory for t5801
If you have the memory to handle it, the ideal case is to run a single
spatch invocation with all of the source files. But the only way to do
so now is to pick an arbitrarily large batch size. Let's make "0" do
this, which is a little friendlier (and doesn't otherwise have a useful
meaning).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In our "make coccicheck" rule, we currently feed each source file to its
own individual invocation of spatch. This has a few downsides:
- it repeats any overhead spatch has for starting up and reading the
patch file
- any included header files may get processed from multiple
invocations. This is slow (we see the same header files multiple
times) and may produce a resulting patch with repeated hunks (which
cannot be applied without further cleanup)
Ideally we'd just invoke a single instance of spatch per rule-file and
feed it all source files. But spatch can be rather memory hungry when
run in this way. I measured the peak RSS going from ~90MB for a single
file to ~1900MB for all files. Multiplied by multiple rule files being
processed at the same time (for "make -j"), this can make things slower
or even cause them to fail (e.g., this is reported to happen on our
Travis builds).
Instead, let's provide a tunable knob. We'll leave the default at "1",
but it can be cranked up to "999" for maximum CPU/memory tradeoff, or
people can find points in between that serve their particular machines.
Here are a few numbers running a single rule via:
SIZES='1 4 16 999'
RULE=contrib/coccinelle/object_id.cocci
for i in $SIZES; do
make clean
/usr/bin/time -o $i.out --format='%e | %U | %S | %M' \
make $RULE.patch SPATCH_BATCH_SIZE=$i
done
for i in $SIZES; do
printf '%4d | %s\n' $i "$(cat $i.out)"
done
which yields:
1 | 97.73 | 93.38 | 4.33 | 100128
4 | 52.80 | 51.14 | 1.69 | 135204
16 | 35.82 | 35.09 | 0.76 | 284124
999 | 23.30 | 23.13 | 0.20 | 1903852
The implementation is done with xargs, which should be widely available;
it's in POSIX, we rely on it already in the test suite. And "coccicheck"
is really a developer-only tool anyway, so it's not a big deal if
obscure systems can't run it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On AIX, access(X_OK) may succeed when run as root even if the
execution isn't possible. This behavior is allowed by POSIX
which says:
... for a process with appropriate privileges, an implementation
may indicate success for X_OK even if execute permission is not
granted to any user.
It can lead hook programs to have their execution refused:
git commit -m content
fatal: cannot exec '.git/hooks/pre-commit': Permission denied
Add NEED_ACCESS_ROOT_HANDLER in order to use an access helper function.
It checks with stat if any executable flags is set when the current user
is root.
Signed-off-by: Clément Chigot <clement.chigot@atos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 33533975 ("Makefile: ask "ls-files" to list source files if
available", 2011-10-18), we optionally asked "ls-files" to list the
source files that ought to exist, as a faster approximation for
"find" on working tree files.
This works reasonably well, except that it ends up listing the same
path multiple times if the index is unmerged. Because the original
use of this construct was to name files to run etags over, and the
etags command happily takes the same filename multiple times without
causing any harm, there was no problem (other than perhaps spending
slightly more cycles, but who cares how fast the TAGS file gets
updated).
We however recently added a similar call to "ls-files" to list *.h
files, instead of using "find", in 92b88eba ("Makefile: use `git
ls-files` to list header files, if possible", 2019-03-04). In this
new use of "ls-files", the resulting list $(LIB_H) is used for,
among other things, generating the header files to run hdr-check
target, and the duplicate unfortunately becomes a true problem. It
causes $(MAKE) to notice that there are multiple %.hco targets and
complain.
Let the resulting list consumed by $(sort), which deduplicates,
to fix this.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dev support update.
* js/check-docs-exe:
check-docs: fix for setups where executables have an extension
check-docs: do not expect guide pages to correspond to commands
check-docs: really look at the documented commands again
docs: do not document the `git remote-testgit` command
docs: move gitremote-helpers into section 7
"git stash" rewritten in C.
* ps/stash-in-c: (28 commits)
tests: add a special setup where stash.useBuiltin is off
stash: optionally use the scripted version again
stash: add back the original, scripted `git stash`
stash: convert `stash--helper.c` into `stash.c`
stash: replace all `write-tree` child processes with API calls
stash: optimize `get_untracked_files()` and `check_changes()`
stash: convert save to builtin
stash: make push -q quiet
stash: convert push to builtin
stash: convert create to builtin
stash: convert store to builtin
stash: convert show to builtin
stash: convert list to builtin
stash: convert pop to builtin
stash: convert branch to builtin
stash: convert drop and clear to builtin
stash: convert apply to builtin
stash: mention options in `show` synopsis
stash: add tests for `git stash show` config
stash: rename test cases to be more descriptive
...
In order to run `rebase -i` without forking `rebase--interactive` it
will be convenient to have all the code from rebase--interactive.c in
rebase.c. This is a straight forward copy of the code from
rebase--interactive.c, it will be simplified slightly in the next
commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git serve` built-in was introduced in ed10cb952d (serve:
introduce git-serve, 2018-03-15) as a backend to serve Git protocol v2,
probably originally intended to be spawned by `git upload-pack`.
However, in the version that the protocol v2 patches made it into core
Git, `git upload-pack` calls the `serve()` function directly instead of
spawning `git serve`; The only reason in life for `git serve` to survive
as a built-in command is to provide a way to test the protocol v2
functionality.
Meaning that it does not even have to be a built-in that is installed
with end-user facing Git installations, but it can be a test helper
instead.
Let's make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the recent years, there has been a big push to convert more and more
of Git's commands that are implemented as scripts to built-ins written
in pure, portable C, for robustness, speed and portability.
One strategy that served us well is to convert those scripts
incrementally, starting by renaming the scripts to
`git-legacy-<command>`, then introducing a built-in that does nothing
else at first than checking the config setting `<command>.useBuiltin`
(which defaults to `false` at the outset) and handing off to the legacy
script if so asked.
Obviously, those `git-legacy-<command>` commands share the documentation
with the built-in `git-<command>`, and are not intended to be called
directly anyway. So let's not try to ensure that they are documented
separately from their built-in versions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When building with certain build options, some commands are excluded
from the build. For example, `git-credential-cache` is skipped when
building with `NO_UNIX_SOCKETS`.
Let's not build or package documentation for those excluded commands.
This issue was pointed out rightfully when running `make check-docs` on
Windows, where we do not yet have Unix sockets, and therefore the
`credential-cache` command is excluded (yet its documentation was built
and shipped).
Note: building the documentation via `make -C Documentation` leaves the
build system with no way to determine which commands have been
excluded. If called thusly, we gracefully fail to exclude their
documentation. Only when building the documentation via the top-level
Makefile will it get excluded properly, or after building
`Documentation/GIT-EXCLUDED-PROGRAMS` manually.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Among other things, the `check-docs` target ensures that
`command-list.txt` no longer contains commands that were dropped (or
that were never added in the first place).
To do so, it compares the list of commands from that file to the
commands listed in `$(ALL_COMMANDS)`.
However, some build options exclude commands from the latter. Fix the
target to handle this situation correctly by taking the just-introduced
`$(EXCLUDED_PROGRAMS)` into account.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When built with NO_CURL or with NO_UNIX_SOCKETS, some commands are
skipped from the build. It does not make sense to list them in the
output of `git help -a`, so let's just not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last user was just removed; There is no longer any need to carry it
around. Should we ever run into a need for it again, it is easy enough
to revert this commit.
It is unlikely, though, that we need `NO_INSTALL` again: as we saw with
the just-removed item, `git-remote-testgit`, we have better locations
to put executables and scripts that we do not want to install, e.g.
a subdirectory in `t/`, or `contrib/`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git to read the system and global config files for
default Trace2 settings. This allows system-wide Trace2 settings to
be installed and inherited to make it easier to manage a collection of
systems.
The original GIT_TR2* environment variables are loaded afterwards and
can be used to override the system settings.
Only the system and global config files are used. Repo and worktree
local config files are ignored. Likewise, the "-c" command line
arguments are also ignored. These limits are for performance reasons.
(1) For users not using Trace2, there should be minimal overhead to
detect that Trace2 is not enabled. In particular, Trace2 should not
allocate lots of otherwise unused data strucutres.
(2) For accurate performance measurements, Trace2 should be initialized
as early in the git process as possible, and before most of the normal
git process initialization (which involves discovering the .git directory
and reading a hierarchy of config files).
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `git-remote-testgit` script is really only used in
`t5801-remote-helpers.sh`. It does not even contain any `@@<MAGIC>@@`
placeholders that would need to be interpolated via `make
git-remote-testgit`.
Let's just move it to a new home, decluttering the top-level directory
and clarifying that this is just a test helper, not an official Git
command that we would want to ever support.
Suggested by Ævar Arnfjörð Bjarmason.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout" doing too many things is a source of confusion for many
users (and it even bites old timers sometimes). To remedy that, the
command will be split into two new ones: switch and restore. The good
old "git checkout" command is still here and will be until all (or most
of users) are sick of it.
See the new man page for the final design of switch. The actual
implementation though is still pretty much the same as "git checkout"
and not completely aligned with the man page. Following patches will
adjust their behavior to match the man page.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, for example, executables (must) have the extension `.exe`.
Our `check-docs` target was not prepared for that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to see what commands are listed in `command-list.txt` but
not installed, we currently include lines that refer to guides, e.g.
`gitattributes` or `gitcli`.
Let's not include those lines, as they are not referring to commands.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of the `check-docs` target, we verify that commands that are
documented are actually in the current list of commands to be built.
However, this logic broke in 5fafce0b78 (check-docs: get documented
command list from Makefile, 2012-08-08), when we tried to make the logic
safer by not looking at the files in the worktree, but at the list of
files to be generated in `Documentation/Makefile`. While this was the
right thing to do, it failed to accommodate for the fact that `make -C
Documentation/ print-man1`, unlike `ls Documentation/*.txt`, would *not*
print lines starting with the prefix `Documentation/`.
At long last, let's fix this.
Note: This went undetected due to a funny side effect of the
`ALL_PROGRAMS` variable starting with a space. That space, together with
the extra space we inserted before `$(ALL_PROGRAMS)` in the
case " $(ALL_PROGRAMS)" in
*" $$cmd ")
[...]
construct, is responsible that this case arm is used when `cmd` is empty
(which was clearly not intended to be the case).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
CFLAGS now can be tweaked when invoking Make while using
DEVELOPER=YesPlease; this did not work well before.
* ab/makefile-help-devs-more:
Makefile: allow for combining DEVELOPER=1 and CFLAGS="..."
Makefile: move the setting of *FLAGS closer to "include"
Makefile: Move *_LIBS assignment into its own section
Makefile: add/remove comments at top and tweak whitespace
Makefile: move "strip" assignment down from flags
Makefile: remove an out-of-date comment
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1dc library uses unaligned loads on platforms that support them.
This is normally what you'd want for performance, but it does cause
UBSan to complain when we compile with SANITIZE=undefined. Just like we
set -DNO_UNALIGNED_LOADS for our own code in that case, we should set
-DSHA1DC_FORCE_ALIGNED_ACCESS.
Of course that does nothing without pulling in the patches from sha1dc
to respect that define. So let's do that, too, updating both the
submodule link and our in-tree copy (from the same commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Makefile uses 'find' utility to enumerate all the *.h header
files, which is expensive on platforms with slow filesystems; it
now optionally uses "ls-files" if working within a repository,
which is a trick similar to how all sources are enumerated to run
ETAGS on.
* js/find-lib-h-with-ls-files-when-possible:
Makefile: use `git ls-files` to list header files, if possible
The set of header files used by "make hdr-check" unconditionally
included sha256/gcrypt.h, even when it is not used, causing the
make target to fail. We now skip it when GCRYPT_SHA256 is not in
use.
* rj/hdr-check-gcrypt-fix:
Makefile: fix 'hdr-check' when GCRYPT not installed
We recently converted the `git stash` command from Unix shell scripts
to builtins.
Let's end users a way out when they discover a bug in the
builtin command: `stash.useBuiltin`.
As the file name `git-stash` is already in use, let's rename the
scripted backend to `git-legacy-stash`.
To make the test suite pass with `stash.useBuiltin=false`, this commit
also backports rudimentary support for `-q` (but only *just* enough
to appease the test suite), and adds a super-ugly hack to force exit
code 129 for `git stash -h`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old shell script `git-stash.sh` was removed and replaced
entirely by `builtin/stash.c`. In order to do that, `create` and
`push` were adapted to work without `stash.sh`. For example, before
this commit, `git stash create` called `git stash--helper create
--message "$*"`. If it called `git stash--helper create "$@"`, then
some of these changes wouldn't have been necessary.
This commit also removes the word `helper` since now stash is
called directly and not by a shell script.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a builtin helper for performing stash commands. Converting
all at once proved hard to review, so starting with just apply
lets conversion get started without the other commands being
finished.
The helper is being implemented as a drop in replacement for
stash so that when it is complete it can simply be renamed and
the shell script deleted.
Delete the contents of the apply_stash shell function and replace
it with a call to stash--helper apply until pop is also
converted.
Signed-off-by: Joel Teichroeb <joel@teichroeb.net>
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the GCRYPT_SHA256 build variable is not set, then the 'hdr-check'
target complains about the missing <gcrypt.h> header file. Add the
'sha256/gcrypt.h' header file to the exception list, if the build
variable is not defined. While here, replace the 'xdiff%' filter
pattern with 'xdiff/%' (and similarly for the compat pattern) since
the original pattern inadvertently excluded the 'xdiff-interface.h'
header.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In d85b0dff72 (Makefile: use `find` to determine static header
dependencies, 2014-08-25), we switched from a static list of header
files to a dynamically-generated one, asking `find` to enumerate them.
Back in those days, we did not use `$(LIB_H)` by default, and many a
`make` implementation seems smart enough not to run that `find` command
in that case, so it was deemed okay to run `find` for special targets
requiring this macro.
However, as of ebb7baf02f (Makefile: add a hdr-check target,
2018-09-19), $(LIB_H) is part of a global rule and therefore must be
expanded. Meaning: this `find` command has to be run upon every
`make` invocation. In the presence of many a worktree, this can tax the
developers' patience quite a bit.
Even in the absence of worktrees or other untracked files and
directories, the cost of I/O to generate that list of header files is
simply a lot larger than a simple `git ls-files` call.
Therefore, just like in 335339758c (Makefile: ask "ls-files" to list
source files if available, 2011-10-18), we now prefer to use `git
ls-files` to enumerate the header files to enumerating them via `find`,
falling back to the latter if the former failed (which would be the case
e.g. in a worktree that was extracted from a source .tar file rather
than from a clone of Git's sources).
This has one notable consequence: we no longer include `command-list.h`
in `LIB_H`, as it is a generated file, not a tracked one, but that is
easily worked around. Of the three sites that use `LIB_H`, two
(`LOCALIZED_C` and `CHK_HDRS`) already handle generated headers
separately. In the third, the computed-dependency fallback, we can just
add in a reference to $(GENERATED_H).
Likewise, we no longer include not-yet-tracked header files in `LIB_H`.
Given the speed improvements, these consequences seem a comparably small
price to pay.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since the DEVELOPER=1 facility introduced there's been no way to
have custom CFLAGS (e.g. CFLAGS="-O0 -g -ggdb3") while still
benefiting from the set of warnings and assertions DEVELOPER=1
enables.
This is because the semantics of variables in the Makefile are such
that the user setting CFLAGS overrides anything we set, including what
we're doing in config.mak.dev[1].
So let's introduce a "DEVELOPER_CFLAGS" variable in config.mak.dev and
add it to ALL_CFLAGS. Before this the ALL_CFLAGS variable
would (basically, there's some nuance we won't go into) be set to:
$(CPPFLAGS) [$(CFLAGS) *or* $(CFLAGS) in config.mak.dev] $(BASIC_CFLAGS) $(EXTRA_CPPFLAGS)
But will now be:
$(DEVELOPER_CFLAGS) $(CPPFLAGS) $(CFLAGS) $(BASIC_CFLAGS) $(EXTRA_CPPFLAGS)
The reason for putting DEVELOPER_CFLAGS first is to allow for
selectively overriding something DEVELOPER=1 brings in. On both GCC
and Clang later settings override earlier ones. E.g. "-Wextra
-Wno-extra" will enable no "extra" warnings, but not if those two
arguments are reversed.
Examples of things that weren't possible before, but are now:
# Use -O0 instead of -O2 for less painful debuggng
DEVELOPER=1 CFLAGS="-O0 -g"
# DEVELOPER=1 plus -Wextra, but disable some of the warnings
DEVELOPER=1 DEVOPTS="no-error extra-all" CFLAGS="-O0 -g -Wno-unused-parameter"
The reason for the patches leading up to this one re-arranged the
various *FLAGS assignments and includes is just for readability. The
Makefile supports assignments out of order, e.g.:
$ cat Makefile
X = $(A) $(B) $(C)
A = A
B = B
include c.mak
all:
@echo $(X)
$ cat c.mak
C=C
$ make
A B C
So we could have gotten away with the much smaller change of changing
"CFLAGS" in config.mak.dev to "DEVELOPER_CFLAGS" and adding that to
ALL_CFLAGS earlier in the Makefile "before" the config.mak.*
includes. But I think it's more readable to use variables "after"
they're included.
1. https://www.gnu.org/software/make/manual/html_node/Overriding.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the setting of variables like CFLAGS down past settings like
"prefix" and default programs like "TAR" to just before we do the
include from "config.mak.*".
There's no functional changes here yet, but move note that
"ALL_CFLAGS" and "ALL_LDFLAGS" are moved below the include. A
follow-up change will tweak those depending on a variable set in
config.mak.dev.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the only other non-program assignment in the previous list is
PTHREAD_CFLAGS, which'll be moved elsewhere in a follow-up change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top of the Makfile is mostly separated into logical steps like set
default configuration, set programs etc., but there's some deviation
from that.
Let's add mostly comments where they're missing, remove those that
don't add anything. The whitespace tweaking makes subsequent patches
smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the assignment of the "STRIP" variable down to where we're
setting variables with the names of other programs.
For consistency with those use "=" for the assignment instead of
"?=". I can't imagine why this would need to be different than the
rest, and 4dc00021f7 ("Makefile: add 'strip' target", 2006-01-12)
which added it doesn't provide an explanation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a comment referring to a caveat that hasn't been applicable
since 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23).
At the time of 8d7f586f13 ("Git.pm: Support for perl/ being built by a
different compiler", 2006-06-25) some of the code in perl would be
built by a C compiler, but support for that went away a few months
later in 18b0fc1ce1 discussed above.
Since my 20d2a30f8f ("Makefile: replace perl/Makefile.PL with simple
make rules", 2017-12-10) the perl/ directory doesn't even have its own
build process.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new unified tracing facility for git. The eventual intent is to
replace the current trace_printf* and trace_performance* routines with a
unified set of git_trace2* routines.
In addition to the usual printf-style API, trace2 provides higer-level
event verbs with fixed-fields allowing structured data to be written.
This makes post-processing and analysis easier for external tools.
Trace2 defines 3 output targets. These are set using the environment
variables "GIT_TR2", "GIT_TR2_PERF", and "GIT_TR2_EVENT". These may be
set to "1" or to an absolute pathname (just like the current GIT_TRACE).
* GIT_TR2 is intended to be a replacement for GIT_TRACE and logs command
summary data.
* GIT_TR2_PERF is intended as a replacement for GIT_TRACE_PERFORMANCE.
It extends the output with columns for the command process, thread,
repo, absolute and relative elapsed times. It reports events for
child process start/stop, thread start/stop, and per-thread function
nesting.
* GIT_TR2_EVENT is a new structured format. It writes event data as a
series of JSON records.
Calls to trace2 functions log to any of the 3 output targets enabled
without the need to call different trace_printf* or trace_performance*
routines.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code and tests assume that the system supplied iconv() would
always use BOM in its output when asked to encode to UTF-16 (or
UTF-32), but apparently some implementations output big-endian
without BOM. A compile-time knob has been added to help such
systems (e.g. NonStop) to add BOM to the output to increase
portability.
* bc/utf16-portability-fix:
utf8: handle systems that don't write BOM for UTF-16
On various BSD's, fileno(fp) is implemented as a macro that directly
accesses the fields in the FILE * object, which breaks a function that
accepts a "void *fp" parameter and calls fileno(fp) and expect it to
work.
Work it around by adding a compile-time knob FILENO_IS_A_MACRO that
inserts a real helper function in the middle of the callchain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When serializing UTF-16 (and UTF-32), there are three possible ways to
write the stream. One can write the data with a BOM in either big-endian
or little-endian format, or one can write the data without a BOM in
big-endian format.
Most systems' iconv implementations choose to write it with a BOM in
some endianness, since this is the most foolproof, and it is resistant
to misinterpretation on Windows, where UTF-16 and the little-endian
serialization are very common. For compatibility with Windows and to
avoid accidental misuse there, Git always wants to write UTF-16 with a
BOM, and will refuse to read UTF-16 without it.
However, musl's iconv implementation writes UTF-16 without a BOM,
relying on the user to interpret it as big-endian. This causes t0028 and
the related functionality to fail, since Git won't read the file without
a BOM.
Add a Makefile and #define knob, ICONV_OMITS_BOM, that can be set if the
iconv implementation has this behavior. When set, Git will write a BOM
manually for UTF-16 and UTF-32 and then force the data to be written in
UTF-16BE or UTF-32BE. We choose big-endian behavior here because the
tests use the raw "UTF-16" encoding, which will be big-endian when the
implementation requires this knob to be set.
Update the tests to detect this case and write test data with an added
BOM if necessary. Always write the BOM in the tests in big-endian
format, since all iconv implementations that omit a BOM must use
big-endian serialization according to the Unicode standard.
Preserve the existing behavior for systems which do not have this knob
enabled, since they may use optimized implementations, including
defaulting to the native endianness, which may improve performance.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use of the sparse tool got easier to customize from the command
line to help developers.
* rj/sparse-flags:
Makefile: improve SPARSE_FLAGS customisation
config.mak.uname: remove obsolete SPARSE_FLAGS setting
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
The codepath to read from the commit-graph file attempted to read
past the end of it when the file's table-of-contents was corrupt.
* js/commit-graph-chunk-table-fix:
Makefile: correct example fuzz build
commit-graph: fix buffer read-overflow
commit-graph, fuzz: add fuzzer for commit-graph
In order to enable greater user customisation of the SPARSE_FLAGS
variable, we introduce a new SP_EXTRA_FLAGS variable to use for
target specific settings. Without using the new variable, setting
the SPARSE_FLAGS on the 'make' command-line would also override the
value set by the target-specific rules in the Makefile (effectively
making them useless). Also, this enables the SP_EXTRA_FLAGS to be
used in the future for any other internal customisations, such as
for some platform specific values.
In addition, we initialise the SPARSE_FLAGS to the default (empty)
value using a conditional assignment (?=). This allows SPARSE_FLAGS
to be set from the environment as well as from the command-line.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".
* bc/sha-256:
hash: add an SHA-256 implementation using OpenSSL
sha256: add an SHA-256 implementation using libgcrypt
Add a base implementation of SHA-256 support
commit-graph: convert to using the_hash_algo
t/helper: add a test helper to compute hash speed
sha1-file: add a constant for hash block size
t: make the sha1 test-tool helper generic
t: add basic tests for our SHA-1 implementation
cache: make hashcmp and hasheq work with larger hashes
hex: introduce functions to print arbitrary hashes
sha1-file: provide functions to look up hash algorithms
sha1-file: rename algorithm to "sha1"
Sometimes there are test failures in the 'pu' branch. This
is somewhat expected for a branch that takes the very latest
topics under development, and those sometimes have semantic
conflicts that only show up during test runs. This also can
happen when running the test suite with different GIT_TEST_*
environment variables that interact in unexpected ways
This causes a problem for the test coverage reports, as
the typical 'make coverage-test coverage-report' run halts
at the first failed test. If that test is early in the
suite, then many valuable tests are not exercising the code
and the coverage report becomes noisy with false positives.
Add a new 'coverage-prove' target to the Makefile,
modeled after the 'coverage-test' target. This compiles
the source using the coverage flags, then runs the test
suite using the 'prove' tool. Since the coverage
machinery is not thread-safe, enforce that the tests
are run in sequence by appending '-j1' to GIT_PROVE_OPTS.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fact that Git's test suite is implemented in Unix shell script that
is as portable as we can muster, combined with the fact that Unix shell
scripting is foreign to Windows (and therefore has to be emulated),
results in pretty abysmal speed of the test suite on that platform, for
pretty much no other reason than that language choice.
For comparison: while the Linux build & test is typically done within
about 8 minutes, the Windows build & test typically lasts about 80
minutes in Azure Pipelines.
To help with that, let's use the Azure Pipeline feature where you can
parallelize jobs, make jobs depend on each other, and pass artifacts
between them.
The tests are distributed using the following heuristic: listing all
test scripts ordered by size in descending order (as a cheap way to
estimate the overall run time), every Nth script is run (where N is the
total number of parallel jobs), starting at the index corresponding to
the parallel job. This slicing is performed by a new function that is
added to the `test-tool`.
To optimize the overall runtime of the entire Pipeline, we need to move
the Windows jobs to the beginning (otherwise there would be a very
decent chance for the Pipeline to be run only the Windows build, while
all the parallel Windows test jobs wait for this single one).
We use Azure Pipelines Artifacts for both the minimal Git for Windows
SDK as well as the built executables, as deduplication and caching close
to the agents makes that really fast. For comparison: while downloading
and unpacking the minimal Git for Windows SDK via PowerShell takes only
one minute (down from anywhere between 2.5 to 7 when using a shallow
clone), uploading it as Pipeline Artifact takes less than 30s and
downloading and unpacking less than 20s (sometimes even as little as
only twelve seconds).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will come in handy when publishing the results of Git's test suite
during an automated Azure DevOps run.
Note: we need to make extra sure that invalid UTF-8 encoding is turned
into valid UTF-8 (using the Replacement Character, \uFFFD) because
t9902's trace contains such invalid byte sequences, and the task in the
Azure Pipeline that uploads the test results would refuse to do anything
if it was asked to parse an .xml file with invalid UTF-8 in it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment explaining how to build the fuzzers was broken in
927c77e7d4 ("Makefile: use FUZZ_CXXFLAGS for linking fuzzers",
2018-11-14).
When building fuzzers, all .c files must be compiled with coverage
tracing enabled. This is not possible when using only FUZZ_CXXFLAGS, as
that flag is only applied to the fuzzers themselves. Switching back to
CFLAGS fixes the issue.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break load_commit_graph_one() into a new function, parse_commit_graph().
The latter function operates on arbitrary buffers, which makes it
suitable as a fuzzing target. Since parse_commit_graph() is only called
by load_commit_graph_one() (and the fuzzer described below), we omit
error messages that would be duplicated by the caller.
Adds fuzz-commit-graph.c, which provides a fuzzing entry point
compatible with libFuzzer (and possibly other fuzzing engines).
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A coding convention around the Coccinelle semantic patches to have
two classes to ease code migration process has been proposed and
its support has been added to the Makefile.
* sb/cocci-pending:
coccicheck: introduce 'pending' semantic patches
Update the "test installed Git" mode of our test suite to work better.
* js/test-git-installed:
tests: explicitly use `git.exe` on Windows
tests: do not require Git to be built when testing an installed Git
t/lib-gettext: test installed git-sh-i18n if GIT_TEST_INSTALLED is set
tests: respect GIT_TEST_INSTALLED when initializing repositories
tests: fix GIT_TEST_INSTALLED's PATH to include t/helper/
Our testing framework uses a special i18n "poisoned localization"
feature to find messages that ought to stay constant but are
incorrectly marked to be translated. This feature has been made
into a runtime option (it used to be a compile-time option).
* ab/dynamic-gettext-poison:
Makefile: ease dynamic-gettext-poison transition
i18n: make GETTEXT_POISON a runtime option
The build procedure to link for fuzzing test has been made
customizable with a new Makefile variable.
* js/fuzz-cxxflags:
Makefile: use FUZZ_CXXFLAGS for linking fuzzers
The way -lcurl library gets linked has been simplified by taking
advantage of the fact that we can just ask curl-config command how.
* jk/curl-ldflags:
build: link with curl-defined linker flags
The codebase has been cleaned up to reduce "#ifndef NO_PTHREADS".
* nd/pthreads:
Clean up pthread_create() error handling
read-cache.c: initialize copy_len to shut up gcc 8
read-cache.c: reduce branching based on HAVE_THREADS
read-cache.c: remove #ifdef NO_PTHREADS
pack-objects: remove #ifdef NO_PTHREADS
preload-index.c: remove #ifdef NO_PTHREADS
grep: clean up num_threads handling
grep: remove #ifdef NO_PTHREADS
attr.c: remove #ifdef NO_PTHREADS
name-hash.c: remove #ifdef NO_PTHREADS
index-pack: remove #ifdef NO_PTHREADS
send-pack.c: move async's #ifdef NO_PTHREADS back to run-command.c
run-command.h: include thread-utils.h instead of pthread.h
thread-utils: macros to unconditionally compile pthreads API
OSS-Fuzz requires C++-specific flags to link fuzzers. Passing these in
CFLAGS causes lots of build warnings. Using separate FUZZ_CXXFLAGS
avoids this.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, when we refer to `/an/absolute/path/to/git`, it magically
resolves `git.exe` at that location. Except if something of the name
`git` exists next to that `git.exe`. So if we call `$BUILD_DIR/git`, it
will find `$BUILD_DIR/git.exe` *only* if there is not, say, a directory
called `$BUILD_DIR/git`.
Such a directory, however, exists in Git for Windows when building with
Visual Studio (our Visual Studio project generator defaults to putting
the build files into a directory whose name is the base name of the
corresponding `.exe`).
In the bin-wrappers/* scripts, we already take pains to use `git.exe`
rather than `git`, as this could pick up the wrong thing on Windows
(i.e. if there exists a `git` file or directory in the build directory).
Now we do the same in the tests' start-up code.
This also helps when testing an installed Git, as there might be even
more likely some stray file or directory in the way.
Note: the only way we can record whether the `.exe` suffix is by writing
it to the `GIT-BUILD-OPTIONS` file and sourcing it at the beginning of
`t/test-lib.sh`. This is not a requirement introduced by this patch, but
we move the call to be able to use the `$X` variable that holds the file
extension, if any.
Note also: the many, many calls to `git this` and `git that` are
unaffected, as the regular PATH search will find the `.exe` files on
Windows (and not be confused by a directory of the name `git` that is
in one of the directories listed in the `PATH` variable), while
`/path/to/git` would not, per se, know that it is looking for an
executable and happily prefer such a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have OpenSSL routines available for SHA-1, so add routines
for SHA-256 as well.
On a Core i7-6600U, this SHA-256 implementation compares favorably to
the SHA1DC SHA-1 implementation:
SHA-1: 157 MiB/s (64 byte chunks); 337 MiB/s (16 KiB chunks)
SHA-256: 165 MiB/s (64 byte chunks); 408 MiB/s (16 KiB chunks)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Generally, one gets better performance out of cryptographic routines
written in assembly than C, and this is also true for SHA-256. In
addition, most Linux distributions cannot distribute Git linked against
OpenSSL for licensing reasons.
Most systems with GnuPG will also have libgcrypt, since it is a
dependency of GnuPG. libgcrypt is also faster than the SHA1DC
implementation for messages of a few KiB and larger.
For comparison, on a Core i7-6600U, this implementation processes 16 KiB
chunks at 355 MiB/s while SHA1DC processes equivalent chunks at 337
MiB/s.
In addition, libgcrypt is licensed under the LGPL 2.1, which is
compatible with the GPL. Add an implementation of SHA-256 that uses
libgcrypt.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SHA-1 is weak and we need to transition to a new hash function. For
some time, we have referred to this new function as NewHash. Recently,
we decided to pick SHA-256 as NewHash. The reasons behind the choice of
SHA-256 are outlined in the thread starting at [1] and in the commit
history for the hash function transition document.
Add a basic implementation of SHA-256 based off libtomcrypt, which is in
the public domain. Optimize it and restructure it to meet our coding
standards. Pull in the update and final functions from the SHA-1 block
implementation, as we know these function correctly with all compilers.
This implementation is slower than SHA-1, but more performant
implementations will be introduced in future commits.
Wire up SHA-256 in the list of hash algorithms, and add a test that the
algorithm works correctly.
Note that with this patch, it is still not possible to switch to using
SHA-256 in Git. Additional patches are needed to prepare the code to
handle a larger hash algorithm and further test fixes are needed.
[1] https://public-inbox.org/git/20180609224913.GC38834@genre.crustytoothpaste.net/
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a utility (which is less for the testsuite and more for developers)
that can compute hash speeds for whatever hash algorithms are
implemented. This allows developers to test their personal systems to
determine the performance characteristics of various algorithms.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we're going to have multiple hash algorithms to test, it makes
sense to share as much of the test code as possible. Convert the sha1
helper for the test-tool to be generic and move it out into its own
module. This will allow us to share most of this code with our NewHash
implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX specifies that <poll.h> is the correct header for poll(2)
whereas <sys/poll.h> is only needed for some old libc.
Let's follow the POSIX way by default.
This effectively eliminates musl's warning:
warning redirecting incorrect #include <sys/poll.h> to <poll.h>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach `make coccicheck` to avoid patches named "*.pending.cocci" and
handle them separately in a new `make coccicheck-pending` instead.
This means that we can separate "critical" patches from "FYI" patches.
The former target can continue causing Travis to fail its static
analysis job, while the latter can let us keep an eye on ongoing
(pending) transitions without them causing too much fallout.
Document the intended use-cases around these two targets.
As the process around the pending patches is not yet fully explored,
leave that out.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Based-on-work-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
Split the overly large Documentation/config.txt file into million
little pieces. This potentially allows each individual piece
included into the manual page of the command it affects more easily.
* nd/config-split: (81 commits)
config.txt: remove config/dummy.txt
config.txt: move worktree.* to a separate file
config.txt: move web.* to a separate file
config.txt: move versionsort.* to a separate file
config.txt: move user.* to a separate file
config.txt: move url.* to a separate file
config.txt: move uploadpack.* to a separate file
config.txt: move uploadarchive.* to a separate file
config.txt: move transfer.* to a separate file
config.txt: move tag.* to a separate file
config.txt: move submodule.* to a separate file
config.txt: move stash.* to a separate file
config.txt: move status.* to a separate file
config.txt: move splitIndex.* to a separate file
config.txt: move showBranch.* to a separate file
config.txt: move sequencer.* to a separate file
config.txt: move sendemail-config.txt to config/
config.txt: move reset.* to a separate file
config.txt: move rerere.* to a separate file
config.txt: move repack.* to a separate file
...
Earlier we made the entire build to fail when GETTEXT_POISON=Yes is
given to make, to notify those who did not notice that text poisoning
is now a runtime behaviour.
It turns out that this is too irritating for those who need to build
and test different versions of Git that cross the boundary between
history with and without this topic to switch between two
environment variables. Demote the error to a warning, so that you
can say something like
make GETTEXT_POISON=Yes GIT_TEST_GETTEXT_POISON=Yes test
during the transition period, without having to worry about whether
exact version you are testing has or does not have this topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the GETTEXT_POISON compile-time + runtime GIT_GETTEXT_POISON
test parameter to only be a GIT_TEST_GETTEXT_POISON=<non-empty?>
runtime parameter, to be consistent with other parameters documented
in "Running tests with special setups" in t/README.
When I added GETTEXT_POISON in bb946bba76 ("i18n: add GETTEXT_POISON
to simulate unfriendly translator", 2011-02-22) I was concerned with
ensuring that the _() function would get constant folded if NO_GETTEXT
was defined, and likewise that GETTEXT_POISON would be compiled out
unless it was defined.
But as the benchmark in my [1] shows doing a one-off runtime
getenv("GIT_TEST_[...]") is trivial, and since GETTEXT_POISON was
originally added the GIT_TEST_* env variables have become the common
idiom for turning on special test setups.
So change GETTEXT_POISON to work the same way. Now the
GETTEXT_POISON=YesPlease compile-time option is gone, and running the
tests with GIT_TEST_GETTEXT_POISON=[YesPlease|] can be toggled on/off
without recompiling.
This allows for conditionally amending tests to test with/without
poison, similar to what 859fdc0c3c ("commit-graph: define
GIT_TEST_COMMIT_GRAPH", 2018-08-29) did for GIT_TEST_COMMIT_GRAPH. Do
some of that, now we e.g. always run the t0205-gettext-poison.sh test.
I did enough there to remove the GETTEXT_POISON prerequisite, but its
inverse C_LOCALE_OUTPUT is still around, and surely some tests using
it can be converted to e.g. always set GIT_TEST_GETTEXT_POISON=.
Notes on the implementation:
* We still compile a dedicated GETTEXT_POISON build in Travis
CI. Perhaps this should be revisited and integrated into the
"linux-gcc" build, see ae59a4e44f ("travis: run tests with
GIT_TEST_SPLIT_INDEX", 2018-01-07) for prior art in that area. Then
again maybe not, see [2].
* We now skip a test in t0000-basic.sh under
GIT_TEST_GETTEXT_POISON=YesPlease that wasn't skipped before. This
test relies on C locale output, but due to an edge case in how the
previous implementation of GETTEXT_POISON worked (reading it from
GIT-BUILD-OPTIONS) wasn't enabling poison correctly. Now it does,
and needs to be skipped.
* The getenv() function is not reentrant, so out of paranoia about
code of the form:
printf(_("%s"), getenv("some-env"));
call use_gettext_poison() in our early setup in git_setup_gettext()
so we populate the "poison_requested" variable in a codepath that's
won't suffer from that race condition.
* We error out in the Makefile if you're still saying
GETTEXT_POISON=YesPlease to prompt users to change their
invocation.
* We should not print out poisoned messages during the test
initialization itself to keep it more readable, so the test library
hides the variable if set in $GIT_TEST_GETTEXT_POISON_ORIG during
setup. See [3].
See also [4] for more on the motivation behind this patch, and the
history of the GETTEXT_POISON facility.
1. https://public-inbox.org/git/871s8gd32p.fsf@evledraar.gmail.com/
2. https://public-inbox.org/git/20181102163725.GY30222@szeder.dev/
3. https://public-inbox.org/git/20181022202241.18629-2-szeder.dev@gmail.com/
4. https://public-inbox.org/git/878t2pd6yu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git.rc is compiled into git.res, the result is actually dependent
on the architecture. That is, you cannot simply link a 32-bit git.res
into a 64-bit git.exe.
Therefore, to allow 32-bit and 64-bit builds in the same directory, we
let git.res depend on GIT-PREFIX so that it gets recompiled when
compiling for a different architecture (this works because the exec path
changes based on the architecture: /mingw32/libexec/git-core for 32-bit
and /mingw64/libexec/git-core for 64-bit).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adjusting the build process to rely more on curl-config to populate
linker flags instead of manually populating flags based off detected
features.
Originally, a configure-invoked build would check for SSL-support in the
target curl library. If enabled, NEEDS_SSL_WITH_CURL would be set and
used in the Makefile to append additional libraries to link against. As
for systems building solely with make, the defines NEEDS_IDN_WITH_CURL
and NEEDS_SSL_WITH_CURL could be set to indirectly enable respective
linker flags. Since both configure.ac and Makefile already rely on
curl-config utility to provide curl-related build information, adjusting
the respective assets to populate required linker flags using the
utility (unless explicitly configured).
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
Rewrite of the "rebase" machinery in C.
* pk/rebase-in-c:
builtin/rebase: support running "git rebase <upstream>"
rebase: refactor common shell functions into their own file
rebase: start implementing it as a builtin
Add a test tool to exercise config_from_gitmodules(), in particular for
the case of nested submodules.
Add also a test to document that reading the submoudles config of nested
submodules does not work yet when the .gitmodules file is not in the
working tree but it still in the index.
This is because the git API does not always make it possible access the
object store of an arbitrary repository (see get_oid() usage in
config_from_gitmodules()).
When this git limitation gets fixed the aforementioned use case will be
supported too.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When built with NO_PTHREADS, the macros are used make the code build
even though pthreads header and library may be missing. The code can
still have different code paths for no threads support with
HAVE_THREADS variable.
There are of course impacts on no-pthreads builds:
- data structure may get slightly bigger because all the mutexes and
pthread_t are present (as an int)
- code execution is not impacted much. Locking (in hot path) is
no-op. Other wrapper function calls really should not matter much.
- the binary size grows bigger because of threaded code. But at least
on Linux this does not matter, if some code is not executed, it's
not mapped in memory.
This is a preparation step to remove "#ifdef NO_PTHREADS" in the code
mostly because of maintainability. As Jeff put it
> it's probably OK to stop thinking of it as "non-threaded platforms
> are the default and must pay zero cost" and more as "threaded
> platforms are the default, and non-threaded ones are OK to pay a
> small cost as long as they still work".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.txt is going to be broken down in smaller pieces and put under
Documentation/config directory. Update build rules to take these files
into account.
A dummy file is added to make sure wildcard expansion is predictable
(depending on shell setting it could expand to nothing or becomes a
path if config directory is empty). The file will be deleted once the
move is over.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An experiment to fuzz test a few areas, hopefully we can gain more
coverage to various areas.
* js/fuzzer:
fuzz: add fuzz testing for packfile indices.
fuzz: add basic fuzz testing target.
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
Breaks the majority of check_packed_git_idx() into a separate function,
load_idx(). The latter function operates on arbitrary buffers, which
makes it suitable as a fuzzing test target.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fuzz-pack-headers.c provides a fuzzing entry point compatible with
libFuzzer (and possibly other fuzzing engines).
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test helper binaries clean-up.
* nd/test-tool:
Makefile: add a hint about TEST_BUILTINS_OBJS
t/helper: merge test-dump-fsmonitor into test-tool
t/helper: merge test-parse-options into test-tool
t/helper: merge test-pkt-line into test-tool
t/helper: merge test-dump-untracked-cache into test-tool
t/helper: keep test-tool command list sorted
This moves the rebase--helper modes still used by
git-rebase--preserve-merges.sh (`--shorten-ids`, `--expand-ids`,
`--check-todo-list`, `--rearrange-squash` and `--add-exec-commands`) to
rebase--interactive.c.
git-rebase--preserve-merges.sh is modified accordingly, and
rebase--helper.c is removed as it is useless now.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes git-rebase--interactive.sh, as its functionnality has been
replaced by git-rebase--interactive2.
git-rebase--interactive2.c is then renamed to git-rebase--interactive.c.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites the part of interactive rebase which initializes the
basic state, make the script and complete the action, as a buitin, named
git-rebase--interactive2 for now. Others modes (`--continue`,
`--edit-todo`, etc.) will be rewritten in the next commit.
git-rebase--interactive.sh is modified to call git-rebase--interactive2
instead of git-rebase--helper.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename TEST_GIT_INDEX_VERSION to GIT_TEST_INDEX_VERSION for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further fix for O_APPEND emulation on Windows
* js/mingw-o-append:
mingw: fix mingw_open_append to work with named pipes
t0051: test GIT_TRACE to a windows named pipe
Commit ef3ca95475 ("Add missing includes and forward declarations",
2018-08-15) resulted from the author employing a manual method to
create a C file consisting of a pair of pre-processor #include
lines (for 'git-compat-util.h' and a given toplevel header), and
fixing any resulting compiler errors or warnings.
Add a Makefile target to automate this process. This implementation
relies on the '-include' and '-xc' arguments to the 'gcc' and 'clang'
compilers, which allows us to effectively create the required C
compilation unit on-the-fly. This limits the portability of this
solution to those systems which have such a compiler.
The new 'hdr-check' target can be used to check most header files in
the project (for various reasons, the 'compat' and 'xdiff' directories
are not included). Also, note that individual header files can be
checked directly using the '.hco' extension (read: Hdr-Check Object)
like so:
$ make config.hco
HDR config.h
$
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Lift code from GitHub to restrict delta computation so that an
object that exists in one fork is not made into a delta against
another object that does not appear in the same forked repository.
* cc/delta-islands:
pack-objects: move 'layer' into 'struct packing_data'
pack-objects: move tree_depth into 'struct packing_data'
t5320: tests for delta islands
repack: add delta-islands support
pack-objects: add delta-islands support
pack-objects: refactor code into compute_layer_order()
Add delta-islands.{c,h}
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
When there are too many packfiles in a repository (which is not
recommended), looking up an object in these would require
consulting many pack .idx files; a new mechanism to have a single
file that consolidates all of these .idx files is introduced.
* ds/multi-pack-index: (32 commits)
pack-objects: consider packs in multi-pack-index
midx: test a few commands that use get_all_packs
treewide: use get_all_packs
packfile: add all_packs list
midx: fix bug that skips midx with alternates
midx: stop reporting garbage
midx: mark bad packed objects
multi-pack-index: store local property
multi-pack-index: provide more helpful usage info
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
...
Create a test-tool helper to create the server side of
a windows named pipe, wait for a client connection, and
copy data written to the pipe to stdout.
Create t0051 test to route GIT_TRACE output of a command
to a named pipe using the above test-tool helper.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script uses Documentation/config.txt as input for "git help
--config" and "git config" completion but it misses the fact that
config.txt includes other txt files. Include all *config.txt as input
when scanning for config keys. This could produce false positives, but
as long as we stick to the blah-config.txt naming convention, we
should be ok.
While at there, move diff.* from config.txt to diff-config.txt where
all other diff config keys are.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ds/multi-pack-index: (23 commits)
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
midx: sort and deduplicate objects from packfiles
midx: read pack names into array
multi-pack-index: write pack names in chunk
multi-pack-index: read packfile list
packfile: generalize pack directory list
t5319: expand test data
multi-pack-index: load into memory
midx: write header information to lockfile
multi-pack-index: add 'write' verb
...
"git tbdiff" that lets us compare individual patches in two
iterations of a topic has been rewritten and made into a built-in
command.
* js/range-diff: (21 commits)
range-diff: use dim/bold cues to improve dual color mode
range-diff: make --dual-color the default mode
range-diff: left-pad patch numbers
completion: support `git range-diff`
range-diff: populate the man page
range-diff --dual-color: skip white-space warnings
range-diff: offer to dual-color the diffs
diff: add an internal option to dual-color diffs of diffs
color: add the meta color GIT_COLOR_REVERSE
range-diff: use color for the commit pairs
range-diff: add tests
range-diff: do not show "function names" in hunk headers
range-diff: adjust the output of the commit pairs
range-diff: suppress the diff headers
range-diff: indent the diffs just like tbdiff
range-diff: right-trim commit messages
range-diff: also show the diff between patches
range-diff: improve the order of the shown commits
range-diff: first rudimentary implementation
Introduce `range-diff` to compare iterations of a topic branch
...
Hosting providers that allow users to "fork" existing
repos want those forks to share as much disk space as
possible.
Alternates are an existing solution to keep all the
objects from all the forks into a unique central repo,
but this can have some drawbacks. Especially when
packing the central repo, deltas will be created
between objects from different forks.
This can make cloning or fetching a fork much slower
and much more CPU intensive as Git might have to
compute new deltas for many objects to avoid sending
objects from a different fork.
Because the inefficiency primarily arises when an
object is deltified against another object that does
not exist in the same fork, we partition objects into
sets that appear in the same fork, and define
"delta islands". When finding delta base, we do not
allow an object outside the same island to be
considered as its base.
So "delta islands" is a way to store objects from
different forks in the same repo and packfile without
having deltas between objects from different forks.
This patch implements the delta islands mechanism in
"delta-islands.{c,h}", but does not yet make use of it.
A few new fields are added in 'struct object_entry'
in "pack-objects.h" though.
The documentation will follow in a patch that actually
uses delta islands in "builtin/pack-objects.c".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the way we use Coccinelle to find out-of-style code that
need to be modernised.
* sg/coccicheck-updates:
coccinelle: extract dedicated make target to clean Coccinelle's results
coccinelle: put sane filenames into output patches
coccinelle: exclude sha1dc source files from static analysis
coccinelle: use $(addsuffix) in 'coccicheck' make target
coccinelle: mark the 'coccicheck' make target as .PHONY
"make DEVELOPER=1 DEVOPTS=pedantic" allows developers to compile
with -pedantic option, which may catch more problematic program
constructs and potential bugs.
* bb/make-developer-pedantic:
Makefile: add a DEVOPTS flag to get pedantic compilation
At this stage, `git range-diff` can determine corresponding commits
of two related commit ranges. This makes use of the recently introduced
implementation of the linear assignment algorithm.
The core of this patch is a straight port of the ideas of tbdiff, the
apparently dormant project at https://github.com/trast/tbdiff.
The output does not at all match `tbdiff`'s output yet, as this patch
really concentrates on getting the patch matching part right.
Note: due to differences in the diff algorithm (`tbdiff` uses the Python
module `difflib`, Git uses its xdiff fork), the cost matrix calculated
by `range-diff` is different (but very similar) to the one calculated
by `tbdiff`. Therefore, it is possible that they find different matching
commits in corner cases (e.g. when a patch was split into two patches of
roughly equal length).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command does not do a whole lot so far, apart from showing a usage
that is oddly similar to that of `git tbdiff`. And for a good reason:
the next commits will turn `range-branch` into a full-blown replacement
for `tbdiff`.
At this point, we ignore tbdiff's color options, as they will all be
implemented later using diff_options.
Since f318d73915 (generate-cmds.sh: export all commands to
command-list.h, 2018-05-10), every new command *requires* a man page to
build right away, so let's also add a blank man page, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem solved by the code introduced in this commit goes like this:
given two sets of items, and a cost matrix which says how much it
"costs" to assign any given item of the first set to any given item of
the second, assign all items (except when the sets have different size)
in the cheapest way.
We use the Jonker-Volgenant algorithm to solve the assignment problem to
answer questions such as: given two different versions of a topic branch
(or iterations of a patch series), what is the best pairing of
commits/patches between the different versions?
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This rewrites append_todo_help() from shell to C. It also incorporates
some parts of initiate_action() and complete_action() that also write
help texts to the todo file.
This also introduces the source file rebase-interactive.c. This file
will contain functions necessary for interactive rebase that are too
specific for the sequencer, and is part of libgit.a.
Two flags are added to rebase--helper.c: one to call
append_todo_help() (`--append-todo-help`), and another one to tell
append_todo_help() to write the help text suited for the edit-todo
mode (`--write-edit-todo`).
Finally, append_todo_help() is removed from git-rebase--interactive.sh
to use `rebase--helper --append-todo-help` instead.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 3ac68a93fd (help: add --config to list all available config -
2018-05-26) makes generate-cmdlist.sh adds a new input source
config.txt but it's not a Makefile dependency. Any changes in
config.txt will not trigger command-list.h regeneration and the config
list in this file becomes outdated. Correct the dependency.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functions present in `git-legacy-rebase.sh` are used by the rebase
backends as they are implemented as shell script functions in the
`git-rebase--<backend>` files.
To make the `builtin/rebase.c` work, we have to provide support via
a Unix shell script snippet that uses these functions and so, we
want to use the rebase backends *directly* from the builtin rebase
without going through `git-legacy-rebase.sh`.
This commit extracts the functions to a separate file,
`git-rebase--common`, that will be read by `git-legacy-rebase.sh` and
by the shell script snippets which will be used extensively in the
following commits.
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit imitates the strategy that was used to convert the
difftool to a builtin. We start by renaming the shell script
`git-rebase.sh` to `git-legacy-rebase.sh` and introduce a
`builtin/rebase.c` that simply executes the shell script version,
unless the config setting `rebase.useBuiltin` is set to `true`.
The motivation behind this is to rewrite all the functionality of the
shell script version in the aforementioned `rebase.c`, one by one and
be able to conveniently test new features by configuring
`rebase.useBuiltin`.
In the original difftool conversion, if sane_execvp() that attempts to
run the legacy scripted version returned with non-negative status, the
command silently exited without doing anything with success, but
sane_execvp() should not return with non-negative status in the first
place, so we use die() to notice such an abnormal case.
We intentionally avoid reading the config directly to avoid
messing up the GIT_* environment variables when we need to fall back to
exec()ing the shell script. The test of builtin rebase can be done by
`git -c rebase.useBuiltin=true rebase ...`
Signed-off-by: Pratik Karki <predatoramigo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a server-side knob to skip commits in exponential/fibbonacci
stride in an attempt to cover wider swath of history with a smaller
number of iterations, potentially accepting a larger packfile
transfer, instead of going back one commit a time during common
ancestor discovery during the "git fetch" transaction.
* jt/fetch-negotiator-skipping:
negotiator/skipping: skip commits during fetch
Code restructuring and a small fix to transport protocol v2 during
fetching.
* jt/fetch-pack-negotiator:
fetch-pack: introduce negotiator API
fetch-pack: move common check and marking together
fetch-pack: make negotiation-related vars local
fetch-pack: use ref adv. to prune "have" sent
fetch-pack: directly end negotiation if ACK ready
fetch-pack: clear marks before re-marking
fetch-pack: split up everything_local()
In the interest of code hygiene, make it easier to compile Git with the
flag -pedantic.
Pure pedantic compilation with GCC 7.3 results in one warning per use of
the translation macro `N_`:
warning: array initialized from parenthesized string constant [-Wpedantic]
Therefore also disable the parenthesising of i18n strings with
-DUSE_PARENS_AROUND_GETTEXT_N=0.
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When submitting a revised version of a patch series, it can be helpful
(to reviewers) to include a summary of changes since the previous
attempt in the form of an interdiff, however, doing so involves manually
copy/pasting the diff into the cover letter.
Add an --interdiff option to automate this process. The argument to
--interdiff specifies the tip of the previous attempt against which to
generate the interdiff. For example:
git format-patch --cover-letter --interdiff=v1 -3 v2
The previous attempt and the patch series being formatted must share a
common base.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sometimes I want to remove only Coccinelle's results, but keep all
other build artifacts left after my usual 'make all man' build. This
new 'cocciclean' make target will allow just that.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coccinelle outputs its suggested transformations as patches, whose
header looks something like this:
--- commit.c
+++ /tmp/cocci-output-19250-7ae78a-commit.c
Note the lack of 'diff --opts <old> <new>' line, the differing number
of path components on the --- and +++ lines, and the nonsensical
filename on the +++ line. 'patch -p0' can still apply these patches,
as it takes the filename to be modified from the --- line. Alas, 'git
apply' can't, because it takes the filename from the +++ line, and
then complains about the nonexisting file.
Pass the '--patch .' options to Coccinelle via the SPATCH_FLAGS 'make'
variable, as it seems to make it generate proper context diff patches,
with the header starting with a 'diff ...' line and containing sane
filenames. The resulting 'contrib/coccinelle/*.cocci.patch' files
then can be applied both with 'git apply' and 'patch' (even without
'-p0').
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1dc is an external library, that we carry in-tree for convenience
or grab as a submodule, so there is no use in applying our semantic
patches to its source files.
Therefore, exclude sha1dc's source files from Coccinelle's static
analysis.
This change also makes the static analysis somewhat faster: presumably
because of the heavy use of repetitive macro declarations, applying
the semantic patches 'array.cocci' and 'swap.cocci' to 'sha1dc/sha1.c'
takes over half a minute each on my machine, which amounts to about a
third of the runtime of applying these two semantic patches to the
whole git source tree.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The dependencies of the 'coccicheck' make target are listed with the
help of the $(patsubst) make function, which in this case doesn't do
any pattern substitution, but only adds the '.patch' suffix.
Use the shorter and more idiomatic $(addsuffix) make function instead.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'coccicheck' target doesn't create a file with the same name, so
mark it as .PHONY.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we prepare to change the behavior of the algorithms in
commit-reach.c, create a new test-tool subcommand 'reach' to test these
methods on interesting commit-graph shapes.
To use the new test-tool, use 'test-tool reach <method>' and provide
input to stdin that describes the inputs to the method. Currently, we
only implement the ref_newer method, which requires two commits. Use
lines "A:<committish>" and "B:<committish>" for the two inputs. We will
expand this input later to accommodate methods that take lists of
commits.
The test t6600-test-reach.sh creates a repo whose commits form a
two-dimensional grid. This grid makes it easy for us to determine
reachability because commit-A-B can reach commit-X-Y if and only if A is
at least X and B is at least Y. This helps create interesting test cases
for each result of the methods in commit-reach.c.
We test all methods in three different states of the commit-graph file:
Non-existent (no generation numbers), fully computed, and mixed (some
commits have generation numbers and others do not).
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are several commit walks in the codebase. Group them together into
a new commit-reach.c file and corresponding header. After we group these
walks into one place, we can reduce duplicate logic by calling
equivalent methods.
The method declarations in commit.h are not touched by this commit and
will be moved in a following commit. Many consumers need to point to
commit-reach.h and that would bloat this commit.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a new multi_pack_index struct for loading multi-pack-indexes into
memory. Create a test-tool builtin for reading basic information about
that multi-pack-index to verify the correct data is written.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In anticipation of writing multi-pack-indexes, add a skeleton
'git multi-pack-index write' subcommand and send the options to a
write_midx_file() method. Also create a skeleton test script that
tests the 'write' subcommand.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee
Jeff King
Junio C Hamano
Johannes Schindelin
René Scharfe
Han-Wen Nienhuys
Eric Sunshine
Philippe Blain
Jiang Xin
Jonathan Tan
Luc Van Oostenryck
Carlo Marcelo Arenas Belón
Emily Shaffer
Denton Liu
Garima Singh
Martin Ågren
Thomas Gummerer
Heba Waly
Bert Wesarg
Alexandr Miloslavskiy
ryenus
SZEDER Gábor
Daniel Ferreira
Christian Couder
Jeff Hostetler
Ævar Arnfjörð Bjarmason
Nguyễn Thái Ngọc Duy
Clément Chigot
Phillip Wood
Paul-Sebastian Ungureanu
Joel Teichroeb
Ramsay Jones
brian m. carlson
Josh Steadmon
Elijah Newren
Đoàn Trần Công Danh
James Knight
Antonio Ospite
Alban Gruin
Ben Peart
Pratik Karki
Beat Bolli
Derrick Stolee