Contribution-focused fork of github:VoronDesign/Voron-2

Go to file

volcom8190 1801c5a638 add dxfs for stock configurations: back panel, deck panel and bottom panel add dxfs for stock configurations: back panel, deck panel and bottom panel 300 and 350 bottom panel untested, all the rest should be good		2019-07-16 16:08:06 -04:00
DXFs	add dxfs for stock configurations: back panel, deck panel and bottom panel	2019-07-16 16:08:06 -04:00
Firmware	Create VORON2_stock_300_printer.cfg	2019-07-12 14:45:05 -04:00
Mods	Update README.md	2019-07-07 15:36:37 -04:00
PCB/XY Endstop	Adding X/Y Hall board back in	2019-05-16 18:17:29 -05:00
Slicer_Profiles	update slicer profiles	2019-07-13 18:25:05 -04:00
STLs	add lightbar mounts, create misc folder	2019-06-03 14:13:53 -04:00
.gitignore	Adding BeltChain for V2	2017-12-07 14:17:40 -08:00
LICENSE.md	Rename License.md to LICENSE.md	2019-07-07 20:40:20 -04:00
README.md	Update README.md	2019-07-06 07:07:39 -04:00

README.md

Voron 2.1.2

The third official release of the Voron 2.1.2 3d printer. You can find the BOM in the configurator located at the Voron Design website. The recommended sizes for this printer are 250mm^3, 300mm^3, and 350mm^3. Anything outside those is not supported!