738d83cce1
* Direct drive mod for 2.1 and 2.2. * Add example image to direct drive mod readme.md * Add assembly instructions to direct drive mod readme.md * Fix m2.5-m2 assembly instructions bug in direct drive mod readme.md * Add v6 direct drive mount. E3d v6 is reported to be 1.1mm taller than the mosquito all mounted up. This change should retain the nozzle elevation to help keep inductive probes working if someone mounts a v6 to the BMG mount plate. * direct drive model improvements * make room for extra belt * add 0.32mm seats for back side nuts * Fix support arm model bug in v6 * drop the fan nozzle outlet as low as I dare * add known issue * Add 2.2 openbuilds chain mod * added example render image to 2.2 openbuilds drag chain mod * add taller x carriage mount for drag chain mod * update openbuilds xy bridge * pull back cable chain mount 3mm +x * modify tube profile * add 1mm mouth height * add 1mm span width to curves
7.9 KiB
7.9 KiB
Mods
A neatly structured list of all the content in each folder
Remember to update this README when uploading new mods!
List structure
The list should be structured in the following way:
"Creator of mods"
"Mods name"
- "Small desciption of the mod"
"Mod 2's name"
- "Small desciption of the mod"
3D_Black
- Different fan covers for 40mm fans.
Andreq
- Tool used for grinding flats on a shaft at specific places.
Armstr0ng
- A mount for aluminium LED extrusions with hidden fasteners
ArmyAg08
- Different C270 camera mounts, attached to the extrusions.
- Corner panel clip that fit 3mm or 1/8" panels with foam tape.
Chron
- Configuration for SKR 1.3 TMC2208 UART
Danowar
- Mounts two Mobius Extruders to the back of the printer.
- Mounts for FYSETCS F6 controller boards.
- Klipper config for a FYSETC F6 350 build.
- Mount for Humidity/Temperature sensor.
- Spool holder with built in weight scale.
TL 2-to-1 Mosquito Toolhead Adapter
- Mounts the Triangle Labs 2-to-1 adapter directly to the mosquito toolhead.
- Detachable mount for tablet using magnets.
Dunar
- External panel holder
FHeilmann
- Parts modified for extrusions with 5mm gap.
- Parts modified for extrusions with 5mm gap.
Fulg
- Mount for the PanelDue5 LCD display.
GSL12
Glowtape
GustavTheMighty
- Case/mount for the 4.3 PanelDue LCD Display.
Hackdoggo
- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears.
Jass_on
- Panel clips and handles for using tempered glass side panels.
- SKR 1.3 mount with built in 40mm fan mount.
JeJeff
- Slot covers for extrusions with 5mm slot width.
- Cable tie mounts for 4mm cable ties.
- Main Plug Panel modified to hold a RJ45 ethernet socket.
Jink
- Mount / Bracket supporting the coroplast sheets.
- Mirrored RAMPS bracket.
- Mount for 3x WAGO connectors.
JustinVoelker
- Mains plug panel with ethernet cutout.
K1JWG
- Custom Voron 2 logo for use as a PanelDue 7i startup splash screen.
Koios
- Front panel locks for 6mm tempered glass panels.
- Mount for C920 secured to the top front extrusion.
- Different mounts for LED light bars.
Railgunner
- Dual direct drive using 2x Bondtech BMG.
Seamen
- Mount for RAMPS board with the stepper extender.
Sparreau
- Bracket for mounting the FSR PCB.
- Mount for attaching a dial indicator to the X Carriage.
- Scalable mains plug panel with small modifications.
- An extra tab added to the Z idler to prevent sagging / rotation.
Stephan
- Drop in replacement of the stock probe to a M12.
- Drop in replacement of the stock probe to a BLTouch.
daveidmx
- 30mm fan adapter for the X carriage.
etherwalker
exquyre
- Case for Anet 12864 LCD display.
- Mount for 12V LED bars to the top extrusions.
- Room for 3-4 20AWG wires.
- Mounting bracket for 1 Einsy and 1 RAMPS.
hiemmer
- Tool holder for calipers, screwdriver etc.
nemgrea
- Hinges, handles and magnet mounts for creating a split front door panel.
pnokel
- Small mount to secure wires with zip ties.
- Different coroplast holders for added support.
- 14.5mm toothed idler.
steve450
- Corner brackets preventing rotation of the extrusions, and stiffening the joints.
Also covers the Z-belt hole for improved aesthetics.
synfinatic
- Duet/Duex fan mount with air vents directly above the steppers to increase airflow.
- Mount for emergency button attached to the top of the printer.
- Mount for filament drybox attached to the side of the printer.
- Mount for LED lightbars.
- Extra bracket to keep the power supply in place.
- Mount for an ethernet coupler to extend / move the ethernet plug somewhere more convenient.
warriorofwire
Openbuilds Drag Chain
- Off-the-shelf, cheap, snap opening drag chain for gantry wiring and protecting wires down to the deck.
- Bondtech BMG-m and Mosquito direct drive combo. Partial support for e3d v6.
wile.e.coyote
- Support for the coroplast to prevent sagging.
- Mounting bracket for 2 buck converters.
- Mount for brass brush. Used for cleaning nozzle before printing.
- Different mounts for Wago connectors.