kreyren/Vorrenrey
1
0
Fork 0
Code Issues 1 Pull Requests Releases Activity

Uploaded revised config files

Browse Source 
Uploaded new 300mm stock config and revised 350.   250/300/350 configs now harmonized for consistency with latest Klipper changes.
This commit is contained in:
mmmboost 2019-07-09 08:22:21 -06:00 committed by GitHub
parent fa1f073abe
commit a295f8329c
Signed by: GitHub
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 1054 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

527
Firmware/Klipper/Voron_2.1/Klipper/Configurations/Stock 300 Config.cfg Normal file
View File

@ -0,0 +1,527 @@
# VORON2 300mm config
# This is a base printer.cfg file for the VORON2 printer and matches the manual/build guide exactly
# for controllers used (dual RAMPS) and pin layout for all connected components.
# Created by "Boff" with help from the VORON community.
# Revised 7/09/2019 by "wile.e.coyote" to include updates and additions to Klipper component configurations
# as well as to harmonize "stock" configurations for 250/300/350 builds.
# For other build sizes, controllers, or non-standard pin connections, please see
# https://github.com/mzbotreprap/VORON/tree/master/Firmware/Klipper/Voron_2.1/Klipper/Configurations
# for other example Klipper configs created by the VORON community.
# This file is only an example - be sure to review and update it
# according to the specifics of your printer. See the example.cfg and
# example-extras.cfg files for a description of available Klipper parameters.
# AND PLEASE READ THROUGH THE KLIPPER DOCUMENTATION FIRST!
# https://github.com/KevinOConnor/klipper/tree/master/docs
# *** THINGS TO CHANGE/CHECK: ***
# Arduino paths [mcu] section
# Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
# FSR switch (z endstop) location [homing_override] section
# FSR switch (z endstop) offset for Z0 [stepper_z] section
# Probe points [quad_gantry_level] section
# Min & Max gantry corner positions [quad_gantry_level] section
# PID tune [extruder] and [heater_bed] sections
# Fine tune E steps [extruder] section
[mcu]
# Mcu for X/Y/E steppers
serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE**
# Obtain definition by "ls -l /dev/serial/by-id/"
# Some Arduinos clones (CH340) may require using "ls -l /dev/serial/by-path/"
pin_map: arduino
restart_method: arduino
[mcu z]
# Mcu for Z steppers
serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE**
# Obtain definition by "ls -l /dev/serial/by-id/"
# Some Arduinos clones (CH340) may require using "ls -l /dev/serial/by-path/"
pin_map: arduino
restart_method: arduino
[printer]
kinematics: corexy
# Velocities and accels may be increased for better performance
# but should be tested and increased incrementally
max_velocity: 250
max_accel: 2500
max_z_velocity: 35
max_z_accel: 800
square_corner_velocity: 8.0
# The maximum velocity (in mm/s) that the toolhead may travel a 90
# degree corner at. The default is 5mm/s.
# For more information, refer to Klipper docs.
[idle_timeout]
gcode:
TURN_OFF_HEATERS
M84 ; disable steppers
# 30 min
timeout: 1800
[stepper_x]
# B Stepper
step_pin: ar54
dir_pin: !ar55
enable_pin: !ar38
# X on mcu_xye
step_distance: 0.0125
# 80 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^ar2
# X_MAX on mcu_xye
position_min: 0
position_endstop: 303
position_max: 303
homing_speed: 100
second_homing_speed: 25
homing_retract_dist: 5
homing_positive_dir: true
[stepper_y]
# A Stepper
step_pin: ar60
dir_pin: !ar61
enable_pin: !ar56
# Y on mcu_xye
step_distance: 0.0125
# 80 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^ar15
# Y_MAX on mcu_xye
position_min: 0
position_endstop: 303
position_max: 303
homing_speed: 100
second_homing_speed: 25
homing_retract_dist: 5
homing_positive_dir: true
[stepper_z]
# Z0 Stepper - Front Left
step_pin: z:ar54
dir_pin: !z:ar55
enable_pin: !z:ar38
# X on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^!z:ar18
# Z_MIN on mcu_z
position_endstop: 0
# Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
# (+) value = endstop above Z0, (-) value = endstop below
position_max: 290
position_min: -5
# Set to -5 to allow room for squaring gantry with quad_gantry_level
homing_speed: 15.0
second_homing_speed: 1.5
homing_retract_dist: 3.0
homing_positive_dir: false
[stepper_z1]
# Z1 Stepper - Rear Left
step_pin: z:ar60
dir_pin: z:ar61
enable_pin: !z:ar56
# Y on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
[stepper_z2]
# Z2 Stepper - Rear Right
step_pin: z:ar46
dir_pin: !z:ar48
enable_pin: !z:ar62
# Z on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
[stepper_z3]
# Z3 Stepper - Front Right
step_pin: z:ar26
dir_pin: z:ar28
enable_pin: !z:ar24
# E0 on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
[extruder]
step_pin: ar26
dir_pin: ar28
enable_pin: !ar24
# E0 on mcu_xye
step_distance: 0.00180180
# 555 steps per mm - 1.8 deg - 1/16 microstepping (Mobius3)
# This must be calibrated to your specific machine for best results
nozzle_diameter: 0.400
filament_diameter: 1.750
max_extrude_only_distance: 800
# This is set high to allow the load/unload filament macros to run
# Adjust to match your approximate filament path length
#max_extrude_cross_section:
# Maximum area (in mm^2) of an extrusion cross section (eg,
# extrusion width multiplied by layer height). This setting prevents
# excessive amounts of extrusion during relatively small XY moves.
# If a move requests an extrusion rate that would exceed this value
# it will cause an error to be returned. The default is: 4.0 *
# nozzle_diameter^2
#max_extrude_only_velocity:
#max_extrude_only_accel:
# Maximum velocity (in mm/s) and acceleration (in mm/s^2) of the
# extruder motor for retractions and extrude-only moves. These
# settings do not place any limit on normal printing moves. If not
# specified then they are calculated to match the limit an XY
# printing move with a cross section of 4.0*nozzle_diameter^2 would
# have.
heater_pin: ar10
# D10 on mcu_xye
max_power: 1.0
sensor_type: ATC Semitec 104GT-2
sensor_pin: analog13
# T0 on mcu_xye
smooth_time: 3.0
control: pid
pid_Kp: 16.430
pid_Ki: 0.755
pid_Kd: 89.337
min_extrude_temp: 170
min_temp: 0
max_temp: 270
pressure_advance: 0
# The amount of raw filament to push into the extruder during
# extruder acceleration. An equal amount of filament is retracted
# during deceleration. It is measured in millimeters per
# millimeter/second. The default is 0, which disables pressure
# advance.
pressure_advance_lookahead_time: 0.010
# A time (in seconds) to "look ahead" at future extrusion moves when
# calculating pressure advance. This is used to reduce the
# application of pressure advance during cornering moves that would
# otherwise cause retraction followed immediately by pressure
# buildup. This setting only applies if pressure_advance is
# non-zero. The default is 0.010 (10 milliseconds).
[probe]
# Inductive Probe
# Z height probe. One may define this section to enable Z height
# probing hardware. When this section is enabled, PROBE and
# QUERY_PROBE extended g-code commands become available. The probe
# section also creates a virtual "probe:z_virtual_endstop" pin. One
# may set the stepper_z endstop_pin to this virtual pin on cartesian
# style printers that use the probe in place of a z endstop.
pin: ^!z:ar19
# Z_MAX on mcu_z
x_offset: 0.0
y_offset: 25.0
# Offset (in mm) for inductive probe Y direction from nozzle
z_offset: 0.0
# Offset (in mm) for inductive probe in Z height
speed: 2.0
# Speed (in mm/s) of the Z axis when probing. The default is 5mm/s.
samples: 4
# Number of times to probe a point
sample_retract_dist: 3.0
# How far to retract (in mm) from the probe point for multi-probe samples
samples_result: average
# The calculation method when sampling more than once - either
# "median" or "average". The default is average.
#samples_tolerance: 0.100
# The maximum Z distance (in mm) that a sample may differ from other
# samples. If this tolerance is exceeded then either an error is
# reported or the attempt is restarted (see
# samples_tolerance_retries). The default is 0.100mm.
#samples_tolerance_retries: 0
# The number of times to retry if a sample is found that exceeds
# samples_tolerance. On a retry, all current samples are discarded
# and the probe attempt is restarted. If a valid set of samples are
# not obtained in the given number of retries then an error is
# reported. The default is zero which causes an error to be reported
# on the first sample that exceeds samples_tolerance.
[fan]
# Print cooling fan
pin: ar9
# D9 on mcu_xye
max_power: 1.0
# The maximum power (expressed as a value from 0.0 to 1.0) that the
# pin may be set to. The value 1.0 allows the pin to be set fully
# enabled for extended periods, while a value of 0.5 would allow the
# pin to be enabled for no more than half the time. This setting may
# be used to limit the total power output (over extended periods) to
# the fan. If this value is less than 1.0 then fan speed requests
# will be scaled between zero and max_power (for example, if
# max_power is .9 and a fan speed of 80% is requested then the fan
# power will be set to 72%). The default is 1.0.
shutdown_speed: 0
# The desired fan speed (expressed as a value from 0.0 to 1.0) if
# the micro-controller software enters an error state. The default
# is 0.
cycle_time: 0.010
# The amount of time (in seconds) for each PWM power cycle to the
# fan. It is recommended this be 10 milliseconds or greater when
# using software based PWM. The default is 0.010 seconds.
hardware_pwm: false
# Enable this to use hardware PWM instead of software PWM. The
# default is False.
kick_start_time: 0.500
# Time (in seconds) to run the fan at full speed when first enabling
# it (helps get the fan spinning). The default is 0.100 seconds.
# See the "fan" section in example.cfg for a description of the
# above parameters.
[heater_fan hotend_fan]
# Hotend fan
# See the "heater_fan" section in example-extras.cfg for a complete
# description of this sections parameters.
pin: z:ar9
# D9 on mcu_z
max_power: 1.0
shutdown_speed: 1.0
cycle_time: 0.010
hardware_pwm: false
kick_start_time: 0.500
heater: extruder
heater_temp: 75.0
# A temperature (in Celsius) that the heater must drop below before
# the fan is disabled. The default is 50 Celsius.
fan_speed: 1.0
# The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# will be set to when its associated heater is enabled. The default
# is 1.0
[controller_fan controller_fan]
# Controller fan
# See the "controller_fan" section in example-extras.cfg for a complete
# description of this sections parameters.
pin: z:ar10
# D10 on mcu_z
max_power: 1.0
shutdown_speed: 0
cycle_time: 0.010
hardware_pwm: false
kick_start_time: 0.500
idle_timeout: 30
# The ammount of time (in seconds) after a stepper driver or heater
# was active and the fan should be kept running. The default
# is 30 seconds.
idle_speed: 0.4
# The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# will be set to when a heater or stepper driver was active and before
# the idle_timeout is reached. This must be greater or equal
# max_power. The default is max_power
heater: extruder,heater_bed
# Name of the config section defining the heater that this fan is
# associated with. If a comma separated list of heater names is
# provided here, then the fan will be enabled when any of the given
# heaters are enabled. The default is "extruder".
# [temperature_fan chamber]
# # Chamber temp and Exhaust fan
# # See the "temperature_fan" section in example-extras.cfg for a complete
# # description of this sections parameters.
# pin: z:ar8
# # D8 on mcu_z
# max_power: 1.0
# shutdown_speed: 0
# cycle_time: 0.010
# hardware_pwm: false
# kick_start_time: 0.500
# sensor_type: ATC Semitec 104GT-2
# sensor_pin: analog15
# min_temp: 0
# max_temp: 100
# # The maximum range of valid temperatures (in Celsius) that the
# # sensor must remain within. This controls a safety feature
# # implemented in the micro-controller code - should the measured
# # temperature ever fall outside this range then the micro-controller
# # will go into a shutdown state. Set this range just wide enough so
# # that reasonable temperatures do not result in an error. These
# # parameters must be provided.
# target_temp: 50
# # A temperature (in Celsius) that will be the target temperature.
# # The default is 40 degrees.
# max_speed: 1.0
# # The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# # will be set to when the sensor temperature exceeds the set value.
# # The default is 1.0.
# min_speed: 0.1
# # The minimum fan speed (expressed as a value from 0.0 to 1.0) that
# # the fan will be set to for PID temperature fans.
# # The default is 0.3.
# control: pid
# pid_Kp: 40
# pid_Ki: 0.2
# pid_Kd: 0.1
# pid_deriv_time: 2.0
# #pid_integral_max:
# # The maximum "windup" the integral term may accumulate. The default
# # is to use the same value as max_power.
# gcode_id: C
# # If set, the temperature will be reported in M105 queries using the
# # given id. The default is to not report the temperature via M105.
[heater_bed]
heater_pin: z:ar11
# D11 (servo) on mcu_z
sensor_type: NTC 100K MGB18-104F39050L32
# NTC 100K MGB18-104F39050L32 is for Keenovo thermistors
sensor_pin: z:analog15
# T2 on mcu_z
smooth_time: 3.0
max_power: 0.75
control: pid
pid_Kp=47.690
pid_Ki=1.556
pid_Kd=365.338
min_temp: 0
max_temp: 110
[verify_heater heater_bed]
max_error: 120
# The maximum "cumulative temperature error" before raising an
# error. Smaller values result in stricter checking and larger
# values allow for more time before an error is reported.
# Specifically, the temperature is inspected once a second and if it
# is close to the target temperature then an internal "error
# counter" is reset; otherwise, if the temperature is below the
# target range then the counter is increased by the amount the
# reported temperature differs from that range. Should the counter
# exceed this "max_error" then an error is raised. The default is
# 120.
check_gain_time: 60
# This controls heater verification during initial heating. Smaller
# values result in stricter checking and larger values allow for
# more time before an error is reported. Specifically, during
# initial heating, as long as the heater increases in temperature
# within this time frame (specified in seconds) then the internal
# "error counter" is reset. The default is 20 seconds for extruders
# and 60 seconds for heater_bed.
hysteresis: 5
# The maximum temperature difference (in Celsius) to a target
# temperature that is considered in range of the target. This
# controls the max_error range check. It is rare to customize this
# value. The default is 5.
heating_gain: 2
# The minimum temperature (in Celsius) that the heater must increase
# by during the check_gain_time check. It is rare to customize this
# value. The default is 2.
[verify_heater extruder]
max_error: 120
check_gain_time: 20
hysteresis: 5
heating_gain: 2
[homing_override]
axes: z
set_position_z: 0
gcode:
G90
G0 Z5 F600
G90
G28 X Y
G0 X247 Y300 F3600
# XY Location of the FSR Switch. Update to your machines XY location.
G28 Z0
G0 Z10 F1800
G0 X150 Y150 Z20 F3600
[quad_gantry_level]
# Use QUAD_GANTRY_LEVEL to level a gantry.
gantry_corners:
-58,-7
358,368
# Min & Max gantry corners - measure from nozzle at MIN (0,0) and MAX (300,300) to respective belt positions
points:
75,75
75,215
225,215
225,75
# Probe points
speed: 200
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.
horizontal_move_z: 5
# The height (in mm) that the head should be commanded to move to
# just prior to starting a probe operation. The default is 5
retries: 5
# number of times to retry if the stepper movements aren't within tolerance
retry_tolerance: 0.0075
# if retries are enabled then retry if any z_stepper movement was greater
# than the retry_tolerance
[display]
# RepRapDiscount 128x64 Full Graphic Smart Controller
lcd_type: st7920
cs_pin: z:ar16
sclk_pin: z:ar23
sid_pin: z:ar17
# LCD connector on mcu_z
menu_timeout: 40
# Timeout for menu. Being inactive this amount of seconds will exit the menu
# Default is 0 seconds (disabled)
encoder_pins: ^z:ar33, ^z:ar31
click_pin: ^!z:ar35
kill_pin: ^!z:ar41
### Macros ###
[gcode_macro G32]
gcode:
G28
QUAD_GANTRY_LEVEL
G28 Z0
G0 X150 Y150 Z20 F6000
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - please customize for your slicer of choice
gcode:
M117 Homing... ; display message
G28 ; home all axes
G1 Z20 F3000 ; move nozzle away from bed
M117 Preheat (Print) ; display message
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customize for your slicer of choice
gcode:
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600 ; retract filament
G91 ; relative positioning
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
TURN_OFF_HEATERS
M107 ; turn off fan
G1 Z5 F3000 ; move nozzle up 5mm
G90 ; absolute positioning
G0 X125 Y250 F3600 ; park nozzle at rear
M117 Finished! ; display message
[gcode_macro UNLOAD_FILAMENT]
# Extrusion lengths must be adjusted for your particular configuration before use
gcode:
M83 ; set extruder to relative
G1 E10 F300 ; extrude a little to soften tip
G1 E-780 F1800 ; retract filament completely
M82 ; set extruder to absolute
[gcode_macro LOAD_FILAMENT]
# Extrusion lengths must be adjusted for your particular configuration before use
gcode:
M83 ; set extruder to relative
G1 E750 F1800 ; quickly load filament to down bowden
G1 E30 F300 ; slower extrusion for hotend path
G1 E15 F150 ; prime nozzle with filament
M82 ; set extruder to absolute
# Sensor Types
# "EPCOS 100K B57560G104F"
# "ATC Semitec 104GT-2"
# "NTC 100K beta 3950"
# "Honeywell 100K 135-104LAG-J01"
# "NTC 100K MGB18-104F39050L32" (Keenovo Heater Pad)
# "AD595"
# "PT100 INA826"

527
Firmware/Klipper/Voron_2.1/Klipper/Configurations/Stock 350 Config.cfg Normal file
View File

@ -0,0 +1,527 @@
# VORON2 350mm config
# This is a base printer.cfg file for the VORON2 printer and matches the manual/build guide exactly
# for controllers used (dual RAMPS) and pin layout for all connected components.
# Created by "Boff" with help from the VORON community.
# Revised 6/26/2019 by "wile.e.coyote" to include updates and additions to Klipper component configurations
# as well as to harmonize "stock" configurations for 250/300/350 builds.
# For other build sizes, controllers, or non-standard pin connections, please see
# https://github.com/mzbotreprap/VORON/tree/master/Firmware/Klipper/Voron_2.1/Klipper/Configurations
# for other example Klipper configs created by the VORON community.
# This file is only an example - be sure to review and update it
# according to the specifics of your printer. See the example.cfg and
# example-extras.cfg files for a description of available Klipper parameters.
# AND PLEASE READ THROUGH THE KLIPPER DOCUMENTATION FIRST!
# https://github.com/KevinOConnor/klipper/tree/master/docs
# *** THINGS TO CHANGE/CHECK: ***
# Arduino paths [mcu] section
# Thermistor types [extruder] and [heater_bed] sections - See 'sensor types' list at end of file
# FSR switch (z endstop) location [homing_override] section
# FSR switch (z endstop) offset for Z0 [stepper_z] section
# Probe points [quad_gantry_level] section
# Min & Max gantry corner positions [quad_gantry_level] section
# PID tune [extruder] and [heater_bed] sections
# Fine tune E steps [extruder] section
[mcu]
# Mcu for X/Y/E steppers
serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE**
# Obtain definition by "ls -l /dev/serial/by-id/"
# Some Arduinos clones (CH340) may require using "ls -l /dev/serial/by-path/"
pin_map: arduino
restart_method: arduino
[mcu z]
# Mcu for Z steppers
serial: /dev/serial/by-id/**INSERT_YOUR_ARDUINO_DEFINITION_HERE**
# Obtain definition by "ls -l /dev/serial/by-id/"
# Some Arduinos clones (CH340) may require using "ls -l /dev/serial/by-path/"
pin_map: arduino
restart_method: arduino
[printer]
kinematics: corexy
# Velocities and accels may be increased for better performance
# but should be tested and increased incrementally
max_velocity: 250
max_accel: 2500
max_z_velocity: 35
max_z_accel: 800
square_corner_velocity: 8.0
# The maximum velocity (in mm/s) that the toolhead may travel a 90
# degree corner at. The default is 5mm/s.
# For more information, refer to Klipper docs.
[idle_timeout]
gcode:
TURN_OFF_HEATERS
M84 ; disable steppers
# 30 min
timeout: 1800
[stepper_x]
# B Stepper
step_pin: ar54
dir_pin: !ar55
enable_pin: !ar38
# X on mcu_xye
step_distance: 0.0125
# 80 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^ar2
# X_MAX on mcu_xye
position_min: 0
position_endstop: 353
position_max: 353
homing_speed: 100
second_homing_speed: 25
homing_retract_dist: 5
homing_positive_dir: true
[stepper_y]
# A Stepper
step_pin: ar60
dir_pin: !ar61
enable_pin: !ar56
# Y on mcu_xye
step_distance: 0.0125
# 80 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^ar15
# Y_MAX on mcu_xye
position_min: 0
position_endstop: 353
position_max: 353
homing_speed: 100
second_homing_speed: 25
homing_retract_dist: 5
homing_positive_dir: true
[stepper_z]
# Z0 Stepper - Front Left
step_pin: z:ar54
dir_pin: !z:ar55
enable_pin: !z:ar38
# X on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
endstop_pin: ^!z:ar18
# Z_MIN on mcu_z
position_endstop: 0
# Z-position of nozzle (in mm) to z-endstop trigger point relative to print surface (Z0)
# (+) value = endstop above Z0, (-) value = endstop below
position_max: 340
position_min: -5
# Set to -5 to allow room for squaring gantry with quad_gantry_level
homing_speed: 15.0
second_homing_speed: 1.5
homing_retract_dist: 3.0
homing_positive_dir: false
[stepper_z1]
# Z1 Stepper - Rear Left
step_pin: z:ar60
dir_pin: z:ar61
enable_pin: !z:ar56
# Y on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
[stepper_z2]
# Z2 Stepper - Rear Right
step_pin: z:ar46
dir_pin: !z:ar48
enable_pin: !z:ar62
# Z on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
[stepper_z3]
# Z3 Stepper - Front Right
step_pin: z:ar26
dir_pin: z:ar28
enable_pin: !z:ar24
# E0 on mcu_z
step_distance: 0.00250
# 400 steps per mm - 1.8 deg - 1/16 microstepping
[extruder]
step_pin: ar26
dir_pin: ar28
enable_pin: !ar24
# E0 on mcu_xye
step_distance: 0.00180180
# 555 steps per mm - 1.8 deg - 1/16 microstepping (Mobius3)
# This must be calibrated to your specific machine for best results
nozzle_diameter: 0.400
filament_diameter: 1.750
max_extrude_only_distance: 820
# This is set high to allow the load/unload filament macros to run
# Adjust to match your approximate filament path length
#max_extrude_cross_section:
# Maximum area (in mm^2) of an extrusion cross section (eg,
# extrusion width multiplied by layer height). This setting prevents
# excessive amounts of extrusion during relatively small XY moves.
# If a move requests an extrusion rate that would exceed this value
# it will cause an error to be returned. The default is: 4.0 *
# nozzle_diameter^2
#max_extrude_only_velocity:
#max_extrude_only_accel:
# Maximum velocity (in mm/s) and acceleration (in mm/s^2) of the
# extruder motor for retractions and extrude-only moves. These
# settings do not place any limit on normal printing moves. If not
# specified then they are calculated to match the limit an XY
# printing move with a cross section of 4.0*nozzle_diameter^2 would
# have.
heater_pin: ar10
# D10 on mcu_xye
max_power: 1.0
sensor_type: ATC Semitec 104GT-2
sensor_pin: analog13
# T0 on mcu_xye
smooth_time: 3.0
control: pid
pid_Kp: 16.430
pid_Ki: 0.755
pid_Kd: 89.337
min_extrude_temp: 170
min_temp: 0
max_temp: 270
pressure_advance: 0
# The amount of raw filament to push into the extruder during
# extruder acceleration. An equal amount of filament is retracted
# during deceleration. It is measured in millimeters per
# millimeter/second. The default is 0, which disables pressure
# advance.
pressure_advance_lookahead_time: 0.010
# A time (in seconds) to "look ahead" at future extrusion moves when
# calculating pressure advance. This is used to reduce the
# application of pressure advance during cornering moves that would
# otherwise cause retraction followed immediately by pressure
# buildup. This setting only applies if pressure_advance is
# non-zero. The default is 0.010 (10 milliseconds).
[probe]
# Inductive Probe
# Z height probe. One may define this section to enable Z height
# probing hardware. When this section is enabled, PROBE and
# QUERY_PROBE extended g-code commands become available. The probe
# section also creates a virtual "probe:z_virtual_endstop" pin. One
# may set the stepper_z endstop_pin to this virtual pin on cartesian
# style printers that use the probe in place of a z endstop.
pin: ^!z:ar19
# Z_MAX on mcu_z
x_offset: 0.0
y_offset: 25.0
# Offset (in mm) for inductive probe Y direction from nozzle
z_offset: 0.0
# Offset (in mm) for inductive probe in Z height
speed: 2.0
# Speed (in mm/s) of the Z axis when probing. The default is 5mm/s.
samples: 4
# Number of times to probe a point
sample_retract_dist: 3.0
# How far to retract (in mm) from the probe point for multi-probe samples
samples_result: average
# The calculation method when sampling more than once - either
# "median" or "average". The default is average.
#samples_tolerance: 0.100
# The maximum Z distance (in mm) that a sample may differ from other
# samples. If this tolerance is exceeded then either an error is
# reported or the attempt is restarted (see
# samples_tolerance_retries). The default is 0.100mm.
#samples_tolerance_retries: 0
# The number of times to retry if a sample is found that exceeds
# samples_tolerance. On a retry, all current samples are discarded
# and the probe attempt is restarted. If a valid set of samples are
# not obtained in the given number of retries then an error is
# reported. The default is zero which causes an error to be reported
# on the first sample that exceeds samples_tolerance.
[fan]
# Print cooling fan
pin: ar9
# D9 on mcu_xye
max_power: 1.0
# The maximum power (expressed as a value from 0.0 to 1.0) that the
# pin may be set to. The value 1.0 allows the pin to be set fully
# enabled for extended periods, while a value of 0.5 would allow the
# pin to be enabled for no more than half the time. This setting may
# be used to limit the total power output (over extended periods) to
# the fan. If this value is less than 1.0 then fan speed requests
# will be scaled between zero and max_power (for example, if
# max_power is .9 and a fan speed of 80% is requested then the fan
# power will be set to 72%). The default is 1.0.
shutdown_speed: 0
# The desired fan speed (expressed as a value from 0.0 to 1.0) if
# the micro-controller software enters an error state. The default
# is 0.
cycle_time: 0.010
# The amount of time (in seconds) for each PWM power cycle to the
# fan. It is recommended this be 10 milliseconds or greater when
# using software based PWM. The default is 0.010 seconds.
hardware_pwm: false
# Enable this to use hardware PWM instead of software PWM. The
# default is False.
kick_start_time: 0.500
# Time (in seconds) to run the fan at full speed when first enabling
# it (helps get the fan spinning). The default is 0.100 seconds.
# See the "fan" section in example.cfg for a description of the
# above parameters.
[heater_fan hotend_fan]
# Hotend fan
# See the "heater_fan" section in example-extras.cfg for a complete
# description of this sections parameters.
pin: z:ar9
# D9 on mcu_z
max_power: 1.0
shutdown_speed: 1.0
cycle_time: 0.010
hardware_pwm: false
kick_start_time: 0.500
heater: extruder
heater_temp: 75.0
# A temperature (in Celsius) that the heater must drop below before
# the fan is disabled. The default is 50 Celsius.
fan_speed: 1.0
# The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# will be set to when its associated heater is enabled. The default
# is 1.0
[controller_fan controller_fan]
# Controller fan
# See the "controller_fan" section in example-extras.cfg for a complete
# description of this sections parameters.
pin: z:ar10
# D10 on mcu_z
max_power: 1.0
shutdown_speed: 0
cycle_time: 0.010
hardware_pwm: false
kick_start_time: 0.500
idle_timeout: 30
# The ammount of time (in seconds) after a stepper driver or heater
# was active and the fan should be kept running. The default
# is 30 seconds.
idle_speed: 0.4
# The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# will be set to when a heater or stepper driver was active and before
# the idle_timeout is reached. This must be greater or equal
# max_power. The default is max_power
heater: extruder,heater_bed
# Name of the config section defining the heater that this fan is
# associated with. If a comma separated list of heater names is
# provided here, then the fan will be enabled when any of the given
# heaters are enabled. The default is "extruder".
# [temperature_fan chamber]
# # Chamber temp and Exhaust fan
# # See the "temperature_fan" section in example-extras.cfg for a complete
# # description of this sections parameters.
# pin: z:ar8
# # D8 on mcu_z
# max_power: 1.0
# shutdown_speed: 0
# cycle_time: 0.010
# hardware_pwm: false
# kick_start_time: 0.500
# sensor_type: ATC Semitec 104GT-2
# sensor_pin: analog15
# min_temp: 0
# max_temp: 100
# # The maximum range of valid temperatures (in Celsius) that the
# # sensor must remain within. This controls a safety feature
# # implemented in the micro-controller code - should the measured
# # temperature ever fall outside this range then the micro-controller
# # will go into a shutdown state. Set this range just wide enough so
# # that reasonable temperatures do not result in an error. These
# # parameters must be provided.
# target_temp: 50
# # A temperature (in Celsius) that will be the target temperature.
# # The default is 40 degrees.
# max_speed: 1.0
# # The fan speed (expressed as a value from 0.0 to 1.0) that the fan
# # will be set to when the sensor temperature exceeds the set value.
# # The default is 1.0.
# min_speed: 0.1
# # The minimum fan speed (expressed as a value from 0.0 to 1.0) that
# # the fan will be set to for PID temperature fans.
# # The default is 0.3.
# control: pid
# pid_Kp: 40
# pid_Ki: 0.2
# pid_Kd: 0.1
# pid_deriv_time: 2.0
# #pid_integral_max:
# # The maximum "windup" the integral term may accumulate. The default
# # is to use the same value as max_power.
# gcode_id: C
# # If set, the temperature will be reported in M105 queries using the
# # given id. The default is to not report the temperature via M105.
[heater_bed]
heater_pin: z:ar11
# D11 (servo) on mcu_z
sensor_type: NTC 100K MGB18-104F39050L32
# NTC 100K MGB18-104F39050L32 is for Keenovo thermistors
sensor_pin: z:analog15
# T2 on mcu_z
smooth_time: 3.0
max_power: 0.75
control: pid
pid_Kp=47.690
pid_Ki=1.556
pid_Kd=365.338
min_temp: 0
max_temp: 110
[verify_heater heater_bed]
max_error: 120
# The maximum "cumulative temperature error" before raising an
# error. Smaller values result in stricter checking and larger
# values allow for more time before an error is reported.
# Specifically, the temperature is inspected once a second and if it
# is close to the target temperature then an internal "error
# counter" is reset; otherwise, if the temperature is below the
# target range then the counter is increased by the amount the
# reported temperature differs from that range. Should the counter
# exceed this "max_error" then an error is raised. The default is
# 120.
check_gain_time: 60
# This controls heater verification during initial heating. Smaller
# values result in stricter checking and larger values allow for
# more time before an error is reported. Specifically, during
# initial heating, as long as the heater increases in temperature
# within this time frame (specified in seconds) then the internal
# "error counter" is reset. The default is 20 seconds for extruders
# and 60 seconds for heater_bed.
hysteresis: 5
# The maximum temperature difference (in Celsius) to a target
# temperature that is considered in range of the target. This
# controls the max_error range check. It is rare to customize this
# value. The default is 5.
heating_gain: 2
# The minimum temperature (in Celsius) that the heater must increase
# by during the check_gain_time check. It is rare to customize this
# value. The default is 2.
[verify_heater extruder]
max_error: 120
check_gain_time: 20
hysteresis: 5
heating_gain: 2
[homing_override]
axes: z
set_position_z: 0
gcode:
G90
G0 Z5 F600
G90
G28 X Y
G0 X272 Y350 F3600
# XY Location of the FSR Switch. Update to your machines XY location.
G28 Z0
G0 Z10 F1800
G0 X175 Y175 Z10 F3600
[quad_gantry_level]
# Use QUAD_GANTRY_LEVEL to level a gantry.
gantry_corners:
-58,-7
408,418
# Min & Max gantry corners - measure from nozzle at MIN (0,0) and MAX (350,350) to respective belt positions
points:
60,60
60,290
290,290
290,60
# Probe points
speed: 200
# The speed (in mm/s) of non-probing moves during the calibration.
# The default is 50.
horizontal_move_z: 5
# The height (in mm) that the head should be commanded to move to
# just prior to starting a probe operation. The default is 5
retries: 5
# number of times to retry if the stepper movements aren't within tolerance
retry_tolerance: 0.0075
# if retries are enabled then retry if any z_stepper movement was greater
# than the retry_tolerance
[display]
# RepRapDiscount 128x64 Full Graphic Smart Controller
lcd_type: st7920
cs_pin: z:ar16
sclk_pin: z:ar23
sid_pin: z:ar17
# LCD connector on mcu_z
menu_timeout: 40
# Timeout for menu. Being inactive this amount of seconds will exit the menu
# Default is 0 seconds (disabled)
encoder_pins: ^z:ar33, ^z:ar31
click_pin: ^!z:ar35
kill_pin: ^!z:ar41
### Macros ###
[gcode_macro G32]
gcode:
G28
QUAD_GANTRY_LEVEL
G28 Z0
G0 X175 Y175 Z10 F6000
[gcode_macro PRINT_START]
# Use PRINT_START for the slicer starting script - please customize for your slicer of choice
gcode:
M117 Homing... ; display message
G28 ; home all axes
G1 Z20 F3000 ; move nozzle away from bed
M117 Preheat (Print) ; display message
[gcode_macro PRINT_END]
# Use PRINT_END for the slicer ending script - please customize for your slicer of choice
gcode:
M400 ; wait for buffer to clear
G92 E0 ; zero the extruder
G1 E-4.0 F3600 ; retract filament
G91 ; relative positioning
G0 Z1.00 X20.0 Y20.0 F20000 ; move nozzle to remove stringing
TURN_OFF_HEATERS
M107 ; turn off fan
G1 Z5 F3000 ; move nozzle up 5mm
G90 ; absolute positioning
G0 X175 Y350 F3600 ; park nozzle at rear
M117 Finished! ; display message
[gcode_macro UNLOAD_FILAMENT]
# Extrusion lengths must be adjusted for your particular configuration before use
gcode:
M83 ; set extruder to relative
G1 E10 F300 ; extrude a little to soften tip
G1 E-780 F1800 ; retract filament completely
M82 ; set extruder to absolute
[gcode_macro LOAD_FILAMENT]
# Extrusion lengths must be adjusted for your particular configuration before use
gcode:
M83 ; set extruder to relative
G1 E750 F1800 ; quickly load filament to down bowden
G1 E30 F300 ; slower extrusion for hotend path
G1 E15 F150 ; prime nozzle with filament
M82 ; set extruder to absolute
# Sensor Types
# "EPCOS 100K B57560G104F"
# "ATC Semitec 104GT-2"
# "NTC 100K beta 3950"
# "Honeywell 100K 135-104LAG-J01"
# "NTC 100K MGB18-104F39050L32" (Keenovo Heater Pad)
# "AD595"
# "PT100 INA826"