Added more entries to the list
This commit is contained in:
Nikolaj Mørup
parent
41428404e6
commit
7f01e74a9c
114
Mods/README.md
114
Mods/README.md
@ -19,23 +19,123 @@ The list should be structured in the following way:
|
||||
|
||||
---
|
||||
|
||||
## 3D_Black
|
||||
|
||||
[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/Mods/3D_Black)
|
||||
|
||||
- Different fan covers for 40mm fans
|
||||
|
||||
## Andreq
|
||||
|
||||
[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Andreq/VORON2)
|
||||
|
||||
- Tool used for grinding flats on a shaft at specific places
|
||||
|
||||
## ArmyAg08
|
||||
|
||||
[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Logitech_C270_Mounts)
|
||||
|
||||
- Different C270 camera mounts, attached to the extrusions
|
||||
|
||||
[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Panels)
|
||||
|
||||
- Corner panel clip that fit 3mm or 1/8" panels with foam tape
|
||||
|
||||
## Danowar
|
||||
|
||||
[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/F6_Board_Mount)
|
||||
|
||||
- Mounts for FYSETCS F6 controller boards
|
||||
|
||||
[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
|
||||
|
||||
- Klipper config for a FYSETC F6 350 build.
|
||||
|
||||
[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Load_Cell_Spool_Holder)
|
||||
|
||||
- Spool holder with built in weight scale
|
||||
|
||||
[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Tablet_Mount)
|
||||
|
||||
- Detachable mount for tablet using magnets
|
||||
|
||||
## FHeilmann
|
||||
|
||||
[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2_5mm_Parts)
|
||||
|
||||
- Parts modified for extrusions with 5mm gap
|
||||
|
||||
[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2.1_5mm_parts)
|
||||
|
||||
- Parts modified for extrusions with 5mm gap
|
||||
|
||||
## Fulg
|
||||
|
||||
[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Fulg/VORON2/PanelDue5)
|
||||
|
||||
- Mount for the PanelDue5 LCD display
|
||||
|
||||
## GSL12
|
||||
|
||||
[Wago 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount)
|
||||
|
||||
## Glowtape
|
||||
|
||||
[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Glowtape)
|
||||
|
||||
## GustavTheMighty
|
||||
|
||||
[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GustavtheMighty/4.3-Paneldue_Case)
|
||||
|
||||
- Case/mount for the 4.3 PanelDue LCD Display
|
||||
|
||||
## Hackdoggo
|
||||
|
||||
[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Hackdoggo/V2/BMGobius)
|
||||
|
||||
- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears
|
||||
|
||||
## Jass_on
|
||||
|
||||
[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on/Voron_2.1.1_Tempered_Glass)
|
||||
|
||||
- Panel clips and handles for using tempered glass side panels
|
||||
|
||||
[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
|
||||
|
||||
[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
|
||||
|
||||
- SKR 1.3 mount with built in 40mm fan mount
|
||||
|
||||
## JeJeff
|
||||
|
||||
[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
|
||||
|
||||
- Slot covers for extrusions with 5mm slot width
|
||||
|
||||
[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Cable_Tie_Mount)
|
||||
|
||||
- Cable tie mounts for 4mm cable ties
|
||||
|
||||
[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
|
||||
|
||||
- Main Plug Panel modified to hold a RJ45 ethernet socket
|
||||
|
||||
## wile.e.coyote
|
||||
|
||||
Coroplast Support
|
||||
[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Support for the coroplast to prevent sagging
|
||||
|
||||
Dual Buck Bracket
|
||||
[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Mounting bracket for 2 buck converters
|
||||
"Link or description of used buck converters here"
|
||||
|
||||
Nozzle Scrubber Mount
|
||||
[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Mount for brass brush used for cleaning nozzle before printing
|
||||
"Link or description of used buck converters here"
|
||||
- Mount for brass brush. Used for cleaning nozzle before printing
|
||||
|
||||
Wago Mounts
|
||||
[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
|
||||
|
||||
- Different mounts for Wago connectors
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user