From 7f01e74a9c909e3e38e728b442ce24e125a48021 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Nikolaj=20M=C3=B8rup?= <71891@grundfos.com>
Date: Mon, 29 Jul 2019 19:23:40 +0200
Subject: [PATCH] Added more entries to the list

---
 Mods/README.md | 114 ++++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 107 insertions(+), 7 deletions(-)

diff --git a/Mods/README.md b/Mods/README.md
index 77b8ae6..3261452 100644
--- a/Mods/README.md
+++ b/Mods/README.md
@@ -19,23 +19,123 @@ The list should be structured in the following way:
   
 ---
 
+## 3D_Black
+
+[Fan Covers](https://github.com/VoronDesign/Voron-2/tree/master/Mods/3D_Black)  
+
+- Different fan covers for 40mm fans  
+  
+## Andreq
+
+[Mobius Shaft Jig](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Andreq/VORON2)
+
+- Tool used for grinding flats on a shaft at specific places
+
+## ArmyAg08
+
+[Logitech C270 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Logitech_C270_Mounts)
+
+- Different C270 camera mounts, attached to the extrusions
+
+[Corner Panel Clip](https://github.com/VoronDesign/Voron-2/tree/master/Mods/ArmyAg08/Panels)
+
+- Corner panel clip that fit 3mm or 1/8" panels with foam tape
+
+## Danowar
+
+[F6 Board Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/F6_Board_Mount)
+
+- Mounts for FYSETCS F6 controller boards
+
+[FYSETC F6 1.3 Klipper Config](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/FYSETC_F6_V1.3_Klipper_Config)
+
+- Klipper config for a FYSETC F6 350 build.
+
+[Load Cell Spool Holder](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Load_Cell_Spool_Holder)
+
+- Spool holder with built in weight scale
+
+[Tablet mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Danowar/Tablet_Mount)
+
+- Detachable mount for tablet using magnets
+
+## FHeilmann
+
+[Voron 2.0 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2_5mm_Parts)
+
+- Parts modified for extrusions with 5mm gap
+
+[Voron 2.1 5mm Parts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/FHeilmann/VORON2.1_5mm_parts)
+
+- Parts modified for extrusions with 5mm gap
+
+## Fulg
+
+[PanelDue5 LCD Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Fulg/VORON2/PanelDue5)
+
+- Mount for the PanelDue5 LCD display
+
+## GSL12
+
+[Wago 221 Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GSL12/wago_221_mount)  
+
+## Glowtape
+
+[MKS GenL 1.0 Mounting Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Glowtape)
+
+## GustavTheMighty
+
+[4.3 PanelDue Case](https://github.com/VoronDesign/Voron-2/tree/master/Mods/GustavtheMighty/4.3-Paneldue_Case)
+
+- Case/mount for the 4.3 PanelDue LCD Display
+
+## Hackdoggo
+
+[BMGobius](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Hackdoggo/V2/BMGobius)
+
+- Modification to MZBot's Mobius Extruder to use dual drive Bondtech drivegears
+
+## Jass_on
+
+[Tempered glass clips/handle](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on/Voron_2.1.1_Tempered_Glass)
+
+- Panel clips and handles for using tempered glass side panels
+
+[Rear panel clips](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
+
+[SKR 1.3 Cooling bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/Jass_on)
+
+- SKR 1.3 mount with built in 40mm fan mount
+
+## JeJeff
+
+[2020 Extrusion slot cover](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/2020_5mm_Slot_Cover)
+
+- Slot covers for extrusions with 5mm slot width
+
+[Cable Tie Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Cable_Tie_Mount)
+
+- Cable tie mounts for 4mm cable ties
+
+[Main Plug Panel](https://github.com/VoronDesign/Voron-2/tree/master/Mods/JeJeff/VORON2.1/Mains_Plug_Panel_with_RJ45_Panel_Mount)
+
+- Main Plug Panel modified to hold a RJ45 ethernet socket
+
 ## wile.e.coyote  
 
-Coroplast Support
+[Coroplast Support](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)
 
 - Support for the coroplast to prevent sagging
 
-Dual Buck Bracket  
+[Dual Buck Bracket](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
 
 - Mounting bracket for 2 buck converters  
-  "Link or description of used buck converters here"
 
-Nozzle Scrubber Mount  
+[Nozzle Scrubber Mount](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
 
-- Mount for brass brush used for cleaning nozzle before printing  
-  "Link or description of used buck converters here"  
+- Mount for brass brush. Used for cleaning nozzle before printing  
 
-Wago Mounts  
+[Wago Mounts](https://github.com/VoronDesign/Voron-2/tree/master/Mods/wile.e.coyote)  
 
 - Different mounts for Wago connectors