SKR update (#206)
This commit is contained in:
Joshua Longenecker
parent
4493c4be66
commit
6cf0c6d3bc
GPG Key ID:
4AEE18F83AFDEB23
@ -84,8 +84,8 @@ kinematics: corexy
|
||||
max_velocity: 300
|
||||
max_accel: 3000 #Max 4000
|
||||
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
|
||||
max_z_accel: 350 #Max ?
|
||||
square_corner_velocity: 5.0 #Can experiment with 8.0, default 5.0
|
||||
max_z_accel: 350
|
||||
square_corner_velocity: 5.0
|
||||
|
||||
#####################################################################
|
||||
# X/Y Stepper Settings
|
||||
@ -98,7 +98,7 @@ dir_pin: !P2.6
|
||||
enable_pin: !P2.1
|
||||
rotation_distance: 40
|
||||
microsteps: 16
|
||||
# full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
endstop_pin: P1.28
|
||||
position_min: 0
|
||||
##--------------------------------------------------------------------
|
||||
@ -121,7 +121,7 @@ homing_retract_dist: 5
|
||||
homing_positive_dir: true
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_x]
|
||||
[tmc2209 stepper_x]
|
||||
uart_pin: P1.17
|
||||
interpolate: True
|
||||
run_current: 0.8
|
||||
@ -136,7 +136,7 @@ dir_pin: !P0.20
|
||||
enable_pin: !P2.8
|
||||
rotation_distance: 40
|
||||
microsteps: 16
|
||||
# full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
endstop_pin: P1.26
|
||||
position_min: 0
|
||||
##--------------------------------------------------------------------
|
||||
@ -159,7 +159,7 @@ homing_retract_dist: 5
|
||||
homing_positive_dir: true
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_y]
|
||||
[tmc2209 stepper_y]
|
||||
uart_pin: P1.15
|
||||
interpolate: True
|
||||
run_current: 0.8
|
||||
@ -199,12 +199,12 @@ position_endstop: -0.5
|
||||
|
||||
##--------------------------------------------------------------------
|
||||
position_min: -5
|
||||
homing_speed: 15.0
|
||||
second_homing_speed: 3.0
|
||||
homing_retract_dist: 3.0
|
||||
homing_speed: 8
|
||||
second_homing_speed: 3
|
||||
homing_retract_dist: 3
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z]
|
||||
[tmc2209 stepper_z]
|
||||
uart_pin: z:P1.17
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -223,7 +223,7 @@ gear_ratio: 80:16
|
||||
microsteps: 16
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z1]
|
||||
[tmc2209 stepper_z1]
|
||||
uart_pin: z:P1.15
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -242,7 +242,7 @@ gear_ratio: 80:16
|
||||
microsteps: 16
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z2]
|
||||
[tmc2209 stepper_z2]
|
||||
uart_pin: z:P1.10
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -261,7 +261,7 @@ gear_ratio: 80:16
|
||||
microsteps: 16
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z3]
|
||||
[tmc2209 stepper_z3]
|
||||
uart_pin: z:P1.8
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -279,13 +279,17 @@ stealthchop_threshold: 0
|
||||
step_pin: P2.13
|
||||
dir_pin: P0.11
|
||||
enable_pin: !P2.12
|
||||
## 16 microsteps Mobius 3 ~= 0.00180
|
||||
## Update value below when you perform extruder calibration
|
||||
## If you ask for 100mm of filament, but in reality it is 98mm:
|
||||
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
|
||||
## 7.68 a good starting value for Afterburner, 5.76 for Mobius
|
||||
rotation_distance: 7.68
|
||||
## 22.6789511 is a good starting point
|
||||
rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
|
||||
## Update Gear Ratio depending on your Extruder Type
|
||||
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
|
||||
## Use 80:20 for M4, M3.1
|
||||
gear_ratio: 50:17
|
||||
microsteps: 16
|
||||
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.75
|
||||
heater_pin: P2.7
|
||||
@ -307,7 +311,7 @@ pressure_advance_smooth_time: 0.040
|
||||
|
||||
## E0 on MCU X/Y
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX extruder]
|
||||
[tmc2209 extruder]
|
||||
uart_pin: P1.9
|
||||
interpolate: false
|
||||
run_current: 0.5
|
||||
@ -322,7 +326,7 @@ stealthchop_threshold: 0
|
||||
[heater_bed]
|
||||
## SSR Pin - Z board, Fan Pin
|
||||
heater_pin: z:P2.3
|
||||
sensor_type: NTC 100K MGB18-104F39050L32
|
||||
sensor_type: NTC 100K beta 3950
|
||||
sensor_pin: z:P0.23
|
||||
## Adjust Max Power so your heater doesn't warp your bed
|
||||
max_power: 0.6
|
||||
@ -398,10 +402,13 @@ heater_temp: 45.0
|
||||
#####################################################################
|
||||
|
||||
#[output_pin caselight ]
|
||||
# Chamber Lighting - Bed Connector (Optional)
|
||||
#pin: P2.5
|
||||
#pwm: true
|
||||
#value: 0
|
||||
#scale: 10
|
||||
#pwm:true
|
||||
#shutdown_value: 0
|
||||
#value:100
|
||||
#cycle_time: 0.01
|
||||
#scale: 100
|
||||
|
||||
#####################################################################
|
||||
# Homing and Gantry Adjustment Routines
|
||||
|
||||
@ -84,8 +84,8 @@ kinematics: corexy
|
||||
max_velocity: 300
|
||||
max_accel: 3000 #Max 4000
|
||||
max_z_velocity: 15 #Max 15 for 12V TMC Drivers, can increase for 24V
|
||||
max_z_accel: 350 #Max ?
|
||||
square_corner_velocity: 5.0 #Can experiment with 8.0, default 5.0
|
||||
max_z_accel: 350
|
||||
square_corner_velocity: 5.0
|
||||
|
||||
#####################################################################
|
||||
# X/Y Stepper Settings
|
||||
@ -98,7 +98,7 @@ dir_pin: !P2.6
|
||||
enable_pin: !P2.1
|
||||
rotation_distance: 40
|
||||
microsteps: 16
|
||||
# full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
endstop_pin: P1.29
|
||||
position_min: 0
|
||||
##--------------------------------------------------------------------
|
||||
@ -121,7 +121,7 @@ homing_retract_dist: 5
|
||||
homing_positive_dir: true
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_x]
|
||||
[tmc2209 stepper_x]
|
||||
uart_pin: P1.10
|
||||
interpolate: True
|
||||
run_current: 0.8
|
||||
@ -136,7 +136,7 @@ dir_pin: !P0.20
|
||||
enable_pin: !P2.8
|
||||
rotation_distance: 40
|
||||
microsteps: 16
|
||||
# full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
full_steps_per_rotation:200 #set to 400 for 0.9 degree stepper
|
||||
endstop_pin: P1.28
|
||||
position_min: 0
|
||||
##--------------------------------------------------------------------
|
||||
@ -159,7 +159,7 @@ homing_retract_dist: 5
|
||||
homing_positive_dir: true
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_y]
|
||||
[tmc2209 stepper_y]
|
||||
uart_pin: P1.9
|
||||
interpolate: True
|
||||
run_current: 0.8
|
||||
@ -199,12 +199,12 @@ position_endstop: -0.5
|
||||
|
||||
##--------------------------------------------------------------------
|
||||
position_min: -5
|
||||
homing_speed: 15.0
|
||||
second_homing_speed: 3.0
|
||||
homing_retract_dist: 3.0
|
||||
homing_speed: 8
|
||||
second_homing_speed: 3
|
||||
homing_retract_dist: 3
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z]
|
||||
[tmc2209 stepper_z]
|
||||
uart_pin: z:P1.10
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -223,7 +223,7 @@ gear_ratio: 80:16
|
||||
microsteps: 16
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z1]
|
||||
[tmc2209 stepper_z1]
|
||||
uart_pin: z:P1.9
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -242,7 +242,7 @@ gear_ratio: 80:16
|
||||
microsteps: 16
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z2]
|
||||
[tmc2209 stepper_z2]
|
||||
uart_pin: z:P1.8
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -261,7 +261,7 @@ gear_ratio: 80:16
|
||||
microsteps: 16
|
||||
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX stepper_z3]
|
||||
[tmc2209 stepper_z3]
|
||||
uart_pin: z:P1.4
|
||||
interpolate: true
|
||||
run_current: 0.8
|
||||
@ -279,13 +279,17 @@ stealthchop_threshold: 0
|
||||
step_pin: P2.13
|
||||
dir_pin: P0.11
|
||||
enable_pin: !P2.12
|
||||
## 16 microsteps Mobius 3 ~= 0.00180
|
||||
## Update value below when you perform extruder calibration
|
||||
## If you ask for 100mm of filament, but in reality it is 98mm:
|
||||
## rotation_distance = <previous_rotation_distance> * <actual_extrude_distance> / 100
|
||||
## 7.68 a good starting value for Afterburner, 5.76 for Mobius
|
||||
rotation_distance: 7.68
|
||||
## 22.6789511 is a good starting point
|
||||
rotation_distance: 22.6789511 #Bondtech 5mm Drive Gears
|
||||
## Update Gear Ratio depending on your Extruder Type
|
||||
## Use 50:17 for Afterburner/Clockwork (BMG Gear Ratio)
|
||||
## Use 80:20 for M4, M3.1
|
||||
gear_ratio: 50:17 #BMG Gear Ratio
|
||||
microsteps: 16
|
||||
full_steps_per_rotation: 200 #200 for 1.8 degree, 400 for 0.9 degree
|
||||
nozzle_diameter: 0.400
|
||||
filament_diameter: 1.75
|
||||
heater_pin: P2.7
|
||||
@ -307,7 +311,7 @@ pressure_advance_smooth_time: 0.040
|
||||
|
||||
## E0 on MCU X/Y
|
||||
## Make sure to update below for your relevant driver (2208 or 2209)
|
||||
[tmcXXXX extruder]
|
||||
[tmc2209 extruder]
|
||||
uart_pin: P1.4
|
||||
interpolate: false
|
||||
run_current: 0.5
|
||||
@ -322,7 +326,7 @@ stealthchop_threshold: 0
|
||||
[heater_bed]
|
||||
## SSR Pin - Z board, Fan Pin
|
||||
heater_pin: z:P2.3
|
||||
sensor_type: NTC 100K MGB18-104F39050L32
|
||||
sensor_type: NTC 100K beta 3950
|
||||
sensor_pin: z:P0.25
|
||||
## Adjust Max Power so your heater doesn't warp your bed
|
||||
max_power: 0.6
|
||||
@ -353,7 +357,6 @@ sample_retract_dist: 3.0
|
||||
samples_tolerance: 0.006
|
||||
samples_tolerance_retries: 3
|
||||
|
||||
|
||||
#####################################################################
|
||||
# Fan Control
|
||||
#####################################################################
|
||||
@ -399,10 +402,13 @@ heater_temp: 45.0
|
||||
#####################################################################
|
||||
|
||||
#[output_pin caselight ]
|
||||
# Chamber Lighting - Bed Connector (Optional)
|
||||
#pin: P2.5
|
||||
#pwm: true
|
||||
#value: 0
|
||||
#scale: 10
|
||||
#pwm:true
|
||||
#shutdown_value: 0
|
||||
#value:100
|
||||
#cycle_time: 0.01
|
||||
#scale: 100
|
||||
|
||||
#####################################################################
|
||||
# Homing and Gantry Adjustment Routines
|
||||
|
||||
Loading…
Reference in New Issue
Block a user