5.1 KiB
5.1 KiB
What do you get in the package?
With your DIY kit, you will receive:
| Description | Images |
|---|---|
| PCB1 (PCB1-A64-MAIN) – main PCB with A64 processor, 2GB RAM, 16GB eMMC. It is in an ESD protective bag. Please handle with proper anti-static precautions |  |
| PCB2 (TERES-PCB2-IO) – IO PCB with microphone, connectors for: speaker, USB, SD-card, headphones |  |
| PCB3 (TERES-PCB3-TOUCH-BTN) – TOUCH two button PCB |  |
| PCB4 – PWR PCB (PCB4-PWR-BTN) with button for power on/off |  |
| PCB5 (TERES-PCB5-KEYBOARD) – KEYBOARD PCB with controller of the keyboard and touchpad |  |
| Bottom body plastic part, packed in bubble wrap to protect from scratches |   |
| Keyboard body plastic assembly |   |
| LCD plastic frame |   |
| LCD back plastic body |   |
| Plastic power button |   |
| Plastic touch buttons |   |
| Left speaker |   |
| Right speaker |   |
| Transparent LED pipe |   |
| Set of screws: M2x1.5 mm – 4 pcs; M2x3 mm – 9 pcs; M2x4 mm – 17 pcs; M2x5 mm – 12 pcs |   |
| eDP 11.6" HD (1366x768) LCD. It has protective foil on top. Datasheet |   |
| Left and right hinges |   |
| Mat set. There are four rubber pads for the bottom of the laptop, two circular pads for LCD frame screws cover and four self adhesive mats for holding the battery. |   |
| Magnet for the lid close sensor |   |
| Camera [Datasheet] |   |
| Camera lens |   |
| Two dust protectors – big and small |   |
| Touchpad cover |    |
| Touchpad |  |
| LiPo battery 9500 mAh [Datasheet] |  |
| WiFi/Bluetooth antenna |   |
| LCD/camera cable |   |
| Flat cable Main-IO |   |
| Flat cable Power-Main, Flat cable Main-Keyboard |   |
| Flat cable Touchpad-TouchButtons |   |
| Flat cable Keyboard-TouchButtons |  |
| Power adapter EU Style 5V 3A with 3 meter cable and LED status GREEN/RED indicator with UK and US plug adapters |    |