125 lines
3.1 KiB
C
125 lines
3.1 KiB
C
/* Simulacni verze ovladace pro GPIO piny drv_gpio */
|
|
|
|
/*
|
|
* @file drv_gpio.h
|
|
* @brief Simple GPIO driver for LED and push buttons Freescale KL25Z
|
|
* @version V1.00
|
|
* @date 17. July 2015
|
|
*
|
|
* @note
|
|
*
|
|
* Ukazkovy program pro Programovani mikropocitacu
|
|
* Ovladac pro LED a tlacitka. Umoznuje ovladat tlacitka na vyvojovem kitu
|
|
* s FRDM-KL25Z ve stylu jako Arduino funkce digitalRead, digitalWrite and pinMode.
|
|
*
|
|
* Pozor: toto neni priklad univerzalniho ovladace pro mapovani nejakych cisel/nazvu pinu
|
|
* na fyzicke piny mikrokontroleru. Piny jsou mapovany primitivne, natvrdo pomoc switch.
|
|
* Nazvy funkci neodpovidaji doporucene konvenci {nazev_ovladace}_{nazev_funkce}, aby byla
|
|
* zajistena jejich podobnost funkcim Arduina, ktere jsou obecne zname.
|
|
*
|
|
* Vyjimky z doporucenych konvenci kvuli strucnejsimu zapisu programu:
|
|
* - funkce pinWrite, pinMode, pinRead nezacinaji predponou modulu (GPIO)
|
|
* - nazvy polozek vyctovych typu (enum) neobsahuji nazev modulu (GPIO).
|
|
*
|
|
*
|
|
*/
|
|
#ifndef UTBFRDM_DRV_GPIO_H
|
|
#define UTBFRDM_DRV_GPIO_H
|
|
|
|
|
|
#include <inttypes.h>
|
|
|
|
//#ifdef __cplusplus
|
|
//extern "C" {
|
|
//#endif
|
|
|
|
/** \ingroup UTB_FRDM_Drivers
|
|
\defgroup UTB_FRDM_NewDriver New Driver for FRDM-KL25Z
|
|
@{
|
|
*/
|
|
|
|
/** Available pins
|
|
* Hodnoty prvku jsou cisla pinu. Port neni resen, ten musi byt "hard-coded" ve funkcich.
|
|
* */
|
|
typedef enum _utb_frdm_gpio_pins
|
|
{
|
|
LD1 = 0,
|
|
LD2 = 1,
|
|
LD3 = 2,
|
|
LED_RED = 3,
|
|
LED_GREEN = 4,
|
|
LED_BLUE = 5,
|
|
SW1 = 6,
|
|
SW2 = 7,
|
|
SW3 = 8,
|
|
SW4 = 9,
|
|
LAST_PIN,
|
|
/*
|
|
INVALID_PIN = 0xFF,
|
|
LD1 = 8,
|
|
LD2 = 9,
|
|
LD3 = 10,
|
|
LED_RED = 18,
|
|
LED_GREEN = 19,
|
|
SW1 = 4,
|
|
SW2 = 5,
|
|
SW3 = 16,
|
|
SW4 = 17,
|
|
LAST_PIN,
|
|
*/
|
|
} FRDM_kit_pin;
|
|
|
|
/** Mozne hodnoty zapisovane na pin */
|
|
#define HIGH (1) /* log. 1 */
|
|
#define LOW (0) /* log. 0 */
|
|
|
|
/* Mozne rezimy pinu */
|
|
typedef enum _utb_frdm_pin_modes
|
|
{
|
|
INPUT,
|
|
OUTPUT,
|
|
INPUT_PULLUP,
|
|
} FRDM_kit_pinmode;
|
|
|
|
|
|
|
|
/**
|
|
* @brief Initialize the gpio driver for LEDs and push buttons.
|
|
* @param param Must be one of the values defined in UART0_baudrate enum!
|
|
* @return none
|
|
* @note It will enable the clock for the ports as required.
|
|
*/
|
|
void GPIO_Initialize(void);
|
|
|
|
/**
|
|
* @brief Configure given pin to behave as input or output.
|
|
* @param pin Pin to configure. Must be one of the values defined in FRDM_kit_pin enum!
|
|
* @param mode Mode to use for the pin. Can be INPUT, OUTPUT or INPUT_PULLUP.
|
|
* @return none
|
|
* @note
|
|
*/
|
|
void pinMode(FRDM_kit_pin pin, FRDM_kit_pinmode mode );
|
|
|
|
/**
|
|
* @brief Set value for given pin. The pin must be configured as output with pinMode first!
|
|
* @param pin Pin to set. Must be one of the values defined in FRDM_kit_pin enum!
|
|
* @param value Value to write to the pin. The value can be HIGH or LOW.
|
|
* @return none
|
|
* @note
|
|
*/
|
|
void pinWrite(FRDM_kit_pin pin, uint8_t value );
|
|
|
|
/**
|
|
* @brief Read value on given pin. The pin must be configured as input with pinMode first!
|
|
* @param pin Pin to read from. Must be one of the values defined in FRDM_kit_pin enum!
|
|
* @return HIGH or LOW value depending on the voltage level on the pin.
|
|
* @note
|
|
*/
|
|
uint8_t pinRead(FRDM_kit_pin pin);
|
|
|
|
/*@} end of UTB_FRDM_NewDriver */
|
|
|
|
|
|
#endif /* UTBFRDM_DRV_ name _H */
|
|
|