This just adds a small quality of life improvement to the cursor hiding
functionality. The cursor will no longer be hidden unless all buttons
are released.
This enhances the opacity command to support relative assignment as well
as the currently implemented absolute assignment. The syntax is copied
from the same format that gaps uses for relative and absolute setting.
An example usage in a sway config looks like:
// relative change (this feature)
bindsym button4 opacity plus .1
bindsym button5 opacity minus .1
// absolute change (this feature)
bindsym button4 opacity set 1
bindsym button5 opacity set .3
// old way, still supported
bindsym button4 opacity 1
bindsym button5 opacity .3
This adds support for specifying a binding for a specific group. Any
binding without a group listed will be available in all groups. The
priority for matching bindings is as follows: input device, group, and
locked state.
For full compatibility with i3, this also adds Mode_switch as an alias
for Group2. Since i3 only supports this for backwards compatibility
with older versions of i3, it is implemented here, but not documented.
In sway_keyboard_config, do not change the keymap when the new keymap
is unchanged, unless this is during a config reload. The reasoning for
this is to prevent the effective layout from being reset to index 0 for
input config changes unrelated to the keymap.
This just fixes the check in set_send_events for whether the mode has
changed. LIBINPUT_CONFIG_SEND_EVENTS_ENABLED is 0 so the bitmask check
cannot be fixed, but Sway doesn't allow multiple modes to be set anyway
(not really sure why you would need to) so a basic equality check works
Sibling amounts were being calculated after the original fraction had
been altered. This led to broken resize amounts. Fix that by calculating
things upfront before adjusting values which also makes the code
cleaner.
For sanity checks also calculate the sibling amount with the
ceiling so we never go below the sanity check even by one pixel.
Fixes #4386
The documentation for wayland-server.h says:
> Use of this header file is discouraged. Prefer including
> wayland-server-core.h instead, which does not include the server protocol
> header and as such only defines the library PI, excluding the deprecated API
> below.
Replacing wayland-server.h with wayland-server-core.h allows us to drop the
WL_HIDE_DEPRECATED declaration.
This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h
includes").
When arranging the workspace, prev_x and prev_y should be ignoring the
current gaps otherwise the workspace diff_x and diff_y location deltas
will be off. When the deltas are off, each arrangement of the workspace
would incorrectly move floaters an extra -workspace->current_gaps.left
along the x-axis and an extra -workspace->current_gaps.top along the
y-axis.
This adds a libinput_config change type to the input event for when
the libinput config for a device changes
In order for this to be possible to track, the libinput config code
had to be refactored. It is now extracted into a separate file to
isolate it from the rest of the input management code.
This adds an ipc event related to input devices. Currently the
following changes are supported:
- added: when an input device becomes available
- removed: when an input device is no longer available
- xkb_keymap_changed: (keyboards only) the keymap changed
- xkb_layout_changed: (keyboards only) the effective layout changed
Similar to seat command, this provides an alias for the current output.
Instead of the output name or identifier, `-` can be used to operate on
the focused output by name and `--` can be used to operate on the
focused output by its identifier. This will prevent operating on the
no-op output when using either alias.
Adds a new commend "xkb_file", which constructs the internal
xkb_keymap from a xkb file rather than an RMLVO configuration.
This allows greater flexibility when specifying xkb configurations.
An xkb file can be dumped with the xkbcomp program.
Instead of tracking gaps per child apply gaps in two logical places:
1. In tiled containers use the layout code to add the gaps between
windows. This is much simpler and guarantees that the sizing of children
is correct.
2. In the workspace itself apply all the gaps around the edge. Here
we're in the correct position to size inner and outer gaps correctly and
decide on smart gaps in a single location.
Fixes #4296
Because meson does not provide a simple way to get the relative build
path, it is computed with a pair of foreach loops. As meson does not
have a simple way to compute string length (except via underscorify
and 63 split operations), the build script uses a shell command
instead.
If the compiler does not suppot -fmacro-prefix-map, then fall back
to passing in the relative path prefix, and use its length to offset
the uses of __FILE__ in log messages so that the build path is at
least still not included in the logs. This is significantly more
efficient than calling _sway_strip_path.
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.
To do this several parts are reworked:
- The vertical and horizontal arrangement code is ajusted to work with
fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
match. The adjusted parts are container split, swap, and the input
seat code.
It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.
Fixes #3547
Fixes #4297
If there is more than one new window layout correctly by calculating the
default size of the new windows using the information of how many of
them there are in total.
This helps with issue #3547 but doesn't fix it in all situations. Things
now work correctly if the first layout of new windows happens after
leaving fullscreen. But if for some reason an arrange_container() gets
called while we are fullscreen the windows will still be incorrectly
sized after saved_width/saved_height get used to restore the first
window's size before going fullscreen.
Previously, `layout toggle` and `layout toggle split` would set L_VERT
when layout was L_HORIZ, otherwise it would set L_HORIZ. This meant
that when the layout was L_TABBED or L_STACKED, it would always be
L_HORIZ. This extends #4315 (which corrects the handling when multiple
layouts are given) to try prev_split_layout,
config->default_orientation, and then falling back to L_VERT when the
output is taller than wide and L_HORIZ when wider than tall.
This fixes the logic of split for layout toggle when the default
layout is L_TABBED or L_STACKED. When the default layout is L_TABBED
or L_STACKED, the container/workspace may not have a prev_split_layout.
This was causing L_NONE to be returned by get_layout_toggle, which was
being handled as a syntax error. This adds logic to try
config->default_orientation when prev_split_layout is L_NONE. If that
is also L_NONE, then L_VERT is used when the output is taller than
wide, otherwise, L_HORIZ is used.
In apply_output_config, this sets output->{width,height} using the
values in the output box. Previously, they were being set using
wlr_output_transformed_resolution, which takes the width and height
from the wlr_output and just checks whether they should be swapped
based on the transform. This did not take into account the output's
scale. wlr_output_effective_resolution could be used instead, which
handles both transform and scale. However, the values in the output box
have already been processed by wlr_output_effective_resolution so they
can just be used directly
This adds checks to the input_manager_libinput_reset_* functions to
only attempt resetting supported options on reload. This should have no
functional difference to the user, but will remove several `Failed to
apply libinput config: Unsupported configuration option` lines from the
log that can be noisy and potential red herrings.
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
This corrects the description of border_{top,bottom,left,right} in the
block properties table in swaybar-protocol.7. The values should be an
integer denoting the width/height rather than a boolean denoting
whether to show them.
This change mimics the wlroots protocol meson.build. It replaces
meson generators with custom_targets, which will only run wayland-scanner
once per output file.
The idle protocol is not used by any clients, so its client protocol
header is not generated.
The check for the availability of the private-code scanner options has
been removed, since the wlroots dependency requires wayland >= 1.16.
The function used for comparing two output names in the workspace
output priority lists was inverted. This was causing priority to not be
stored correctly resulting in workspaces not always being restored or
moved to the desired outputs
