openwrt

mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-11-20 07:24:36 +01:00

OpenWrt Source Repository https://openwrt.org/

Go to file

Gabor Juhos ff92681121 register GPIO LEDs on the WHR-G300N board SVN-Revision: 17449		2009-08-31 09:14:18 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	add support for build system overlays that alter package build instructions currently unused, will probably be managed by the feeds system later	2009-08-31 01:11:25 +00:00
package	uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	2009-08-29 11:56:27 +00:00
scripts	add hg support to getver.sh (patch from #5763 )	2009-08-28 12:51:01 +00:00
target	register GPIO LEDs on the WHR-G300N board	2009-08-31 09:14:18 +00:00
toolchain	uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	2009-08-29 11:56:27 +00:00
tools	build fixes for squashfs4 on cygwin	2009-08-27 19:47:13 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile
Config.in	add menuconfig option for selecting initramfs compression	2009-08-16 05:35:34 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org