mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-20 22:48:10 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
39,087 Commits 8 Branches 72 Tags 240 MiB
C 60.6%
Makefile 19.7%
Shell 7%
Roff 6.8%
Perl 2.6%
Other 3.2%
f683385e73
Go to file
Alex Maclean f683385e73 ramips: add support for TP-Link RE350 
The TP-Link RE350 is a wall-wart AC1200 range extender/access point with
a single gigabit ethernet port and two non-detachable antennas, based on
the MT7621A SoC with MT7603E and MT7612E radios.

Firmware wise it is very similar to the QCA based RE450.

SoC: MediaTek MT7621A (880MHz)
Flash: 8MiB (Winbond W25Q64)
RAM:   64MiB (DDR2)
Ethernet: 1x 1Gbit
Wireless: 2T2R 2.4Ghz (MT7603E) and 5GHz (MT7612E)
LEDs: Power, 2.4G, 5G (blue), WPS (red and blue), ethernet link/act
(green)
Buttons: On/off, LED, reset, WPS

Serial header at J1, 57600 8n1:
Pin 1 TX
Pin 2 RX
Pin 3 GND
Pin 4 3.3V

Factory image can be uploaded directly through the stock UI.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2017-07-25 21:02:53 +02:00
.github github: include pull request template 2017-03-12 17:38:31 +01:00
config build: enable gzipping of images on x86 even if ext4 is disabled 2017-07-06 11:30:33 +02:00
include build: move mktplinkfw-combined command to image-commands.mk 2017-07-22 23:29:50 +02:00
package ath9k: fix regression in multicast buffering fix 2017-07-25 19:48:18 +02:00
scripts build: bundle-libraries.sh: do not override argv[0] in inner exec calls 2017-07-24 13:39:21 +02:00
target ramips: add support for TP-Link RE350 2017-07-25 21:02:53 +02:00
toolchain toolchain/arc: update to the most recent release arc-2017.03 2017-07-18 23:23:27 +02:00
tools firmware-utils: tplink-safeloader: add support for TP-Link RE350 2017-07-25 21:02:53 +02:00
.gitattributes
.gitignore gitignore: add /overlay 2017-01-15 18:16:29 +01:00
BSDmakefile
Config.in
feeds.conf.default Add video feed to feeds.conf.default 2017-01-25 16:04:39 +01:00
LICENSE
Makefile build: prepare config.seed before package compilation 2017-03-18 12:08:04 +01:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk rules.mk: make PKG_CONFIG_DEPENDS properly track string values 2017-02-27 23:46:53 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org