Daniel Golle f16dc4b42f mediatek: add support for BananaPi BPI-R4 board ... Hardware -------- SOC: MediaTek MT7988A (4x Cortex-A73) RAM: 4 GiB DDR4 Flash: 128 MiB Winbond SPI-NAND MMC: 8 GiB eMMC *or* microSD (cannot be used both) ETH: 4x 1GE (1x WAN, 3x LAN) 2x SFP+ (10G, 5G, 2.5G, 1G) USB: on-board USB 3.2 4-port hub 1x USB 3.2 port (type A connector) 1x M.2 for 4G/5G modem 2x mPCIe for additional modems WiFi: optional MediaTek MT7996 Wi-Fi 7 module (using 2x PCIe gen3 x2 on the mPCIe slots and 12V power) Installation ------------ 1. Decompress and write the sdcard image to a micro SD card and use that to boot the R4 (both dip switches in upper position). 2. Use the bootloader menu accessible via the serial console to install to SPI-NAND. 3. Switch to boot from SPI-NAND and install to eMMC. Known issues ------------ - The RST button is hard-wired to the SoC reset and can't be read from software. This can be changed by modifying the board (ie. moving a 0-ohm resistor). However, in order to maintain compatibility with the board as it comes from factory the button isn't used by OpenWrt and the WPS button is used as factory/reset button instead. - various small things still need to be fixed in DT Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2024-02-15 19:30:08 +00:00
..
imagebuilder	Revert "build: align SOURCE path for build system and SDK"	2024-02-12 19:03:17 +00:00
linux	mediatek: add support for BananaPi BPI-R4 board	2024-02-15 19:30:08 +00:00
llvm-bpf
sdk	tools: add ledumon and ledhwbmon packages	2023-12-12 19:35:03 +01:00
toolchain
Config.in
Makefile