mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 14:08:17 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
31,162 Commits 8 Branches 72 Tags 240 MiB
C 60.7%
Makefile 19.7%
Shell 7%
Roff 6.8%
Perl 2.6%
Other 3.1%
efbdc168ff
Go to file
John Crispin efbdc168ff ar71xx: fix ethernet packet loss issues on OM5P-AN 
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.

The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 45438
2015-04-14 19:00:51 +00:00
config build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
docs docs: Fix typo buysbox -> busybox. 2015-04-09 10:32:26 +00:00
include opkg: drop md5 in favour of sha256 2015-04-14 19:00:14 +00:00
package opkg: drop md5 in favour of sha256 2015-04-14 19:00:14 +00:00
scripts scripts/ipkg: remove file, it is obsolete 2015-03-29 07:35:36 +00:00
target ar71xx: fix ethernet packet loss issues on OM5P-AN 2015-04-14 19:00:51 +00:00
toolchain uClibc: backport sync_file_range fixes (closes: #19350) 2015-04-02 23:21:30 +00:00
tools tools: build ccache when building the sdk (fixes #13949) 2015-04-03 19:42:38 +00:00
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
LICENSE
Makefile build: clean up sitefiles, make them per-arch 2015-03-28 13:38:34 +00:00
README Add 'subversion' build dependency to README 2014-08-31 12:06:32 +00:00
rules.mk build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org