mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-10-19 14:08:17 +02:00
6bf0e76494
This is the first commit to introduce the base for the N821 board used
in Cisco vEdge 1000.
This commit does not include the custom CPLD drivers but rather
everything else that is already present in the upstream kernel.
This results in an image that boots, but e.g. the SFP ports are not
usable.
Hardware:
- CPU: Cavium Networks CN6130, 4 cores @ 1.0 GHz
- Flash:
- 16 MiB SPI NOR presented as 2x8 MiB for A/B boot recovery
- 8192 MiB eMMC
- RAM: 4096 MiB
- Ethernet 1Gbit ports: 1x
- Ethernet SFP ports: 8x
- USB ports: 2x 3.0 Type-A on front panel
- Serial: Two, one internal and one external
- JTAG: Yes
- LED count: 18x
- Button count: 1x
- GPIOs: 1x
- Power: 2x redundant DC 12V barrel plug
- Extra: Slot for SD card on front
See the OpenWrt wiki for more hardware details.
Installation:
- Flash squashfs to /dev/sda2 and put kernel on /dev/sda1.
- Update uboot's bootcmd environment variable to match.
Full installation guide will be added to OpenWrt wiki when sysupgrade
support is added.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Signed-off-by: Tommy Nevtelen <tommy@nevtelen.com>
Tested-by: Viktor Ekmark <viktor@ekmark.se>
Tested-by: Daniel Wennberg <github@networkninja.se>
116 lines
3.4 KiB
Makefile
116 lines
3.4 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2009-2010 OpenWrt.org
|
|
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Build/append-dtb-to-elf
|
|
$(TARGET_CROSS)objcopy --update-section .appended_dtb=$(KDIR)/image-$(DEVICE_DTS).dtb $@
|
|
endef
|
|
|
|
define Build/strip-kernel
|
|
# Workaround pre-SDK-1.9.0 u-boot versions not handling the .notes section
|
|
$(TARGET_CROSS)strip -R .notes $@ -o $@.stripped && mv $@.stripped $@
|
|
endef
|
|
|
|
DTS_DIR := $(DTS_DIR)/cavium-octeon
|
|
|
|
define Device/Default
|
|
PROFILES = Default $$(DEVICE_NAME)
|
|
KERNEL_NAME := vmlinux.elf
|
|
KERNEL_INITRAMFS_NAME := vmlinux-initramfs.elf
|
|
KERNEL := kernel-bin | strip-kernel | patch-cmdline
|
|
IMAGES := sysupgrade.tar
|
|
IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-extra 128k | sysupgrade-tar rootfs=$$$$@
|
|
IMAGE/sysupgrade.tar := sysupgrade-tar
|
|
endef
|
|
|
|
define Device/generic
|
|
DEVICE_VENDOR := Generic
|
|
DEVICE_MODEL := Octeon
|
|
FILESYSTEMS := ext4
|
|
endef
|
|
TARGET_DEVICES += generic
|
|
|
|
ITUSROUTER_CMDLINE:=console=ttyS0,115200 root=/dev/mmcblk1p2 rootfstype=squashfs,ext4,f2fs rootwait
|
|
define Device/itus_shield-router
|
|
DEVICE_VENDOR := Itus Networks
|
|
DEVICE_MODEL := Shield Router
|
|
CMDLINE := $(ITUSROUTER_CMDLINE)
|
|
IMAGE/sysupgrade.tar/squashfs += | append-metadata
|
|
endef
|
|
TARGET_DEVICES += itus_shield-router
|
|
|
|
ER_CMDLINE:=-mtdparts=phys_mapped_flash:640k(boot0)ro,640k(boot1)ro,64k(eeprom)ro root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
|
|
define Device/ubnt_edgerouter
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := EdgeRouter
|
|
BOARD_NAME := er
|
|
CMDLINE := $(ER_CMDLINE)
|
|
SUPPORTED_DEVICES += er
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter
|
|
|
|
define Device/ubnt_edgerouter-e300
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-leds-gpio kmod-of-mdio kmod-sfp kmod-usb3 kmod-usb-dwc3 kmod-usb-storage-uas
|
|
KERNEL := kernel-bin | patch-cmdline | append-dtb-to-elf
|
|
KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts)
|
|
CMDLINE := root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
|
|
endef
|
|
|
|
define Device/ubnt_edgerouter-4
|
|
$(Device/ubnt_edgerouter-e300)
|
|
DEVICE_MODEL := EdgeRouter 4
|
|
DEVICE_DTS := cn7130_ubnt_edgerouter-4
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-4
|
|
|
|
define Device/ubnt_edgerouter-6p
|
|
$(Device/ubnt_edgerouter-e300)
|
|
DEVICE_MODEL := EdgeRouter 6P
|
|
DEVICE_DTS := cn7130_ubnt_edgerouter-6p
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-6p
|
|
|
|
ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait
|
|
define Device/ubnt_edgerouter-lite
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := EdgeRouter Lite
|
|
BOARD_NAME := erlite
|
|
CMDLINE := $(ERLITE_CMDLINE)
|
|
SUPPORTED_DEVICES += erlite
|
|
endef
|
|
TARGET_DEVICES += ubnt_edgerouter-lite
|
|
|
|
define Device/ubnt_unifi-usg
|
|
$(Device/ubnt_edgerouter-lite)
|
|
DEVICE_MODEL := UniFi Security Gateway
|
|
BOARD_NAME := ubnt,usg
|
|
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-leds-gpio
|
|
DEVICE_DTS := cn5020_ubnt_usg
|
|
KERNEL += | append-dtb-to-elf
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-usg
|
|
|
|
define Device/cisco_vedge1000
|
|
DEVICE_VENDOR := Cisco Viptela
|
|
DEVICE_MODEL := vEdge 1000
|
|
BOARD_NAME := cisco,vedge1000
|
|
DEVICE_PACKAGES += \
|
|
kmod-hwmon-jc42 \
|
|
kmod-hwmon-max6697 \
|
|
kmod-of-mdio \
|
|
kmod-rtc-ds1307 \
|
|
kmod-usb-dwc3 \
|
|
kmod-usb-storage-uas \
|
|
kmod-usb3
|
|
KERNEL := kernel-bin | append-dtb-elf
|
|
KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts)
|
|
DEVICE_DTS := cn6130_cisco_vedge1000
|
|
endef
|
|
TARGET_DEVICES += cisco_vedge1000
|
|
|
|
$(eval $(call BuildImage))
|