openwrt

mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-02 00:51:21 +02:00

OpenWrt Source Repository https://openwrt.org/

Go to file

Gabor Juhos eb990941a1 use subsys_initcall in the i2c-gpio driver SVN-Revision: 16787		2009-07-11 19:14:01 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff	2009-07-11 12:48:59 +00:00
package	upgrade iproute2 to 2.6.29-1 - includes support for the skbedit scheduler action	2009-07-11 14:05:54 +00:00
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	2009-06-08 21:17:58 +00:00
target	use subsys_initcall in the i2c-gpio driver	2009-07-11 19:14:01 +00:00
toolchain	move the toolchain_install stampfile to the right place to fix spurious missing toolchain errors after cleaning stuff	2009-07-11 12:48:59 +00:00
tools	increase size of the kernel partition on the TL-WR[789]41N boards	2009-07-11 17:20:46 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile
Config.in	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README
rules.mk	add a config option to select the binary stripping method to use (between none, strip & sstrip)	2009-07-07 02:34:58 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org