1
0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 05:58:53 +02:00
OpenWrt Source Repository https://openwrt.org/
Go to file
Jonas Gorski e9650d4557 netfilter.mk: fix redirect module locations for 3.19+
ntf_redir_ipvX is part of NAT support, so they should be in the
appropriate nft-nat kmods. Since they depend on nf_nat_redirect,
nf_nat_redirect should be part of nf-nat, not ipt-nat.

Fixes nft-core gaining a missing dependency on nf_nat_redirect.ko.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46109
2015-06-22 12:27:25 +00:00
config gcc/musl: rework SSP-support 2015-06-22 10:31:07 +00:00
docs docs: Fix typo buysbox -> busybox. 2015-04-09 10:32:26 +00:00
include netfilter.mk: fix redirect module locations for 3.19+ 2015-06-22 12:27:25 +00:00
package otrx: add extra compilation check before using __BYTE_ORDER 2015-06-22 07:51:00 +00:00
scripts ipkg-build: suppress timestamps in gzip headers 2015-06-18 06:41:45 +00:00
target b53: Allow using all 8 ports on BCM53011 2015-06-21 21:06:09 +00:00
toolchain gcc/musl: rework SSP-support 2015-06-22 10:31:07 +00:00
tools ar71xx: add support for TL-WR720N-v4. 2015-06-18 18:21:23 +00:00
.gitattributes
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in scripts/config: sync with linux upstream 2015-01-08 14:33:53 +00:00
feeds.conf.default feeds.conf.default: add new targets feed 2015-03-19 11:58:35 +00:00
LICENSE
Makefile Makefile: move the cleaning of staging_dir/target* from dirclean to clean 2015-06-14 17:47:16 +00:00
README
rules.mk toolchain: switch to musl by default, except for mips64 2015-06-15 23:05:08 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org