Dmytro Oz c2a7bb520a ramips: mt7621: add support for Xiaomi Mi Router 4 ... Xiaomi Mi Router 4 is the same as Xiaomi Mi Router 3G, except for the RAM (256Mib→128Mib), LEDs and gpio (MiNet button). Specifications: Power: 12 VDC, 1 A Connector type: barrel CPU1: MediaTek MT7621A (880 MHz, 4 cores) FLA1: 128 MiB (ESMT F59L1G81MA) RAM1: 128 MiB (ESMT M15T1G1664A) WI1 chip1: MediaTek MT7603EN WI1 802dot11 protocols: bgn WI1 MIMO config: 2x2:2 WI1 antenna connector: U.FL WI2 chip1: MediaTek MT7612EN WI2 802dot11 protocols: an+ac WI2 MIMO config: 2x2:2 WI2 antenna connector: U.FL ETH chip1: MediaTek MT7621A Switch: MediaTek MT7621A UART Serial [o] TX [o] GND [o] RX [ ] VCC - Do not connect it MAC addresses as verified by OEM firmware: use address source LAN *:c2 factory 0xe000 (label) WAN *:c3 factory 0xe006 2g *:c4 factory 0x0000 5g *:c5 factory 0x8000 Flashing instructions: 1.Create a simple http server (nginx etc) 2.set uart enable To enable writing to the console, you must reset to factory settings Then you see uboot boot, press the keyboard 4 button (enter uboot command line) If it is not successful, repeat the above operation of restoring the factory settings. After entering the uboot command line, type: setenv uart_en 1 saveenv boot 3.use shell in uart cd /tmp wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin wget http://"your_computer_ip:80"/openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-kernel1.bin kernel1 mtd write openwrt-ramips-mt7621-xiaomi_mir4-squashfs-rootfs0.bin rootfs0 nvram set flag_try_sys1_failed=1 nvram commit reboot 4.login to the router http://192.168.1.1/ Installation via Software exploit Find the instructions in the https://github.com/acecilia/OpenWRTInvasion Signed-off-by: Dmytro Oz <sequentiality@gmail.com> [commit message facelift, rebase onto shared DTSI/common device definition, bump uboot-envtools] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2021-01-21 22:53:19 +01:00
..
base-files	base-files: read all 3 bytes in get_magic_vfat() at once	2021-01-07 19:51:50 +01:00
boot	ramips: mt7621: add support for Xiaomi Mi Router 4	2021-01-21 22:53:19 +01:00
devel	trace-cmd: update to 2.9.1	2021-01-01 19:55:59 +01:00
firmware	linux-firmware: Add wil6210 firmware	2021-01-05 02:16:24 +00:00
kernel	bcm63xx-cfe: enable package for bcm4908	2021-01-18 07:39:09 +01:00
libs	mbedtls: update to 2.16.9	2021-01-18 00:49:14 +01:00
network	owipcalc: remove clone in cidr_contains6	2021-01-19 15:39:36 +01:00
system	rpcd: update to git HEAD	2021-01-07 00:21:23 +00:00
utils	lua: add -ldl for glibc builds	2021-01-06 15:38:57 -10:00
Makefile	build: always build package/kernel/linux	2020-10-15 13:25:58 +02:00