openwrt

mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-19 22:18:16 +02:00

OpenWrt Source Repository https://openwrt.org/

Go to file

Petr Štetiar db4b6535f8 ath79: Add support for Ubiquity Bullet M (XW) CPU: AR9342 SoC RAM: 64 MB DDR2 Flash: 8 MB NOR SPI Ports: 100 MBit (24V PoE in) WLAN: 2.4/5 GHz UART: 1 UART on PCB marked as J1 with 115200 8N1 config LEDs: Power, Ethernet, 4x RSSI LEDs (orange, red, 2x green) Buttons: Reset UART connection details .---------------------------------. \| \| [ETH] J1 [ANT] \| o VCC o RX o TX o GND \| `---------------------------------' Flashing instructions A) Serial console, U-Boot and TFTP 1. Connect to serial header J1 on the PCB 2. Power on device and enter U-Boot console 3. Set up TFTP server serving an OpenWrt initramfs build 4. Load initramfs build using the command tftpboot in the U-Boot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs OpenWrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy B) Experimental factory image flashing over SSH from airOS v6.1.7 1. You need to flash your UBNT M2HP with airOS v6.1.7 firmware no other airOS version is currently supported 2. git clone https://github.com/true-systems/ubnt-bullet-m2hp-openwrt-flashing 3. cd ubnt-bullet-m2hp-openwrt-flashing 4. make flash-factory FW_OWRT=/path/to/your/openwrt-ath79-generic-ubnt_bullet-m-xw-squashfs-factory.bin Tested only on Bullet M2HP. Signed-off-by: Petr Štetiar <ynezz@true.cz>		2018-11-26 12:05:38 +01:00
.github	build: Update README & github help	2018-07-08 09:41:53 +01:00
config	sunxi: fix build without ext4 rootfs	2018-09-29 17:23:11 +02:00
include	build: Introduce building of artifacts	2018-11-26 09:39:20 +01:00
package	valgrind: enable LTO and refresh patches	2018-11-26 09:44:42 +01:00
scripts	script: ipkg-build: honour $SOURCE_DATE_EPOCH	2018-11-08 11:52:33 +01:00
target	ath79: Add support for Ubiquity Bullet M (XW)	2018-11-26 12:05:38 +01:00
toolchain	glibc: update to latest 2.27 commit	2018-11-22 10:11:22 +01:00
tools	flex: Add a lex symlink	2018-11-25 19:23:03 +01:00
.gitattributes
.gitignore	.gitignore: add .project & .cproject for eclipse users	2018-01-17 11:07:17 +01:00
BSDmakefile
Config.in
feeds.conf.default	feeds: switch git.lede-project.org URLs to git.openwrt.org	2018-01-16 16:59:22 +01:00
LICENSE
Makefile	build: Unset CDPATH to avoid problems	2018-08-25 11:10:28 +02:00
README	build: README punctuation pendantry	2018-07-08 12:05:16 +01:00
rules.mk	rules.mk: add ESED command	2018-09-24 15:57:27 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org