da2b97210c
378b638c70c0 mt76: mt7915: fix unused variable with testmode disabled 4f4309542862 mt76: mt7915: only use u32_get_bits with constant value de06d828a0bf mt76: mt7921: fix injected MPDU transmission to not use HW A-MSDU c007ba3ec7a9 mt76: mt7915: simplify conditional 64c74dc93f68 mt76: fix dfs state issue with 160 MHz channels d3471b0d92c1 mt76: mt7615: honor ret from mt7615_mcu_restart in mt7663u_mcu_init f4c87b32e0e9 mt76: mt7663u: introduce mt7663u_mcu_power_on routine 82de5987af54 mt76: mt7921: fix up the monitor mode c501df4086e1 mt76: mt7921: use mt76_hw instead of open coding it 594ee03d5a11 mt76: mt7915: fix DFS no radar detection event d8d2b383a241 mt76: split single ldpc cap bit into bits 0f336fba20fe mt76: mt7921: make mt7921_init_tx_queues static 00a066ce9914 mt76: mt7921: fix xmit-queue dump for usb and sdio d6d2479568b2 mt76: mt7921: fix mt7921_queues_acq implementation d17b74420199 mt76: fix monitor mode crash with sdio driver c374559eae6f mt76: mt7915: allow beaconing on all chains b219af63b9ce mt76: connac: add 6 GHz support for wtbl and starec configuration 630384cb3246 mt76: mt7915: add 6 GHz support 28ff1bddc7e8 mt76: mt7915: fix eeprom fields of txpower init values d4b226cc15e7 mt76: mt7915: add txpower init for 6GHz 31e820d4ce4b mt76: mt7921: get rid of mt7921_wait_for_mcu_init declaration 9fee1faf6028 mt76: mt7915: check for devm_pinctrl_get() failure 31a970940b97 mt76: connac: make read-only array ba_range static const e49af7036bbc mt76: use le32/16_get_bits() whenever possible 0664d39039c2 mt76: fix invalid rssi report f16fc9d96105 mt76: mt7915: set band1 TGID field in tx descriptor 67ce2708dcef mt76: mt7915: fix beamforming mib stats 6e899abec818 mt76: mt7915: fix phy cap in mt7915_set_stream_he_txbf_caps() c6780c85cff2 mt76: mt7915: fix typos in comments aa6eadc09a83 mt76: usb: add req_type to ___mt76u_rr signature 74a519ab8353 mt76: usb: add req_type to ___mt76u_wr signature 2651d2c66cbd mt76: usb: introduce __mt76u_init utility routine c03e095eee27 mt76: mt7921: disable runtime pm for usb 41085cdcd7e3 mt76: mt7921: update mt7921_skb_add_usb_sdio_hdr to support usb e700aba6bae3 mt76: mt7921: move mt7921_usb_sdio_tx_prepare_skb in common mac code 056b7f4ebcc6 mt76: mt7921: move mt7921_usb_sdio_tx_complete_skb in common mac code. 0abf682a3def mt76: mt7921: move mt7921_usb_sdio_tx_status_data in mac common code. b0c60d5252de mt76: mt7921: add mt7921u driver 053668acdaf8 mt76: mt7921: move mt7921_init_hw in a dedicated work Signed-off-by: Felix Fietkau <nbd@nbd.name> |
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| LICENSES | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| COPYING | ||
| feeds.conf.default | ||
| Makefile | ||
| README.md | ||
| rules.mk | ||
OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.
Sunshine!
Development
To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.
Requirements
You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.
binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which
Quickstart
-
Run
./scripts/feeds update -ato obtain all the latest package definitions defined in feeds.conf / feeds.conf.default -
Run
./scripts/feeds install -ato install symlinks for all obtained packages into package/feeds/ -
Run
make menuconfigto select your preferred configuration for the toolchain, target system & firmware packages. -
Run
maketo build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.
Related Repositories
The main repository uses multiple sub-repositories to manage packages of
different categories. All packages are installed via the OpenWrt package
manager called opkg. If you're looking to develop the web interface or port
packages to OpenWrt, please find the fitting repository below.
-
LuCI Web Interface: Modern and modular interface to control the device via a web browser.
-
OpenWrt Packages: Community repository of ported packages.
-
OpenWrt Routing: Packages specifically focused on (mesh) routing.
-
OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).
Support Information
For a list of supported devices see the OpenWrt Hardware Database
Documentation
Support Community
- Forum: For usage, projects, discussions and hardware advise.
- Support Chat: Channel
#openwrton oftc.net.
Developer Community
- Bug Reports: Report bugs in OpenWrt
- Dev Mailing List: Send patches
- Dev Chat: Channel
#openwrt-develon oftc.net.
License
OpenWrt is licensed under GPL-2.0