Tobias Schramm d78e229903 ath79: Add support for Ubiquiti NanoBeam AC ... The NanoBeam is a small AR9342 based directional 5 GHz AC CPE with hardware almost identical to the Ubiquiti NanoStation AC loco. Over the NanoStation AC loco it has 5 additional LEDs. Four of those LEDs are used as rssi indicators, the fifth LED is used as an ethernet link/activity indicator. CPU: Atheros AR9342 SoC RAM: 64 MB DDR2 Flash: 16 MB NOR SPI WLAN: QCA988X Ports: 1x GbE Flashing procedure is identical to the NanoStation AC loco and can be performed either via serial or the factory firmware upgrade. Serial flashing: 1. Connect to serial header on device (8N1 115200) 2. Power on device and enter uboot console 3. Set up tftp server serving an openwrt initramfs build 4. Load initramfs build using the command tftpboot in the uboot cli 5. Boot the loaded image using the command bootm 6. Copy squashfs openwrt sysupgrade build to the booted device 7. Use mtd to write sysupgrade to partition "firmware" 8. Reboot and enjoy Flashing through factory firmware: 1. Ensure firmware version v8.5.0.36727 is installed. Up/downgrade to this exact version. 2. Patch fwupdate.real binary using `hexdump -Cv /bin/ubntbox | sed 's/14 40 fe fe/00 00 00 00/g' | hexdump -R > /tmp/fwupdate.real` 3. Make the patched fwupdate.real binary executable using `chmod +x /tmp/fwupdate.real` 4. Copy the squashfs factory image to /tmp on the device 5. Flash OpenWRT using `/tmp/fwupdate.real -m <squashfs-factory image>` 6. Wait for the device to reboot Thanks to @cybermaus for testing! Tested-by: Maurits van Dueren den Hollander <cybermaus@gmail.com> Signed-off-by: Tobias Schramm <tobleminer@gmail.com>		2019-03-22 00:40:29 +01:00
..
ar724x.dtsi	ath79: add pinmux node to ar724x.dtsi	2018-06-01 08:23:02 +02:00
ar934x.dtsi	ath79: ar934x: assert mac/mdio reset together for gmac0	2019-03-05 03:02:34 +01:00
ar1022_iodata_wn-ag300dgr.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7100.dtsi	ath79: fix dtc compiler warnings	2018-12-12 12:28:26 +01:00
ar7161_buffalo_wzr-hp-ag300h.dts	ath79: dts: Unify naming of gpio-keys nodes	2019-01-26 21:09:12 +01:00
ar7161_dlink_dir-825-b1.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7161_jjplus_ja76pf2.dts	ath79: add support for jjPlus JA76PF2	2019-03-18 20:43:09 +01:00
ar7161_netgear_wndr3700.dts	ath79: specify "firmware" partition format for WNDR3700 and v2	2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3700.dtsi	ath79: dts: Unify naming of gpio-keys nodes	2019-01-26 21:09:12 +01:00
ar7161_netgear_wndr3700v2.dts	ath79: specify "firmware" partition format for WNDR3700 and v2	2018-11-24 13:15:55 +01:00
ar7161_netgear_wndr3800.dts	ath79: specify "firmware" partition format for Netgear WNDR3800	2018-11-24 08:46:59 +01:00
ar7161_ubnt_routerstation-pro.dts	ath79: add syscon compatible property to ar7100 ethernet nodes	2018-09-06 21:35:53 +02:00
ar7161_ubnt_routerstation.dts	ath79: initial support for Ubiquiti RouterStation and RouterStation Pro	2018-08-27 19:31:17 +02:00
ar7161_ubnt_routerstation.dtsi	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar7240_buffalo_whr-g301n.dts	ath79: dts: Unify naming of gpio-keys nodes	2019-01-26 21:09:12 +01:00
ar7240_netgear_wnr612-v2.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_netgear_wnr612-v2.dtsi	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar7240_on_n150r.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr74xn-v1.dtsi	ath79: dts: Unify naming of gpio-keys nodes	2019-01-26 21:09:12 +01:00
ar7240_tplink_tl-wr740n-v1.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr740n-v3.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr741-v1.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr743nd-v1.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr841-v5.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240_tplink_tl-wr941-v4.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7240.dtsi	ath79: fix dts warnings	2018-08-08 08:11:11 +02:00
ar7241_tplink_tl-mr3x20.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3220-v1.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-mr3420-v1.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7241_tplink_tl-wr841-v7.dts	ath79: rename TP-LINK to TP-Link	2019-02-14 16:56:14 +01:00
ar7241_tplink_tl-wr842n-v1.dts	ath79: add support for TP-Link TL-WR842N/ND v1 router	2018-12-15 21:35:45 +01:00
ar7241_tplink.dtsi	ath79: dts: Unify naming of gpio-keys nodes	2019-01-26 21:09:12 +01:00
ar7241_ubnt_airrouter.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7241_ubnt_bullet-m.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7241_ubnt_nanostation-m.dts	ath79: align naming of Ubiquiti Nanostation M	2019-03-18 20:55:24 +01:00
ar7241_ubnt_rocket-m.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar7241_ubnt_unifi.dts	ath79: Define firmware partition format to all boards where applicable	2018-12-06 13:28:22 +01:00
ar7241_ubnt_xm_outdoor.dtsi	ath79: split ubnt outdoor device leds into separate dtsi	2018-12-03 07:58:49 +01:00
ar7241_ubnt_xm.dtsi	ath79: Define firmware partition format to all boards where applicable	2018-12-06 13:28:22 +01:00
ar7241.dtsi	ath79: fix dts warnings	2018-08-08 08:11:11 +02:00
ar7242_avm_fritz300e.dts	ath79: dts: Unify naming of gpio-keys nodes	2019-01-26 21:09:12 +01:00
ar7242_buffalo_bhr-4grv.dts	ath79: fix MAC address for Buffalo BHR-4GRV	2018-10-07 10:46:20 +02:00
ar7242_buffalo_wzr-bhr.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g302h-a1a0.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7242_buffalo_wzr-hp-g450h.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar7242_tplink_tl-wr2543-v1.dts	ath79: rename TP-LINK to TP-Link	2019-02-14 16:56:14 +01:00
ar7242.dtsi	ath79: Add switch reset definition in dts	2018-07-30 10:43:35 +02:00
ar9132_tplink_tl-wa901nd-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr941-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9132_tplink_tl-wr1043nd-v1.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
ar9132.dtsi	ath79: ag71xx: apply interface mode to MII0/1_CTRL on ar71xx/ar913x	2018-08-28 11:26:53 +02:00
ar9330_glinet_gl-ar150.dts	ath79: fix boardname of GL.iNet GL-AR150	2018-12-31 14:05:26 +01:00
ar9330_pqi_air-pen.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9330.dtsi	ath79: fix dts warnings	2018-08-08 08:11:11 +02:00
ar9331_dptechnics_dpt-module.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_dragino_ms14.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_embeddedwireless_dorin.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_etactica_eg200.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_onion_omega.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_pisen_wmm003n.dts	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-mr10u.dts	ath79: rename dts/image using manufacturer_board scheme	2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-mr3020-v1.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-mr3040-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9331_tplink_tl-wr703n_tl-mr10u.dtsi	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar9331_tplink_tl-wr703n.dts	ath79: rename dts/image using manufacturer_board scheme	2018-08-06 07:31:54 +02:00
ar9331_tplink_tl-wr740n-v4.dts	ath79: rename TL-WR740ND-v4 to TL-WR740N-v4	2019-02-14 16:56:14 +01:00
ar9331_tplink_tl-wr741nd-v4.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar9331_tplink_tl-wr741nd-v4.dtsi	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar9331.dtsi	ath79: add tl-mr3020-v1 support	2018-06-08 12:19:49 +02:00
ar9341_pcs_cr3000.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9341_tplink_tl-wr841-v8.dts	ath79: add support for TP-Link TL-WR841N/ND v8	2018-12-31 13:28:31 +01:00
ar9341_tplink_tl-wr842n-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9341.dtsi	ath79: ar934x: Update dts for current ag71xx driver	2018-07-30 10:43:33 +02:00
ar9342_iodata_etg3-r.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9342_ubnt_bullet-m-xw.dts	ath79: ubnt-bullet-m-xw: Remove eth1 disabled node	2018-12-27 16:02:25 +01:00
ar9342_ubnt_lap-120.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanobeam-ac.dts	ath79: Add support for Ubiquiti NanoBeam AC	2019-03-22 00:40:29 +01:00
ar9342_ubnt_nanostation-ac-loco.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar9342_ubnt_nanostation-ac.dts	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar9342_ubnt_nanostation-m-xw.dts	ath79: Add support for Ubiquiti Nanostation M (XW)	2019-03-05 03:15:52 +01:00
ar9342_ubnt_wa.dtsi	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar9342_ubnt_xw.dtsi	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
ar9344_comfast_cf-e120a-v3.dts	ath79: add support for COMFAST CF-E120A v3	2019-02-28 11:26:10 +01:00
ar9344_dlink_dir-8x5.dtsi	ath79: add d-link dir-825-c1 and dir-835-a1	2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-825-c1.dts	ath79: add d-link dir-825-c1 and dir-835-a1	2018-12-17 00:21:34 +01:00
ar9344_dlink_dir-835-a1.dts	ath79: add d-link dir-825-c1 and dir-835-a1	2018-12-17 00:21:34 +01:00
ar9344_ocedo_raccoon.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9344_pcs_cap324.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9344_pcs_cr5000.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9344_tplink_tl-wdr3600.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar9344_tplink_tl-wdr4300.dts	ath79: add SoC or family compatible	2018-12-06 13:28:22 +01:00
ar9344_tplink_tl-wdr4300.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9344_wd_mynet-wifi-rangeextender.dts	ath79: add support for WD My Net Wi-Fi Range Extender	2018-09-10 09:07:41 +02:00
ar9344_winchannel_wb2000.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
ar9344.dtsi	ath79: fix dts warnings	2018-08-08 08:11:11 +02:00
ath79.dtsi	ath79: ar934x: Update dts for current ag71xx driver	2018-07-30 10:43:33 +02:00
qca953x_tplink_tl-wr810n.dtsi	ath79: Add support for TP-Link WR810N	2018-12-31 14:18:19 +01:00
qca953x.dtsi	ath79: fix wmac memory region for qca953x	2019-02-20 18:51:31 +01:00
qca956x.dtsi	ath79: fix pinmux reg value for QCA956x	2018-12-24 19:18:07 +01:00
qca9531_engenius_ews511ap.dts	ath79: add support for EnGenius EWS511AP	2018-12-31 16:25:09 +01:00
qca9531_glinet_gl-ar300m-lite.dts	ath79: Add GL.iNet AR-300M-Lite	2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nand.dts	ath79: Add GL.iNet AR-300M-Lite	2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m-nor.dts	ath79: Add GL.iNet AR-300M-Lite	2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-ar300m.dtsi	ath79: Add GL.iNet AR-300M-Lite	2019-03-13 16:25:34 +01:00
qca9531_glinet_gl-x750.dts	ath79: Modify glinet x750 and AR300m MAC address offsets	2019-02-28 11:32:55 +01:00
qca9531_tplink_tl-wr810n-v1.dts	ath79: Add support for TP-Link WR810N	2018-12-31 14:18:19 +01:00
qca9531_yuncore_a770.dts	ath79: add support for YunCore A770	2019-03-09 16:31:17 +01:00
qca9533_comfast_cf-e110n-v2.dts	ath79: add support for COMFAST CF-E110N	2018-12-31 16:25:11 +01:00
qca9533_tplink_tl-wr810n-v2.dts	ath79: Add support for TP-Link WR810N	2018-12-31 14:18:19 +01:00
qca9533_tplink_tl-wr841-v9.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9533_tplink_tl-wr841-v11.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9533_tplink_tl-wr841.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9557_buffalo_bhr-4grv2.dts	ath79: dts: Unify naming of gpio-led nodes	2019-01-26 21:09:12 +01:00
qca9557_iodata_wn-ac1167dgr.dts	ath79: add support for I-O DATA WN-AC1600DGR	2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr2.dts	ath79: add support for I-O DATA WN-AC1600DGR	2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac1600dgr.dts	ath79: add support for I-O DATA WN-AC1600DGR	2019-02-14 16:56:15 +01:00
qca9557_iodata_wn-ac-dgr.dtsi	ath79: add support for I-O DATA WN-AC1600DGR	2019-02-14 16:56:15 +01:00
qca9557.dtsi	ath79: qca955x: assert mdio/gmac reset together	2019-03-05 03:02:34 +01:00
qca9558_devolo_dvl1xxx.dtsi	ath79: add support for devolo WiFi pro 1200e	2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200e.dts	ath79: add support for devolo WiFi pro 1200e	2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1200i.dts	ath79: add support for devolo WiFi pro 1200i	2019-01-05 21:55:22 +01:00
qca9558_devolo_dvl1750c.dts	ath79: add support for devolo WiFi pro 1750c	2018-12-27 14:06:38 +01:00
qca9558_devolo_dvl1750e.dts	ath79: add support for Devolo WiFi Pro 1750e	2019-01-26 21:46:33 +01:00
qca9558_devolo_dvl1750i.dts	ath79: add support for devolo WiFi pro 1750i	2019-01-05 21:55:22 +01:00
qca9558_engenius_epg5000.dts	ath79: fix leds description for EnGenius EPG5000	2019-03-18 20:42:29 +01:00
qca9558_librerouter_librerouter-v1.dts	ath79: add support for LibreRouter v1	2019-03-13 16:25:34 +01:00
qca9558_ocedo_koala.dts	ath79: fix OCEDO Koala ethernet configuration	2018-12-30 20:08:13 +01:00
qca9558_openmesh_om5p-ac-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9558_tplink_archer-c5-v1.dts	ath79: add support for TP-Link Archer C5 v1	2019-02-28 11:32:55 +01:00
qca9558_tplink_archer-c7-v1.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7-v2.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9558_tplink_archer-c7.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9558_tplink_re350k-v1.dts	ath79: add support for TP-Link RE350K v1	2019-03-11 22:00:26 +01:00
qca9558_tplink_tl-wdr4900-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9558_tplink_tl-wr1043nd-v2.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd-v3.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9558_tplink_tl-wr1043nd.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9561_avm_fritz4020.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9561_tplink_archer-c5x.dtsi	ath79: add support for Archer C58/C59 v1	2018-11-26 12:05:45 +01:00
qca9561_tplink_archer-c58-v1.dts	ath79: rename TP-LINK to TP-Link	2019-02-14 16:56:14 +01:00
qca9561_tplink_archer-c59-v1.dts	ath79: rename TP-LINK to TP-Link	2019-02-14 16:56:14 +01:00
qca9561_xiaomi_mi-router-4q.dts	ath79: add support for Xiaomi Mi Router 4Q	2019-02-11 19:04:06 +01:00
qca9563_dlink_dir-859-a1.dts	ath79: add support for D-Link DIR-859 A1	2018-12-30 20:08:13 +01:00
qca9563_elecom_wrc-300ghbk2-i.dts	ath79: add support for ELECOM WRC-1750GHBK2-I/C	2018-12-31 21:38:53 +09:00
qca9563_elecom_wrc-1750ghbk2-i.dts	ath79: add support for ELECOM WRC-1750GHBK2-I/C	2018-12-31 21:38:53 +09:00
qca9563_elecom_wrc-ghbk2-i.dtsi	ath79: add support for ELECOM WRC-1750GHBK2-I/C	2018-12-31 21:38:53 +09:00
qca9563_glinet_gl-ar750s.dts	ath79: align GL-AR750S boardname to other GL.iNet devices	2019-01-01 19:42:41 +01:00
qca9563_nec_wg800hp.dts	ath79: add support for NEC Aterm WG800HP	2018-12-24 19:18:07 +01:00
qca9563_phicomm_k2t.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9563_rosinson_wr818.dts	ath79: tweak the position of factory partition for wr818	2018-12-31 16:37:09 +01:00
qca9563_tplink_archer-a7-v5.dts	ath79: add support for TP-Link Archer A7	2018-12-17 08:09:13 +01:00
qca9563_tplink_archer-c2-v3.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9563_tplink_archer-c6-v2.dts	ath79: add support for TP-Link Archer C6 v2	2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-c7-v4.dts	ath79: TP-Link Archer C7 v4 swap usb led names	2019-03-02 12:59:48 +01:00
qca9563_tplink_archer-c7-v5.dts	ath79: add support for TP-Link Archer C7 v5	2018-12-27 14:06:38 +01:00
qca9563_tplink_archer-x6-v2.dtsi	ath79: add support for TP-Link Archer C6 v2	2018-12-31 16:25:11 +01:00
qca9563_tplink_archer-x7-v5.dtsi	ath79: dts: Remove newly added default-state=off property	2018-12-17 14:22:28 +01:00
qca9563_tplink_re450-v2.dts	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9563_tplink_tl-wr1043n.dtsi	treewide: dts: Remove default-state=off property from all gpio LED nodes	2018-12-17 08:16:28 +01:00
qca9563_tplink_tl-wr1043nd-v4.dts	ath79: make TP-Link revision naming consistent	2019-03-02 13:04:54 +01:00
qca9563_ubnt_unifiac-lite.dts	ath79: add support for Unifi AC Mesh	2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi	ath79: add support for Unifi AC Mesh	2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts	ath79: add support for UniFi AC-Mesh Pro	2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts	ath79: add support for Unifi AC Mesh	2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts	ath79: add support for UniFi AC-Mesh Pro	2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi	ath79: add support for UniFi AC-Mesh Pro	2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi	ath79: Fix UBNT Unifi AC LEDs	2018-12-31 13:28:31 +01:00