mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-09 08:16:26 +02:00
8299d1f057
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted patches, wireless patches and defconfig patches. bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 4B v1.1 4G bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
80 lines
3.0 KiB
Diff
80 lines
3.0 KiB
Diff
From 9bb199ebcdb864f9ec5df0e168df4a25820482ea Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Thu, 11 Jun 2020 09:57:03 +0100
|
|
Subject: [PATCH] PCI: brcmstb: Add DT property to control L1SS
|
|
|
|
The BRCM PCIe block has controls to enable control of the CLKREQ#
|
|
signal by the L1SS, and to gate the refclk with the CLKREQ# input.
|
|
These controls are mutually exclusive - the upstream code sets the
|
|
latter, but some use cases require the former.
|
|
|
|
Add a Device Tree property - brcm,enable-l1ss - to switch to the
|
|
L1SS configuration.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
drivers/pci/controller/pcie-brcmstb.c | 30 ++++++++++++++++++++-------
|
|
1 file changed, 23 insertions(+), 7 deletions(-)
|
|
|
|
--- a/drivers/pci/controller/pcie-brcmstb.c
|
|
+++ b/drivers/pci/controller/pcie-brcmstb.c
|
|
@@ -114,8 +114,9 @@
|
|
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
|
|
|
|
#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
|
|
-#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK 0x2
|
|
-#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
|
|
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK BIT(1)
|
|
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_L1SS_ENABLE_MASK BIT(21)
|
|
+#define PCIE_MISC_HARD_PCIE_HARD_DEBUG_SERDES_IDDQ_MASK BIT(27)
|
|
|
|
|
|
#define PCIE_INTR2_CPU_BASE 0x4300
|
|
@@ -276,6 +277,7 @@ struct brcm_pcie {
|
|
struct clk *clk;
|
|
struct device_node *np;
|
|
bool ssc;
|
|
+ bool l1ss;
|
|
int gen;
|
|
u64 msi_target_addr;
|
|
struct brcm_msi *msi;
|
|
@@ -1025,12 +1027,25 @@ static int brcm_pcie_setup(struct brcm_p
|
|
PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1_ENDIAN_MODE_BAR2_MASK);
|
|
writel(tmp, base + PCIE_RC_CFG_VENDOR_VENDOR_SPECIFIC_REG1);
|
|
|
|
- /*
|
|
- * Refclk from RC should be gated with CLKREQ# input when ASPM L0s,L1
|
|
- * is enabled => setting the CLKREQ_DEBUG_ENABLE field to 1.
|
|
- */
|
|
tmp = readl(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
- tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
|
|
+ if (pcie->l1ss) {
|
|
+ /*
|
|
+ * Enable CLKREQ# signalling include L1 Substate control of
|
|
+ * the CLKREQ# signal and the external reference clock buffer.
|
|
+ * meet requirement for Endpoints that require CLKREQ#
|
|
+ * assertion to clock active within 400ns.
|
|
+ */
|
|
+ tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
|
|
+ tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_L1SS_ENABLE_MASK;
|
|
+ } else {
|
|
+ /*
|
|
+ * Refclk from RC should be gated with CLKREQ# input when
|
|
+ * ASPM L0s,L1 is enabled => setting the CLKREQ_DEBUG_ENABLE
|
|
+ * field to 1.
|
|
+ */
|
|
+ tmp &= ~PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_L1SS_ENABLE_MASK;
|
|
+ tmp |= PCIE_MISC_HARD_PCIE_HARD_DEBUG_CLKREQ_DEBUG_ENABLE_MASK;
|
|
+ }
|
|
writel(tmp, base + PCIE_MISC_HARD_PCIE_HARD_DEBUG);
|
|
|
|
return 0;
|
|
@@ -1251,6 +1266,7 @@ static int brcm_pcie_probe(struct platfo
|
|
pcie->gen = (ret < 0) ? 0 : ret;
|
|
|
|
pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
|
|
+ pcie->l1ss = of_property_read_bool(np, "brcm,enable-l1ss");
|
|
|
|
ret = clk_prepare_enable(pcie->clk);
|
|
if (ret) {
|