mirror of
https://git.openwrt.org/openwrt/openwrt.git
synced 2024-06-09 00:06:26 +02:00
8299d1f057
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted patches, wireless patches and defconfig patches. bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 4B v1.1 4G bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
59 lines
1.6 KiB
Diff
59 lines
1.6 KiB
Diff
From dcfed6cdcd38f9b0ca706af74710969aa8082c38 Mon Sep 17 00:00:00 2001
|
|
From: popcornmix <popcornmix@gmail.com>
|
|
Date: Tue, 3 Sep 2019 20:28:00 +0100
|
|
Subject: [PATCH] clk-bcm2835: Disable v3d clock
|
|
|
|
This is controlled by firmware, see clk-raspberrypi.c
|
|
|
|
Signed-off-by: popcornmix <popcornmix@gmail.com>
|
|
---
|
|
drivers/clk/bcm/clk-bcm2835.c | 30 ++++++++++++------------------
|
|
1 file changed, 12 insertions(+), 18 deletions(-)
|
|
|
|
--- a/drivers/clk/bcm/clk-bcm2835.c
|
|
+++ b/drivers/clk/bcm/clk-bcm2835.c
|
|
@@ -1741,16 +1741,12 @@ static const struct bcm2835_clk_desc clk
|
|
.hold_mask = CM_PLLA_HOLDCORE,
|
|
.fixed_divider = 1,
|
|
.flags = CLK_SET_RATE_PARENT),
|
|
- [BCM2835_PLLA_PER] = REGISTER_PLL_DIV(
|
|
- SOC_ALL,
|
|
- .name = "plla_per",
|
|
- .source_pll = "plla",
|
|
- .cm_reg = CM_PLLA,
|
|
- .a2w_reg = A2W_PLLA_PER,
|
|
- .load_mask = CM_PLLA_LOADPER,
|
|
- .hold_mask = CM_PLLA_HOLDPER,
|
|
- .fixed_divider = 1,
|
|
- .flags = CLK_SET_RATE_PARENT),
|
|
+
|
|
+ /*
|
|
+ * PLLA_PER is used for gpu clocks. Controlled by firmware, see
|
|
+ * clk-raspberrypi.c.
|
|
+ */
|
|
+
|
|
[BCM2835_PLLA_DSI0] = REGISTER_PLL_DIV(
|
|
SOC_ALL,
|
|
.name = "plla_dsi0",
|
|
@@ -2051,14 +2047,12 @@ static const struct bcm2835_clk_desc clk
|
|
.int_bits = 6,
|
|
.frac_bits = 0,
|
|
.tcnt_mux = 3),
|
|
- [BCM2835_CLOCK_V3D] = REGISTER_VPU_CLK(
|
|
- SOC_ALL,
|
|
- .name = "v3d",
|
|
- .ctl_reg = CM_V3DCTL,
|
|
- .div_reg = CM_V3DDIV,
|
|
- .int_bits = 4,
|
|
- .frac_bits = 8,
|
|
- .tcnt_mux = 4),
|
|
+
|
|
+ /*
|
|
+ * CLOCK_V3D is used for v3d clock. Controlled by firmware, see
|
|
+ * clk-raspberrypi.c.
|
|
+ */
|
|
+
|
|
/*
|
|
* VPU clock. This doesn't have an enable bit, since it drives
|
|
* the bus for everything else, and is special so it doesn't need
|