mirror/openwrt
1
0
Fork 0
mirror of https://git.openwrt.org/openwrt/openwrt.git synced 2024-10-18 21:48:23 +02:00
Code Issues
OpenWrt Source Repository https://openwrt.org/
54,565 Commits 8 Branches 72 Tags 240 MiB
C 60.7%
Makefile 19.7%
Shell 7%
Roff 6.8%
Perl 2.6%
Other 3.1%
d12eb103e8
Go to file
Manuel Giganto d12eb103e8
hostapd: add ppsk option (private psk) 
This PR allows a user to enable a private psk, where each station
may have it's own psk or use a common psk if it is not defined.
The private psk is defined using the sta's mac and a radius server
is required.

ppsk option should be enabled in the wireless configuration along with
radius server details. When using PPSK, the key is ignored, it will be
retrieved from radius server. SAE is not yet supported (private sae) in
hostapd.

Wireless example configuration:
	option encryption 'psk2+ccmp'
	option ppsk '1'
	option auth_server '127.0.0.1'
	option auth_secret 'radiusServerPassword'

If you want to use dynamic VLAN on PPSK also include:
	option dynamic_vlan '2'
	option vlan_tagged_interface 'eth0'
	option vlan_bridge 'br-vlan'
	option vlan_naming '0'

It works enabling mac address verification on radius server and
requiring the tunnel-password (the private psk) from radius server.

In the radius server we need to configure the users. In case of
freeradius: /etc/freeradius3/mods-config/files/authorize
The user and Cleartext-Password should be the mac lower case using the
format "aabbccddeeff"

<sta mac> Cleartext-Password := "<sta mac>"
	Tunnel-Password = <Private Password>

Example of a user configured in radius and using dynamic VLAN5:

8cb84a000000 Cleartext-Password := "8cb84a000000"
	Tunnel-Type = VLAN,
	Tunnel-Medium-Type = IEEE-802,
	Tunnel-Private-Group-ID = 5,
	Tunnel-Password = MyPrivPw

If we want to have a default or shared psk, used when the mac is not
found in the list, we need to add the following at the end of the radius
authorize file:

DEFAULT Auth-Type := Accept
	Tunnel-Password = SharedPw

And if using VLANs, for example VLAN6 for default users:
DEFAULT Auth-Type := Accept
	Tunnel-Type = VLAN,
	Tunnel-Medium-Type = IEEE-802,
	Tunnel-Private-Group-ID = 6,
	Tunnel-Password = SharedPw

Signed-off-by: Manuel Giganto <mgigantoregistros@gmail.com>
2022-07-15 08:20:36 +02:00
.github CI: usability improvements for tools 2022-04-05 01:27:30 +02:00
config kernel: add KERNEL_DEBUG_VIRTUAL 2022-07-07 15:07:16 -07:00
include kernel: bump 5.15 to 5.15.53 2022-07-11 00:50:18 +02:00
LICENSES
package hostapd: add ppsk option (private psk) 2022-07-15 08:20:36 +02:00
scripts scripts: fix CAMEO tag generator 2022-07-05 10:18:06 +02:00
target ath79: fix Tx cleanup when NAPI poll budget is zero 2022-07-14 12:51:16 +02:00
toolchain toolchaini/gcc: fix libstdc++ dual abi model 2022-07-07 13:55:32 +02:00
tools automake: always use correct path for aclocal.real 2022-07-14 12:57:12 +02:00
.gitattributes
.gitignore .gitgnore: add llvm-bpf 2021-11-21 18:18:01 +01:00
BSDmakefile
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds: use git-src-full to allow Git versioning 2022-02-15 00:24:24 +01:00
Makefile build: don't remove BUILD_LOG_DIR in _clean 2022-04-30 23:56:43 +02:00
README.md README: mention video feed 2021-10-19 15:47:44 -10:00
rules.mk kernel: filter -no-plt from KCFLAGS 2022-06-21 16:41:17 +01:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Development

To build your own firmware you need a GNU/Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.6+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0